Repairing Guides

how to repair spare tire hoist

by Vivian Sporer Published 2 years ago Updated 2 years ago
image

Thanks

  • Rotate the hoist shaft counterclockwise until approximately 15 cm (6 in) of cable (1) is exposed.
  • While holding the latch pin (3), fully depress the latch button (2) and release the secondary latch from the hoist assembly. ...
  • Continue rotating the hoist shaft counterclockwise in order to lower the hoist the rest of the way.

More items...

Full Answer

How does a spare tire hoist work on a truck?

In many trucks and vans the spare tire is held in place by a spare tire hoist. You operate a crank and it lowers the spare tire. But many times the spare tire rusts and fails to lower the tire.

Should you buy an aftermarket replacement spare tire hoist?

But many times the spare tire rusts and fails to lower the tire. You can buy a junk yard replacement or a new one from the dealer, but who wants to spend that kind of money on a new dealer part or install another rusty unit? Dorman Products now offers an alternative; you can buy an aftermarket replacement spare tire hoist for a lot less.

How do you get rid of a stuck spare tire?

Soak a stuck spare tire lift with rust penetrant. Tap the T-bar to set up rust-busting vibrations. Most trucks, vans and SUVs stow the spare tire under the vehicle. It's a great space-saving idea, but one that doesn't always work well in the real world.

How do you remove rust from a spare tire lift?

Loosen and lubricate a corroded spare tire lift so you can get to your spare tire when you need it. Soak a stuck spare tire lift with rust penetrant. Tap the T-bar to set up rust-busting vibrations. Most trucks, vans and SUVs stow the spare tire under the vehicle.

image

How tight should a spare tire hoist be?

Fully insert the jack handle into the guide hole and turn the jack handle clockwise until the tire raises to its stowed position underneath your vehicle and is securely seated. The spare tire carrier tightening torque should be 29.50 lb.

What is the part that holds the spare tire?

Spare tires in automobiles are often stored in a spare tire well – a recessed area in the trunk of a vehicle, usually in the center, where the spare tire is stored while not in use. In most cars, the spare tire is secured with a bolt and wing-nut style fastener.

How do you remove a spare tire crank?

1:484:21How to Remove A Spare Tire Without The Tool Kit on a Chevy ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt as we rotate it counterclockwise. It will bring down the wheel. Continuing to lower it till weMoreIt as we rotate it counterclockwise. It will bring down the wheel. Continuing to lower it till we get down far enough to pull the wheel closer to us.

How do you get a spare tire lock off a bumper?

0:564:46Remove & Install Gm & Chevy spare tire door lock cylinder ring - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell those grooves are meant to fit into your bumper hole just like so so you simply squeeze this inMoreWell those grooves are meant to fit into your bumper hole just like so so you simply squeeze this in put it into your bumper hole and release it.

What holds a spare tire under a truck?

Service your “tuck-under” spare tire lift Most trucks, vans and SUVs stow the spare tire under the vehicle. It's a great space-saving idea, but one that doesn't always work well in the real world.

What causes a spare tire stomach?

Fat around the stomach and waist can be caused by a variety of factors. “The spare tire is excess body fat stored around the midsection when our calorie balance is off,” Wilson explains. Caused by an imbalance between calorie intake and output, poor diet and insufficient activity are the main culprits of belly fat.

How does a spare tire lock work?

Like all BOLT Locks, the spare tire lock works with your vehicle ignition key. You simply insert your key into the lock, turn it once and it permanently learn your key.

Should car be in neutral when changing tires?

DON'T leave the car in neutral You'll obviously want to leave the engine off before you start the tyre change, but the gearstick should be left in either first or reverse gear. The reason you want to do this is that the handbrake only operates on two wheels, usually the rear wheels to be exact.

How long can you drive on a spare tire?

50 milesYou should not drive over 50 mph and no more than 50 miles with a donut-type spare tire. Driving for long distances on a spare tire can potentially cause damage to other car parts, including the transmission.

What can you do if you lose your wheel lock key?

Purchase a new key. This is sometimes the easiest option although it can sometimes be expensive. However if you'd like to use the original locking wheel nut set you'll need to buy a new locking wheel nut key. Each key comes with a code so you can order a replacement from the vehicle manufacturer.

Why is there a lock on my bumper?

the lock is for your spare tire. it goes off of your ignition key, and it keeps people from stealing your spare.

How do you get the spare tire off a Ford f150 without the key?

How to Remove a Spare Tire From the Ford F-150 Without the KeyGather Your Tools. ... Park on a Flat Surface and Secure the Truck. ... Secure the Socket to the Lock. ... Crank to Release the Spare Tire. ... Raise the Truck if Needed. ... Clear the Socket. ... Raise the Spare Hoist.

How do you mount a spare tire?

3:416:21Spare Tire Mount Install + Tips on our Open Trailer… - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you have a bolt pattern that doesn't line up. Exactly you can use this to go back and forth.MoreSo if you have a bolt pattern that doesn't line up. Exactly you can use this to go back and forth. All right so we have that mounted up there then we're going to come in the bottom here in the back.

Why is spare tire called Stepney?

The driver simply had to clamp it to the rim of the wheel that had a flat. Davies teamed up with his brother and they were soon in business. They called their invention, the Stepney Spare Wheel, after the location of their workshop in Stepney Street*, Llanelli, Wales.

What happens if you drive too fast on a spare tire?

If someone drives too fast on a spare tire, they could cause the vehicle to fail or blow out and cause damage. Driving fast also makes cars more likely to lose control and hit other vehicles or pedestrians on the road. The risks are even higher with a spare tire than experiencing a blowout on a traditional street tire.

How do you install a spare?

1:182:52How Install a Spare Tire | Safe & Easy Way - YouTubeYouTubeStart of suggested clipEnd of suggested clipContinue lifting until the tire is at maximum one and a quarter inch or three centimeters from theMoreContinue lifting until the tire is at maximum one and a quarter inch or three centimeters from the ground slide the spare tire underneath the car this will help if the car slips from the jack.

How to fix a stuck spare tire lift?

Soak a stuck spare tire lift with rust penetrant. Tap the T-bar to set up rust-busting vibrations.

How to lower spare tire?

Now is the time to get any replacement parts. Start by raising your vehicle and supporting it with jack stands. Try lowering the spare tire.

Ronnie

I fixed the hoist for the spare tire today. Not a bad job got lucky that I didn't have bad rust...

PFCLeist

I was a bit late to fixing my hoist. I was going 50 down a side road when the cable snapped. Luckily noone was behind me, and I didn't even realize it until I looked in the rearview and saw a tire in the middle of the road, figured I would have seen something like that if it was already there, haha. Now I just let it rot in the bed.

teamsmith

I found an excellent write up on instructable for repairing my hoist. I will be doing this very soon.

Minuit

If you're going to go through the effort to take the thing off the truck, might as well fix it right I say.

64 Cheyenne

I did this repair, IMHO if you gonna do it, take it apart and do it right....cable clamps...really? :rotf:

johnj92131

So I still have the correct center piece to hold up my spare. But I "lost" the end on the cable that holds the center piece on the end of the cable. Anyone know what I can used on the end of the cable to hold the center piece???

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9