how to repair stairs after carpet removal

Instructions

• Remove the carpet from the stairs.
• Using a varnish stripper, remove the top coat from the stair treads.
• Fill in any holes in the wood with wood filler.
• Sand the wood using multiple grit sandpaper.
• Stain the wood treads.
• Paint the stair risers.

Full Answer

How to install hardwood on stairs after carpet?

Replacing Carpet on Stairs With Hardwood

1. Remove the Carpet. First, prep the stairs by removing the carpet with a utility knife and pry bar. ...
2. Remove Staples, Nails or Tack Strips
3. Cut Existing Nosing
4. Measure the Stairs
5. Cut Riser Pieces
6. Cut Tread Caps
7. Attach Edge Moulding
8. Measure the Tread Size
9. Stain Your Stairs

What to do with stairs after carpet is removed?

What to put on stairs after removing carpet?

1. REMOVE THE CARPET FROM THE STAIR. Before anything can change, you must remove the old carpet.
2. REMOVE THE PAINT FROM THE WOODEN STAIRS.
3. FILL ALL HOLES WITH THE WOOD.
4. MOW THE STAIRS.
5. PAINT THE STAIRS.
6. COLOR AGAINST the stairs.

How to redo stairs that had carpet?

Supplies needed to refinishing stairs

• tinted stain (We will get to what I used in a bit but if you want to use something different than me then you could use this one HERE)
• Minwax Polyurethane for Floors Clear Satin Oil-Based Polyurethane
• brush made for oil-based paints and stains ( HERE)
• small roller, handle and tray (I love these HERE and this Roller HERE)

More items...

How to fix stairs that creak without lifting the carpet?

Instructions

• Locate the Source of the Squeak. Identify squeak hot spots by having an assistant slowly walk up and down the stairs as you try to locate the squeaks.
• Remove the Runners and Obstructions. If you have a runner on the stairs, remove it. ...
• Pull Loose Nails. Remove any visible loose nails. ...
• Drill Next to the Hole. ...
• Drill New Screw. ...

What to do after removing carpet from stairs?

Hardwood Stairs Refinishing ProcessRemove any carpeting from the stairs.Remove all carpet staples.Strip the stain from the treads.Sand the treads and risers using an orbital hand sander.Hand sand the spindles, banister and around the base of the spindles.Vacuum and wipe down everything until the dust is gone entirely.More items...

How do you install stair treads after removing carpet?

1:282:39How To Convert Carpeted Stairs to Hardwood | Beyond The BasicsYouTubeStart of suggested clipEnd of suggested clipThe other option is to replace the tread piece entirely with a hardwood border if you're doing thatMoreThe other option is to replace the tread piece entirely with a hardwood border if you're doing that you're going to measure the tread size and then cut your tread. And attach.

How do you refinish stairs from carpet to wood?

Replacing Carpet on Stairs With HardwoodStep 1: Remove the Carpet. ... Step 2: Remove Staples, Nails or Tack Strips. ... Step 3: Cut Existing Nosing. ... Step 4: Measure the Stairs. ... Step 5: Cut Riser Pieces. ... Step 6: Cut Tread Caps. ... Step 7: Attach Edge Moulding. ... Step 8: Measure the Tread Size.More items...

How do you repair an existing staircase?

0:201:42Stairs repairs - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply construction wood adhesive on each stair and install the new stair over the old. One. Stand onMoreApply construction wood adhesive on each stair and install the new stair over the old. One. Stand on the newly installed stair to ensure good bond with the old one.

How can I redo my stairs cheap?

0:1310:20DIY Stairs Makeover for Under $200 with Full Cost Breakdown!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I start off by eliminating the connection between the drywall and stairs by adding a 1-inch pieceMoreSo I start off by eliminating the connection between the drywall and stairs by adding a 1-inch piece of trim to the top of the stringer.

Is there an alternative to stair carpet?

Laminate flooring is among one of the most popular alternatives to carpet on stairs for many reasons. Laminate floors are notably less expensive than other carpet alternatives and offer a brilliantly affordable alternative to expensive carpeting.

How much does it cost to change stairs to wood?

