how to repair ssd hard drive

1. Install and run the SSD repair tool on your PC. Right click the dead SSD and select "Advanced" > "Check Partition".
2. Choose a way to check partition error. Here we choose the first one, which could not only check bad sectors, but also fix them.
3. Then wait checking and repairing process to complete successfully.

Full Answer

How do I recover my SSD drive?

How to Recover Data from Dead SSD?

1. Select The Solid-State Drive. Launch Recoverit Data Recovery on your computer. ...
2. Scan the SSD. After selecting the solid-state drive, and click the " Start " button to start scanning the lost data and files.
3. Perform a Deep Scan. Recoverit software will start to scan the lost data from SSD. ...
4. Preview and Recover Data. ...

How to replace my SSD drive?

you can clone the boot drive to your new SSD by using the free M.2 slot inside the Legion. You can also upgrade the stock SSD and simply reinstall a fresh version of Windows; this is best if the laptop is new and you've yet to store any personal data on ...

How to upgrade your hard drive to SSD?

Physically Swap Your Current Drive with the SSD

1. Turn the computer off and remove the back panel. Turn your laptop off and then disconnect both the power cable and any other connected cables -- including the SSD. ...
2. Look for any screws securing your drive to the laptop. You'll need to unscrew those before you can remove the drive.
3. Lift the old drive up about 30 or 45 degrees and pull it out.

More items...

How to secure erase a SSD drive?

• Enter your system BIOS / UEFI settings
• Look for your drive and select it. You may find it listed on a device index or under a separate tab, but the exact location depends on the configuration of ...
• Look for a Secure Erase or data wipe option. ...
• Perform the Secure Erase or wipe procedure, following any pertinent prompts or instructions that may arise

How do I fix a corrupted SSD?

Some recovery options include:Formatting the drive and redownloading the operating system.Power cycling the SSD. If the SSD drive becomes corrupted through power failure, this method may be the solution. ... Idling in the boot menu. ... Updating SSD firmware. ... Updating drivers.

Why did my SSD suddenly stop working?

A sudden loss of power or rare software events can cause a system to fail to recognize an SSD. In most cases, the SSD can be returned to normal operating condition by completing our power cycle procedure.

How do I rescue a dead SSD?

It's possible to recover data from dead SSD if the SSD died of natural causes (memory cells stopped working). A simple way to recover data from a dead SSD is to simply clone it to a new drive, although you can also connect it to another PC as a secondary device.

Can a failed SSD be repaired?

Back up or restore SSD data to another storage device, then fix the corrupted SSD by formatting, especially when the SSD is write-protected due to file system corruption. When the SSD is a data disk, you can fix it directly after formatting and wiping. If the SSD is a system disk, you can reinstall the system.

How do I know if my SSD is corrupted?

How Do I Know If My SSD Is CorruptedFile on SSD are unreadable. If some files on SSD are unreadable, the data is in a bad block. ... Unable to access, SSD drive runs slowly. ... Check file system. ... The blue screen occurs for many times. ... Unable to write, SSD becomes read-only.

What happens when an SSD dies?

Intel's SSDs are designed so that when they fail, they attempt to fail on the next erase - so you don't lose data. If the drive can't fail on the next erase, it'll fail on the next program - again, so you don't lose existing data.

1. Can SSD drives be recovered?

Due to the technology known as SSD TRIM, data recovery software can not restore data from an SSD drive when files or folders have been deleted. But...

2. How do I know if my SSD is failing?

If you are encountering the following issues, your SSD may be failed: file on SSD are unreadable; unable to access, SSD drive runs slowly; check fi...

3. Can SSD fail?

Although SSD is faster, more stable, and consumes less power than traditional HDD, SSD has a shorter life than HDD with the limited write cycle, so...

4. Can data be recovered from a failed SSD?

Yes. You can use the EaseUS data recovery program to recover data from failed SSD that can be detected by the computer. This application will help...

5. How do I fix a corrupted SSD?

Overall, you have six solutions to fix a corrupted SSD. For instance, update SSD's firmware and drivers, check and fix the file system, rebuild MBR...

6. How do I fix my SSD when it won't show up?

First, you need to < a href=/storage-media-recovery/ssd-not-showing-up-windows-10.html>fix the SSD not showing up matter via changing the drive let...

How to fix SSD not working?

Workaround 1: Update Dead/ Not Working SSD to Fix A Dead SSD 1 Initially, right-click on the “ Start ” icon and select “ Device Manager ” from the left pane. 2 Here, expand “ Disk drives ” and then right-click your SSD, Choose “ Properties ” option 3 Then, opt “ details and Hardware IDs ” under the properties option and click on “ OK “. 4 Afterward, install and start the “ SSD firmware update tool “, check the firmware versions of your SSD on the utility. 5 Now, hit on License option and opt “ Accept ”. 6 Opt updates available and click on “ Update Driver “, confirm the update by selecting “ Yes “. 7 Lastly, select “ OK ” to finish the firmware update procedure. Then you can exit the update utility and check your SSD drive now.

