how to repair scratches on trex decking

1. Purchase a repair kit if you want to easily fix your deck. ...
2. Sand the scratch with a scratch repair pad or applicator tool. ...
3. Apply wax to the damaged area until it is level. Take off the tip of the wax stick, and rub it over the sanded area.
4. Rub the applicator over the wax to remove any excess. ...

How to repair deep scratches on Trex deck?

Here are a few ways to keep scratches at bay and maintain your deck:

• Use a woven rug designed for high-traffic spaces. A woven rug will help keep foot traffic from shoes from doing damage. ...
• Place pads under pieces of furniture that live on your deck. ...
• Put furniture away when it’s not in use. ...
• Use a broom instead of a shovel to clear leaves, snow or other debris. ...

How do you fix a hole in a Trex deck?

• Materials List.
• Clean the deck: Sweep excess debris (dirt and leaves) off the deck.
• Apply the composite deck stain: Stir product thoroughly.
• Clean-up: Following label directions, dispose of waste including roller covers and brushes in a water filled container.
• Frequently Asked Questions.
• Maintenance.

How to install Trex decking from the underside?

• Make all joists straight and square.
• Add outlets to the gutter every 12′ – 14′.
• Cover all joists and blocking with trough material, then tape.
• Finally, cover the Trex RainEscape system with deck boards.
• Ensure the troughs and downspouts are dry and clear of debris before applying tape.

How to fix Trex deck fascia warping?

There are only a few things that you need handy to fix warped composite decking, such as:

• Safety goggles
• Power saw
• Screw gun
• Claw bar
• Tape measure
• Replacement composite plank

Can you fix scratches on Trex decking?

The most practical way to repair a scratch in your Trex deck is using a heat gun. It takes patience and isn't guaranteed to be a 100% fix, but we've seen success with minor scratches. Start by grabbing your heat gun and a heat-resistant glove.

How do you remove scuffs from Trex decking?

For minor stains, gently scrubbing it with a soft-bristle brush and some soapy water will often do the job. If the stain persists, you could use stain-removing decking products. You could also try using vinegar and baking soda. However, avoid using abrasive chemicals, such as chlorine-based bleaches and cleaners.

How do you remove scratches from Trex railing?

trex select railing cleaning suggestions Clean® Magic Eraser® to remove these marks. For small scratches on your railing, you can use the Dupli-Color Scratch Seal™ Clear Sealer Pen. Feel free to contact us with any questions about Trex products at (620) 957-4161.

Is there touch up paint for Trex decking?

Trex® Signature™ Aluminum Railing Touch Up Paint - 4.5oz Aerosol Can. Available in White (WH), Black (BK), Platinum (PL) and Bronze (BZ). Bronze color comes in kit of two cans.

How do you get deep scratches out of composite decking?

Here are some methods you can use to fix scratches on your composite deck:Fill nicks and scratches with an epoxy-based filler and a putty knife. ... Try the heat method. ... Replace scratched boards with new ones. ... Consider consulting the manufacturer or retailer about your scratched decking.

How do you get scratches out of a deck?

Pressure-treated decks are the easiest to repair when scratched or gouged. Simply sand out the scratch and re-stain for a finished look. It's important to keep fall leaves and other debris from piling up on your deck, since that can cause mold or algae to grow. A power washer can be used to clean wooden decks.

How do you get scratches out of composite railings?

Mike Guertin Fortunately, scuffs and most scratches in composite rail parts can be buffed out with polishing or rubbing compound and a little elbow grease. I use polishing (also sometimes called 'buffing') compound to take care of light scuffs and blemishes.

Can you resurface Trex decking?

Resurfacing your deck with trex® is easy to do, and the results are easy to love. If the boards on your existing deck are looking a bit worn - and the foundation and deck framing system are sound - you can simply replace the walking surfaces and deck railings with Trex decking and railing.

How do you refresh Trex decking?

You can perform a semiannual cleaning on your composite deck to preserve its longevity.Step 1: Pre-spray your deck. ... Step 2: Spray with soapy water & scrub. ... Step 3: Rinse thoroughly. ... Step 1: Pre-rinse. ... Step 2: Mix up your vinegar solution. ... Step 3: Sprinkle baking soda. ... Step 4: Rinse thoroughly.More items...

Does Trex scratch easily?

The short answer is yes. Trex decking features a hard shell that not only resists scratching but is also formulated to withstand long-term exposure to the elements with less maintenance than wood decking.

What kind of paint do you use on Trex decking?

Trex Deck Paint: Paint for Composite Decking Composite decking requires latex paint with a satin or semi-gloss finish. To paint Trex deck, always start with an acrylic latex primer designed specifically for outdoor use.

What kind of paint can you use on composite decking?

latex paintYes, composite decks can be painted, preferably using latex paint for durability and reduced fading. The higher the quality, the better. Painting a composite deck doesn't affect its longevity, but it does cover any staining or patchy appearance due to sun-bleaching in exposed areas.

How do you get black marks off decking?

Mix 1 cup of bleach into 1 gallon of water. Dip a scrub brush into the solution and spread it over the deck. Let it sit for several minutes before scrubbing up the mold. Rinse the deck when the black spots are gone.

Should composite decking marks?

While your Composite Decking should never need to be stained, sanded, painted, or varnished, thanks to its high-quality low-maintenance exterior. Small scratches and marks may appear on the surface of our Board in areas of high footfall or where furniture has been scraped across the Boards.

How do you remove pencil marks from composite decking?

Remove any excess marks with a soft eraser. Wipe the surface with a cloth or sponge dipped in warm sudsy water. Rinse well with water and wipe dry.

How to get rid of scratches on decking?

Try the heat method. For this, you’ll use a heat gun about 8″ to 12″ away from the scratch. At the same time, you’ll be using a wire brush to scrape the decking in the same direction as this scratch. This works by blending the scratched and non-scratched areas together.

What can scratch a composite deck?

Shoes. Boots, high heels and even some dress shoes can scuff and scratch your composite deck. You’ll notice these scratches more in areas like walkways.

Why Do Scratches Occur?

Over time though, you started to notice that your deck has small scratches in certain areas.

Can composite decking be scratched?

Composite decking is designed to be durable and stand up to any test mother nature can come up with. The reality is that even the best composite decking materials can end up scratched. As your deck ages, you’re more and more likely to see scratches simply from standard wear and tear as well. The good news is that your deck likely isn’t damaged ...

Is composite decking strong?

Composite decking material is very strong and resilient, but issues can arise in some cases. Your decking manufacturer or retailer may be able to recommend a repair method that works well for their unique material formulation. They can also provide cleaning, care and maintenance tips in many cases.

Does composite decking fade?

This is particularly true if you’re using the heat method. With composite decking, a change in seasons may help eliminate your scratch or make it much less visible over time. As your deck ages, the scratch may simply blend in much better with the natural fade of any exterior material.

Do you need to seal a composite deck?

Your composit e de ck won’t ever need to be sealed or painted because it is very durable and made to stand up to regular abuse. Pesky scratches can mar a great outdoor space though. Here are some methods you can use to fix scratches on your composite deck:

Can you replace a board if it has scratches?

Replace boards if the scratches are deep gouges and cannot be brushed or faded out.

Can composite decking be repainted?

Splitting, cracking and rotting boards are never a problem for composite decks. Composite decks never need to be sealed or repainted. However, due to normal wear and tear, scratches can happen on the composite decking.