how to repair ssd not detected

Why is my computer not seeing my SSD?

SSD not showing up in BIOS

• Drive not enabled in the BIOS. You need to access BIOS by a specific key and enable it.
• The Serial ATA motherboard drivers do not load properly. You need to update the storage controller for your computer.
• The data cable is faulty or unplugged. You are supposed to replace it.

Why is my SSD not showing Windows 10?

To fix SSD not showing up in bios windows 10/11, configure the SSD settings in BIOS as follows:

1. Restart your computer.
2. Press the F2 key.
3. Press the Enter key.
4. Select Serial ATA.
5. Press Enter.
6. Save your changes to SATA Controller Mode Option.
7. Restart your computer to enter BIOS.

How to get windows to recognize new SSD?

To get BIOS to detect the SSD, you need to configure the SSD settings in BIOS as follows:

• Restart your computer, and press the F2 key after the first screen.
• Press the Enter key to enter Config.
• Select Serial ATA and press Enter.
• Then you'll see the SATA Controller Mode Option.
• Save your changes and restart your computer to enter BIOS.

How to make PC recognize SSD?

To assign the SSD a new drive letter, follow these steps:

1. Right-click on "This PC", select "Manage". Under the Storage section, click "Disk Management".
2. Right-click on the SSD partition and select "Change Drive Letter and Paths…".
3. Among Add, Change, and Remove, click the "Change" button, and then select a drive letter from the list. Click "OK" to confirm.

Can a failed SSD be repaired?

Unplug your SATA cable from the SSD but leave the power cable connected. Plug the PC power cable back in -> turn it on -> enter BIOS. Let your PC sit idly in BIOS for 30 minutes -> turn off your PC. Plug the SATA cable back into your SSD and boot your PC into BIOS again.

How do I fix a corrupted SSD?

First, click "Start" button, type "Device Manager" in the "Search" box, hit "Enter" to open it up. Second, Expand the "Disk Drives" category, right-click on SSD driver and select "Update driver". Then reboot your computer when the process is finished.

What if my SSD isnt showing up?

Sometimes, your SSD not showing up is because the drive letter of the SSD is missing or conflicting with another disk, and the Windows OS is unable to recognize it. You can solve this problem by manually assigning the SSD a new drive letter in Windows Disk Management.

Can SSD fail suddenly?

In this article, we'll look why a perfectly healthy SSD drive with 98-99% remaining life can die a sudden death. We'll also give recommendations on tools and approaches that can get the data back even if the SSD drive is corrupted or does not appear in the system.

What can cause SSD failure?

5 Most Common Causes for Solid State Drive FailuresPhysical Faults with Drive Components. ... Data Corruption within Solid State Drive. ... Drive Damage from Water or Heavy Blow. ... Short Circuits in Solid State Drive. ... Drive Firmware Upgrade Failure.

How do I enable my SSD?

In Windows 8 and later, move the mouse to the lower left corner of your desktop and right-click on the Start icon, then select Disk Management. When Disk Management opens, a pop-up will appear and prompt you to initialize the SSD.

Does SSD need power?

Among the popular SSD types, only the SATA 2.5″ SSD needs to be powered separately. The rest of the drives do not need to be powered separately. Essentially, all SSDs require power.

Do I need to change BIOS settings for SSD?

For ordinary, SATA SSD, that's all you need to do in BIOS. Just one advice not tied to SSDs only. Leave SSD as first BOOT device, just change to CD using fast BOOT choice (check your MB manual which F button is for that) so you don't have to enter BIOS again after first part of windows installation and first reboot.

How do SSD get corrupted?

If your SSD has bad blocks or even an issue with its connector port, the result may be corruption of files. Most computers come loaded with software to address corrupt files. This repair software is usually quite good, and in many cases, you'll be prompted to run a repair before you even detect an issue.

How does SSD drive get corrupted?

How Do SSD's Get Corrupted?SSDs rely on their capacitors to work. ... A power failure may lead to data corruption if not drive corruption.SSDs have a limited number of reading or writing cycles, which is common in these kinds of storage devices. ... Hardware corruption may also be caused by malware or virus attacks.

Can SSD be recovered?

Can SSD data be recovered? Yes, SSD data can be recovered—even from SSDs that have the TRIM command enabled, in many cases. The key is to begin the data recovery process as soon as possible using the best SSD recovery software application available.

Why is my SSD not showing up?

Driver issues are one of the major reasons. Just like a hard drive, most times the SSD is detected but not showing up in My Computer because the di...

How do I get my new SSD to show up?

If you get a new SSD and it won't show up in the Windows Disk Management, it's likely in the uninitialized state. You must initialize a disk before...

How do I fix SSD not detected in BIOS?

To make BIOS detect the SSD, you need to configure the SSD settings in BIOS as follows.Restart your computer, and press the F2 key after the first...

What to do if your SSD is not recognized?

If your SSD not detected on the computer, try to plug it into another computer or use another SATA cable/port. If SSD is still not recognized, that indicates physical damage. For a broken SSD, the provided methods on this page won't help. You'll need to take your drive to a local disk repair center for help.

How to repair an SSD?