How to connect an SSD to a PC?

If the SSD drive is already in the local machine then, pull the data cable but not the power cable. If you are installing the SSD in a PC or connecting it to a release power supply temporarily, do this instead. Simply, connect the power cable, but no data cable, to the SSD drive. The power cable is the major of the two connectors. Now, turn on the power and leave the power on for a minimum of half an hour.

How to connect a power cable to an SSD?

Simply, connect the power cable, but no data cable, to the SSD drive. The power cable is the major of the two connectors. Now, turn on the power and leave the power on for a minimum of half an hour. After a half-hour, power down and then pull the power cable. Wait 30 seconds, then restore power.

Why are SSDs so popular?

It generates an irritating situation for the user. Nowadays, SSDs are gaining a lot of popularity due to their quick processing rate and instant boot-up abilities. But just like traditional hard drives, they are also prone to multiple types of damages.

Why does my file system need a repair?

In most circumstances, they occur as a result of losing a port connection or because of the development of bad blocks.

Can you write to SSD before it dies?

It is highly recommended to take a backup of your data before the drive gets dead. The SSD Becomes Read-Only: In some situations, the SSD become s read-only. After that, you become unable to write any new data but, you can read the existing data properly. That is another symptom of the drive getting dead.

Common Problems that Occur with SSD

If you find the following problems with your SSD, be aware and take steps to stop the damage.

Solutions to fix a dead SSD drive

If any of the above-mentioned problems irritate you while working on your system try the following methods step by step to cure your SSD drive and Hard Drive Recovery.

Conclusion

If the above-mentioned methods cannot help you to fix your SSD contact your SSD manufacturer for a better solution.

How to restore all data from a corrupted SSD?

Three steps will restore all data from RAW or corrupted SSD/HDD: Run Software > Select and Scan disk data > Preview and Restore data.

What to do if SSD is slow?

If you are using an SSD with slow read/write speeds or your system crashes frequently, you need to use a few tools to check for SSD damage and be prepared to replace your hard drive in time to prevent important data loss.

How to fix SSD not showing up?

First, you need to fix the SSD not showing up matter via changing the drive letter, SSD initialization, reinstall SSD'D driver, etc.. When your SSD shows up, you can use the methods provided in this tutorial to repair corrupted SSD.

How to wipe a SSD?

Launch EaseUS Partition Master, right-click the SSD disk or drive, choose Wipe Data or Format and wait for the process to accomplish.

What is easeus partition master?

EaseUS Partition Master is a top-notch disk and drives management tool that provides comprehensive, effective solutions to help you repair corrupted or damaged SSD by checking file system, rebuilding MBR on SSD, formatting, and erasing SSD.

How to make a bootable disk for SSD?

If your SSD is a GPT disk, this method won't work. Step 1. Create a WinPE bootable disk. Launch EaseUS Partition Master, click "WinPE Creator" on the toolbar. Select to create the bootable disk on a USB drive. If your computer has a CD/DVD drive, you can also create the bootable disk to CD/DVD.

How long does an SSD last?

Although SSD is faster, more stable, and consumes less power than traditional HDD, SSD has a shorter life than HDD with the limited write cycle, so it can fail before their expected life span of five to seven years.

How to repair an SSD?

If you're installing the SSD in a desktop or connecting it to a loose power supply temporarily, repair SSD in this way. Connect the power cable, but no data cable, to the SSD. Turn on the power and leave the power on for 30 minutes. After 30 minutes, power down or pull the power cable.

How to fix a corrupted SSD?

Back up or restore SSD data to another storage device, then fix the corrupted SSD by formatting, especially when the SSD is write-protected due to file system corruption. When the SSD is a data disk, you can fix it directly after formatting and wiping. If the SSD is a system disk, you can reinstall the system.

How to make a bootable disk on a USB?

Launch EaseUS Partition Master, click "WinPE Creator" on the toolbar. Select to create the bootable disk on a USB drive. If your computer has a CD/DVD drive, you can also create the bootable disk to CD/DVD.

What happens if your SSD is damaged?

If the master boot record on SSD is damaged, the SSD will fail to boot and not working. In this case, you can directly use the "Rebuild MBR" feature of EaseUS Partition Master to solve the problem and repair SSD. If the SSD is your system disk and the MBR has damaged, your computer may not start properly.

What to do if your SSD fails to respond?

If your computer warns you that the file system on your SSD disk corrupted or your SSD failed to respond due to some unknown file system error, CMD command or EaseUS free partition manager can fix this error for you.

How to fix SSD not responding?

Fix 2. Update Drivers to Fix Not Responding SSD. Step 1. Click the Start button and type Device Manager, hit Enter to open it up. Step 2. Expand the drive driver category, right-click on each driver, and select "Update driver". Step 3.

What to do if your SSD is not recognized?

If your SSD not detected on the computer, try to plug it into another computer or use another SATA cable/port. If SSD is still not recognized, that indicates physical damage. For a broken SSD, the provided methods on this page won't help. You'll need to take your drive to a local disk repair center for help.