If for any reason your TV won’t power on or you’re having issues with it freezing, you can try and do a hard reset for your Sharp LCD TV. In many cases a hard reset will fix your issues. Remember this is only for Sharp LCD TVs! Press Volume Up and Channel Up on your TV. While pressing put the power cable back on. Hope this helps you guys.
How do you troubleshoot a sharp TV that loses sound?
Start by running a power cycle reset:
- Unplug the television and wait for a few minutes for the power to drain.
- Plug the TV directly into the wall to rule out a bad power strip.
- Turn the TV back on and check the light.
- If the light continues to blink, run a factory reset to delete stored data and return the TV to its original factory settings.
How to fix a sharp TV?
There are 3 ratings to identify:
- uF (micro farads)
- Temperature
- Voltage
How to reset your sharp LCD TV?
How to Reset a Sharp TV?
- Go to “MENU” > “Setup” > “Reset”.
- Press </> to select “Yes”, and then press OK. “Now, TV will restart automatically, OK?” displays on the screen.
- Press </> to select “Yes”, and then press OK. “Now initialising…” displays on the screen and blinks. ...
How to troubleshoot the sharp Roku TV problems?
- Remove the power cable from the Roku device.
- Remove the batteries from the remote.
- Plug the Roku device back in, and wait for it to finish booting up — you should see the home screen.
- Reinsert the batteries into the remote, but don’t replace the battery cover yet.
What do you do if your Sharp TV won't turn on?
0:191:42How To Fix a Sharp TV that Won't Turn On - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first method is to unplug the tv from the wall. Wait 60 seconds be patient wait the whole 60MoreThe first method is to unplug the tv from the wall. Wait 60 seconds be patient wait the whole 60 seconds. This is a power reset on your tv.
Where is the fuse located on a Sharp TV?
Locate the blown the fuse. It is usually located on the power supply board of the TV, which is the board with the array of capacitors, resistors and heat sinks on it.
Is there a reset button on a Sharp TV?
0:092:303 ways to reset TVs, Sharp TV fix review - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen you want to scroll over to the right. And then go down down down you use your volume andMoreThen you want to scroll over to the right. And then go down down down you use your volume and channel buttons to navigate on the TV. If you don't have the TV remote. And then go down to reset.
What causes TV not to power on?
6 Issues That Cause TV To Not Turn On: TV Remote Control Problem. Infrared Remote Signal Blocked. Power Cord Loose On Back Of TV. TV Not Getting Power – Outlet Issue.
How do I know if my TV fuse is blown?
Depending on the make and model of your TV, use a screwdriver to unscrew the TV fuse cap holder. Then, carefully check the fuse wire. If you can see a visible gap between the wires or a visible metallic or dark smear inside the glass, you have a blown TV fuse.
What happens when a TV fuse blows?
A blown TV fuse wreaks havoc on your system and causes noticeable performance issues. You might experience what's commonly referred to as the Samsung TV black screen of death or another problem that is difficult to diagnose.
How do I hard reset my sharp?
0:000:50How To Reset Your Sharp TV - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress ENTER to access this option scroll down to reset. And then press Enter a pop-up will appearMorePress ENTER to access this option scroll down to reset. And then press Enter a pop-up will appear asking if you would like to reset your TV.
What is a hard reset on a TV?
Applicable Products and Categories of This Article. WARNING! Performing a forced Factory data reset will remove all customized settings in the TV including downloaded apps, systems data, channels, and wireless network settings.
How do I reset my Sharp TV without picture?
Do a Hard Reset. As a last resort, you can perform a hard reset if your TV is not working. To do this, unplug the Sharp TV and then press and hold the power button for 30 seconds. Depending on your TV model, you may also need to press or hold some of the volume buttons, so be sure to check your manual.
What does it mean when your TV won't turn on?
If the television still won't turn on, turn your TV off at the wall and unplug it from the plug socket. Wait 30 seconds, and then plug it back in and switch it on. This is called a 'soft reset' and should recalibrate the TV.
How do I factory reset my Sharp TV?
0:481:56How to Factory Reset Your Sharp TV - YouTubeYouTubeStart of suggested clipEnd of suggested clipGo through these steps. Press the menu button on the remote. Select initial setup select reset thenMoreGo through these steps. Press the menu button on the remote. Select initial setup select reset then it'll want to confirm the reset.
Do TVs have a reset button?
0:210:56How To Run Through A Power Reset On Your TV - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith a TV unplugged locate the power button on the TV. And hold down the power button for 15 secondsMoreWith a TV unplugged locate the power button on the TV. And hold down the power button for 15 seconds. This will drain all of the remaining power from the TV.
How do I change the fuse in my LG TV?
0:222:04Replace Fuse in LG LCD TV - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust take the get rid of the pier. And there was no sign on life. And I check capacitors they lookMoreJust take the get rid of the pier. And there was no sign on life. And I check capacitors they look all right got a fuse here and a fuse I don't reveal can see but right there we may lose a few.