If you're installing the SSD in a desktop or connecting it to a loose power supply temporarily, repair SSD in this way. Connect the power cable, but no data cable, to the SSD. Turn on the power and leave the power on for 30 minutes. After 30 minutes, power down or pull the power cable.

How to make a bootable disk on a USB?

Launch EaseUS Partition Master, click "WinPE Creator" on the toolbar. Select to create the bootable disk on a USB drive. If your computer has a CD/DVD drive, you can also create the bootable disk to CD/DVD.

What happens if your SSD is damaged?

If the master boot record on SSD is damaged, the SSD will fail to boot and not working. In this case, you can directly use the "Rebuild MBR" feature of EaseUS Partition Master to solve the problem and repair SSD. If the SSD is your system disk and the MBR has damaged, your computer may not start properly.

What to do if your SSD fails to respond?

If your computer warns you that the file system on your SSD disk corrupted or your SSD failed to respond due to some unknown file system error, CMD command or EaseUS free partition manager can fix this error for you.

How to fix SSD not responding?

Fix 2. Update Drivers to Fix Not Responding SSD. Step 1. Click the Start button and type Device Manager, hit Enter to open it up. Step 2. Expand the drive driver category, right-click on each driver, and select "Update driver". Step 3.

How long does it take for an SSD to come back to life?

After 30 minutes, power down or pull the power cable. Wait 30 seconds, then restore power. Let the drive sit powered on for another 30 minutes. Power down again, then wait 30 seconds. If all goes well, the SSD drive will come back to life when you connect the data cable or plug the drive back into a laptop. Fix 5.

How to check if my SSD is working?

To get BIOS to detect the SSD, you need to configure the SSD settings in BIOS as follows: 1 Restart your computer, and press the F2 key after the first screen. 2 Press the Enter key to enter Config. 3 Select Serial ATA and press Enter. 4 Then you'll see the SATA Controller Mode Option. 5 Save your changes and restart your computer to enter BIOS.

Why is my SSD not showing up?

SSD Not Showing Up Because the Drive Letter is Missing or Conflicting. Sometimes, your SSD not showing up is because the drive letter of the SSD is missing or conflicting with another disk , and the Windows OS is unable to recognize it.

What is the best data recovery software?

EaseUS Data Recovery W izard Pro has a reputation as one of the best data recovery software programs on the market. It comes with a selection of advanced features, including partition recovery, formatted drive restoration, and corrupted file repair.

How to scan SSD drive?

On EaseUS Data Recovery Wizard, select the drive marked as SSD where you lost data, and click the "Scan" button.

What is easeus data recovery wizard?

EaseUS Data Recovery Wizard: to recover lost data from inaccessible and formatted hard drives/partitions.

Why won't my SSD show up in Windows?

If you get a new SSD and it won't show up in Windows Disk Management, it's likely in an uninitialized state . You must initialize a disk before the Logical Disk Manager can access it.

How to initialize SSD in Windows 10?

Otherwise, you will need to initialize the SSD in Windows 10. To initialize an SSD, follow these steps: Step 1: Open Disk Management on your computer. Step 2: Find and right-click the SSD you want to initialize, and then click "Initialize Disk".

Why is my SSD not showing up?

SSD drive not showing up because of disk driver issue. If your problem is caused by disk driver issue, you can use Hardware and Device Troubleshooter to fix driver issue or directly uninstall it in Device Manager.

Why isn't my SSD showing up on Windows 10?

The driver issue can be one of the reasons for SSD drive not showing up in Windows 10. You can try Hardware and Device Troubleshooter in Windows 10 or you can directly uninstall the driver in Device Manager.

How to initialize SSD in Windows 10?

If the new SSD is not showing up in Windows 10, you need to initialize it. You can type diskpart > list disk > select disk n (n refers to the disk number of the new SSD) > attributes disk clear readonly> online disk > convert mbr (or convert gpt)in the command prompt and hit Enter to run it.

How to get SSD to show up in Windows 10?

Step 1. Press Win + R to summon the Run window, type devmgmt.msc in the box and hit OK to go to device manager. Step 2. In Device manager, go to Universal serial bus controllers, right-click the SSD and then click Uninstall. Step 3.

What is SSD infected with?

8. SSD is infected by virus or malware.

What does select disk n mean?

select disk n (n refers to the number of the disk containing unsupported or corrupted file system)

Can SSD drive be recognized?

3. The file system of SSD drive cannot be recognized.

Why SSD Is Not Recognized?

Since it's already been established that SSDs can fall victim to errors, the obvious step to take is to determine what those errors are. Don't worry about fixing them for now. That will be delved into a little later. Know the errors so you can identify them when you see them, alright?

Why is my SSD not assigning a drive letter?

The error is mostly caused by file system issues or even with the SSD itself. Another simple way out of this issue is to assign a drive letter yourself using "Disk Management."

How to connect SSD to PC?

Step 1: Choose a Location 1 Connect the SSD to your PC and start Recoverit, then choose the SSD from the list of drives you see on the PC. 2 If you don't know which of them is your SSD, just look under the "External Devices" category. It should be there. Check your SSD's size to be sure you chose the right drive. Click on "Start."