Hardwood stairs cost about $75 to $200 per stair, including labor and materials, and most homes have 10 to 20 stairs. Costs can range from $750 to over $30,000, depending on the type of wood, number and shape of stairs, and any structural work that needs done.

How do you restore wood stairs?

Steps to Refinishing Your Stair Treads:Sand. Start by sanding down the treads to bare wood with the 80 grit sandpaper. ... Clean. Vacuum between passes, then wipe down the treads with a tack cloth. ... Sand again. ... Clean again. ... Treat the wood. ... Stain the treads. ... Apply the Finish. ... Sand, then repeat two more times.

Are hardwood stairs worth it?

While wood flooring on your stairs can provide a sleek and modern feel to your home, they can also be dangerous. Wood stairs can be slippery, and there's not much cushion if a fall were to happen. If you have children, seniors or sleepwalkers in your home, wood stairs may not be the best choice in terms of safety.

How do you fill gaps in stairs?

To caulk the gap between your stairs and wall, follow these steps. What is this?...Caulk the GapPrep the Gap. First, remove all dirt, grime, and old caulk from the gap. ... Tape Around the Gap. ... Insert Backer Rod as Needed. ... Prep the Caulk Tube. ... Apply the Caulk. ... Finish the Caulk. ... Clean off Excess Caulk. ... Allow the Caulk to Dry.More items...•

How do you update stairs?

1:2919:06Amazing Staircase Makeover...Updating After 30 Years!YouTubeStart of suggested clipEnd of suggested clipSo everything for this staircase was new but we did preserve our original hand railings and whatMoreSo everything for this staircase was new but we did preserve our original hand railings and what they did was they sanded them down and stained them to match our wooden floors.

How much does it cost to replace stair treads?

Homeowners pay between $400 and $1,500 for the replacement of stair treads and risers for a standard set of 12. Costs may be higher or lower, based on the materials involved.

How do you install treads on non slip stairs?

0:053:55How to Install Rubber Stair Treads - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo do this after we have our mark and cut our tape just simply pull the tread any distance from theMoreTo do this after we have our mark and cut our tape just simply pull the tread any distance from the edge that you're scribing to get it in place.

How do you secure stair treads?

4:108:24Installing Prefinished Stair Treads - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe apply a bead of construction adhesive like liquid nails to the back of the riser.MoreWe apply a bead of construction adhesive like liquid nails to the back of the riser.

How do you install stair treads?

0:006:07How To Install Prefinished RetroFit Stair Treads from Stair-Treads.comYouTubeStart of suggested clipEnd of suggested clipCheck to make sure there are no exposed staples or nails on the sub. Treads remove any nails orMoreCheck to make sure there are no exposed staples or nails on the sub. Treads remove any nails or hammer any exposed staples to ensure you have a nice clean surface to install your new retro.

Do you need carpet tape for stair treads?

Stair treads must be attached to the stairs to be safe and effective. Don't simply place the treads on the steps without any form of adhesive or staple. You can use carpet tacks on hardwood or laminate stairs instead of carpet tape, but the tacks leave small holes in the floor.

How much does it cost to refinish stairs with wood treads?

The cost of refinishing stairs that have wood treads under the carpet will be about $130 for all the materials.

How do I remove varnish from stairs?

First, make sure you are wearing plastic gloves and a mask. Then start painting your varnish remover on the stairs with the paint brush. TIP: Make sure you apply a generous amount. I did not and had to reapply the remover.

How do I clean a stairwell with an electric sander?

After you have sanded with the sander, move to the block sanders. Start with the medium block and sand all the corners that your electric sander could not get. Then move to the fine block and do the same thing. The stairs should now be very smooth and ready to be cleaned.

Do you need to remove carpet pad after it's been removed?

Remember you don’t want it anyways. Once the carpet is removed, you will need to remove the pad the same way. But the pad will probably have staples holding it in place. When the carpet and pad have been removed, its time to remove the staples and tack strip.

Can you paint a stained stair riser?

Now that the stain is applied you can paint the stair risers. But first you will need to tape off all areas of the stained stairs, you can also cover the stair with paper.