Does a Vizio TV have a fuse?
Locate and visually check all the fuses on the Vizio TV. There are likely five fuses.
Contact Sharp support
If you still can’t get your Sharp TV to turn on, you can try contacting the Sharp support team.
Conclusion
Sharp TV’s can be finicky when it comes to power. If your Sharp TV won’t turn on try these fixes in this order:
What to do if Sharp TV is not working?
When you are faced with a Sharp TV that is not working, the standard troubleshooting methods include performing a hard reset, a firmware update or a factory reset. You can find how to do each of these below.
How to fix Sharp TV?
Many issues with your Sharp TV can be fixed with a firmware update or by resetting the TV. You can also check the TV has power, the TV is well-ventilated, the remote is working, all connections to and from the TV are working and that the settings on your TV and connected devices are correct.
How to reset a TV without a remote?
To reset the TV without a remote, follow the steps below. Step 1: Unplug the TV from the power. Step 2: Hold down both the ‘Channel Down’ button and ‘Input’ button on the TV. Step 3: Continue holding these two buttons as you plug the TV back into the power socket.
Why is my Sharp TV not making sound?
Most of the time, the TV will not have sound because the settings on your device or TV are preventing it . The settings on each device will vary, so you may have to look through the instruction manual. However, for a Sharp TV, you can check the following settings.
Why is my TV not turning on with the remote?
If you are trying to turn the TV on with the remote, it may be that your batteries need replacing or the buttons are stuck. You can test this by using the button on the TV instead. If the TV still turns on using this button, the remote is your issue.
Why does my Sharp TV flash?
The most common cause of a ‘Flashing Sharp TV’ relates to the warning light at the front of the TV flashing. This light will flash when you are operating the TV (pressing buttons), or if the TV has an error.
Why won't my Sharp TV turn on?
Sharp TV Won’t Turn On. If your Sharp TV won’t turn on, this means that it is not receiving power. First try plugging your TV into a different power outlet, or plug it directly into the wall if it was previously plugged into a power board. Sometimes a power board can become overloaded and fail.
Ensure that Sharp TV is getting Power
If your television’s power is turned off or the TV is unplugged, the LED light will not blink at all. If the LED light does not flash when the TV is powered on, there is an issue with your TV’s power supply. The first thing to try is plugging in a different device to make sure you don’t have a power issue.
Issue with TV Remote Batteries
If the LED indicator light blinks on your TV, it means the remote’s battery is low and requires replacement. Replacing the battery should solve the issue. If replacing the battery does not work, the remote’s internal receiver may need to be replaced.
Check the sleep timer
Many people use this mode when watching TV at night so that you can go to sleep peacefully without being disturbed by the background noise. However, this is not a suitable setting for some programs. If the TV keeps turning off during playback, check to see whether the sleep timer is turned on. Please check if the Sleep Timer is set to on.
Reset Internal Power Supply
If your TV isn’t turning on, check the power source first. If you’re using a plug-in style power adapter, be sure it’s connected firmly to the wall outlet. Make sure there are no visible cracks in the adapter or loose connections. If it’s possible, test with another TV that you know works.
Sharp TV Black Screen
If the power indicator is on but all you get is a black screen, there are a few troubleshooting steps you can take.
Sharp TV Remote Not Working
A faulty Sharp TV remote can cause a wide range of issues, from a TV not turning on to the TV being unresponsive when you select a new input or adjust the volume.
Sharp TV No Sound
Once you’ve made sure your remote works properly and tried adjusting the volume on the panel of the TV, there are other troubleshooting steps you can take.
Sharp TV Turns on But No Picture
There are different possible fixes for a Sharp TV that comes on but doesn’t show any images.
Sharp TV Not Connecting to Internet
Are you unable to connect to the internet or keep losing your connection? There are a few Sharp TV troubleshooting steps you can follow.
Sharp TV HDMI Port Not Working
If you’re not getting input from an HDMI source, there are a few things to try.
Sharp TV Audio Output Not Working
Updating the firmware can resolve some issues with audio, but there are other steps to try.
What to do if your TV is not on mute?
If the TV is not on mute, and you have plugged in an external device through the HDMI port, make sure that the device is set to output on the TV.
What to do if your TV is blank?
If the TV is still blank after turning on, consider doing a hard reset.
Why is my screen pixelated?
If you notice screen pixelation or stuttering, this issue usually has to do with the quality of your connection or signal.
What causes a remote control to not work?
The first thing to look at is the remote control. There might be a defective power button that causes the problem.
What bandwidth is best for a TV?
Most modern Wi-Fi routers have two bandwidths. Your TV is best connected to the 5 GHz bandwidth, which is wider and was meant for more intensive applications.
Why is my TV flickering?
Screen flickering is often a hardware issue, wherein there are loose connections inside the TV or in the peripherals connected to it.
Can you fix a remote control?
You can try having it fixed , or you can buy a replacement remote control.