Why is my SSD slow?

Even though SSDs were built to be strong, filling them up with files can eventually slow them down because they will be harboring half-filled blocks; such blocks are slower to write than empty blocks. Here's a little tip: Try not to fill up more than 75% of your SSD or you'll be trading performance for capacity.

How to change the drive letter on an SSD?

1. Go to "This PC" and right-click on it, then choose "Manage". In the "Storage" menu, select "Disk Management.". 2. You will see all the SSD partitions. Go over them and pick out the one without a drive letter. Right-click on it and choose "Change Drive Letter and Paths.". 3.

How to update my Windows 10 driver?

1. Press the "Windows" key and type "Device Manager" in the start-up menu's search field. Click on it or hit "Enter" to launch it. 2. Go to the "Disk drives" category and expand on it, then right-click on every item under it and click on "Update driver.". Once the update is through, reboot your PC.

What to do if playback doesn't begin?

If playback doesn't begin shortly, try restarting your device.

What to do if M.2 SSD is not showing up?

If the M.2 SSD is not showing up in disk management, you can update your driver, apply Hardware and Device Troubleshooter and assign a drive letter by this in-depth guide.

How to find lost data on SSD?

Step 1. Scan the SSD. On EaseUS Data Recovery Wizard, select the drive marked as SSD where you lost data, and click the "Scan" button. Step 2. View the results. When the scanning finishes, find lost SSD data by using the "Filter" and "Search" options. Step 3.

What is the best data recovery software?

EaseUS Data Recovery W izard Pro has a reputation as one of the best data recovery software programs on the market. It comes with a selection of advanced features, including partition recovery, formatted drive restoration, and corrupted file repair.

What is easeus data recovery?

EaseUS Data Recovery Wizard is a powerful system recovery software, designed to enable you to recover files you’ve deleted accidentally, potentially lost to malware or an entire hard drive partition.

How to fix BIOS issue?

We advise you to use solution 1 first. Solution 2 involves disassembling the computer and reinstalling the hard disk, which may be hard if you are a beginner.

Is easeus a good recovery tool?

EaseUS Data Recovery Wizard is the best we've seen. It's far from perfect, partly because today's advanced disk technology makes data-recovery more difficult than it was with the simpler technology of the past.

How to fix corrupted SSD drive?

Migrating the data to another disk, and then doing a full format is another effective to fix corrupted SSD drive, especially when the SSD is write-protected due to file system corruption. Step 1. Run AOMEI Partition Assistant. Click any partition of the SSD and select "Format Partition" on the left side bar. Step 2.

How to fix corrupted SSD drive on Windows computer?

If you are being irritated by any one of the symptoms listed above, you can try the following 3 regular ways before applying a professional SSD repair tool.

How to fix SSD bad sectors?

Step 1. Install and run the SSD repair tool on your PC. Right click the dead SSD and select "Advanced" > "Check Partition". Step 2.

How to update my SSD driver?

First, click "Start" button, type "Device Manager" in the "Search" box, hit "Enter" to open it up. Second, Expand the "Disk Drives" category, right-click on SSD driver and select "Update driver". Then reboot your computer when the process is finished.

Why is my SSD read only?

If you suddenly find that your SSD is in read only mode and refuses any write operations, but you have not manually set the disk to read only, it is probably because the SSD is corrupted. Symptom 5. SSD drive runs slow. When you find the your SSD is slowing down, it probably gets damaged.

Why is my SSD booting BCD?

If you get Boot BCD error on Windows as shown below, it could be a sign of a bad block or interface problem with SSD . For such issues, different operating systems will proactively prompt you to use the built-in file system repair tool. You can have a try.

What does it mean when a file cannot be read?

Symptom 1. Some data files cannot be read. When you find a file in the system cannot be read, the system probably has detected the data is in bad blocks on SSD drive. Then you are not allowed to read anything from the SSD. Symptom 2. The file system needs to be fixed.

What to do if your SSD is bad?

If your SSD has errors or bad sectors, you can run CHKDSK (Check Disk) to find and resolve them. You don’t need to install any third-party software solutions since you can launch CHKDSK from the command-line environment.

How to fix SSD not showing up on Windows 10?

1. Enable the SSD in BIOS. Start by making sure your SSD is enabled in BIOS. Here’s what you need to do:

Why is my new SSD not showing up?

There could be various reasons why your SSD doesn’t detected by Windows 10, such as:

Why won't my SSD show up on my computer?

If your operating system is infected with malware, your SSD might not show up on your computer. But you can run a malware scan and remove or quarantine any damaged files by turning to Windows Defender.

What does it mean when you get an error when trying to access the SSD contents in your file explorer?

Keep in mind that it means losing all files you saved there.

Why is it important to detach external devices from SSD?

If you have multiple external devices connected to your computer, like a Wi-Fi adapter or a webcam, it’s a good idea to detach them. They might clash with your SSD, prevent you from using it, and making you believe that the SSD is malfunctioning.

Why is my SSD not connecting to Windows 10?

If your storage controller drivers are obsolete, your SSD will not properly connect and will remain undetected by Windows 10. But you can fix the problem by updating those drivers.