how to repair synthetic rattan furniture

1. Cut away any broken rattan strands. Take a close look at your rattan furniture and pinpoint where the broken or damaged strands are.
2. Measure and cut a new replacement strand for your furniture. Place the new rattan strand next to the rattan strand that you just cut out and removed.
3. Soak the replacement rattan strands in water for 30 minutes. Fill a large bowl with water and submerge your rattan strands.
4. Apply a dot of super glue along 1 end of the rattan strand. Spread the glue along the bottom end of the material, so it will hold in place.
Press the glued end of the rattan strand in place for 5 minutes. Find the trimmed end of rattan, where you cut away the damaged section of material.
Weave the rest of the new strand into your furniture. ...
Cut off any excess material at the end of the weave. Pull on the replacement rattan strand so it’s completely taut.
Apply a dot of glue and tuck the strand beneath the neighboring rattan material. Squeeze a dot of super glue onto the other end of the new strand.
Wait 30 minutes for the glue to harden before using the furniture. ...

Full Answer

How do you fix rattan furniture that has ripped?

Clean the furniture to ensure dust and dirt does not get into the weave as you repair it. Apply small amounts of glue to pieces of rattan that are poking out and tuck them back under the weave. Repeat step 2, allowing for 30 minutes to let the glue dry. Glue the wrappings around the feet if they are loose.

How do you replace a strand of rattan?

Attach a replacement strand by weaving it into the furniture and securing it with glue. Add a layer of varnish to the set for extra protection. Rattan furniture is popularly used in sunrooms, conservatories and as outdoor furniture. Lightweight and attractive, it’s excellent for use in summer and can last for years.

How to clean rattan garden tables and chairs?

Similarly, the first step is to clean your rattan garden tables and chairs and remove dust on the surface. Apply a hairdryer to gently heat your rattan furniture set to help soften the weaves of the worn parts. Use sandpaper to polish the rattan until it is bright again.

What is the difference between Rattan and synthetic garden furniture?

Rattan furniture is a more popular topic as the furniture has become a modern staple in any garden, and the synthetic (or plastic wicker or resin) variety favoured by most comes with quite a few misconceptions and information gaps.

How to Repair Rattan Furniture in a Few Easy Steps?

How to soften rattan furniture?

Why do my outdoor chairs shake?

Why add more cushions to rattan outdoor furniture?

How to clean a rattan sofa?

Can rattan furniture break?

Can you repair a rattan garden set?

See more

Can plastic rattan be repaired?

Although plastic wicker rattan is weather-resistant, the strips can get frayed or cut. You can repair the furniture by replacing the plastic rattan weave on your own with the right tools.

How do you fix plastic rattan on outdoor furniture?

How to Fix Faux Wicker Patio FurnitureClean the Faux Wicker Patio Furniture. ... Remove Broken and Frayed Ends. ... Cut a New Resin Strip to Fit. ... Apply a Quick-Set or Non-Quick-Set Epoxy. ... Weave the Strip Into Place. ... Glue the Ends Together Before Trimming. ... Touch Up the Section as Necessary.

How do you maintain a synthetic rattan?

It requires very little cleaning; just wash down with warm soapy water each year and rinse off with the garden hose on a fan spray setting. If there is dirt lodged in the weave just brush gently with an old toothbrush. Don't use abrasive scourers as this will only scratch the weave.

Can rattan furniture be repaired?

Not to worry—both wooden and synthetic rattan are easy to repair, and both can be fixed in the same way. If your furniture only has a few loose ends or wrappings, refer to the first method in this guide. If some sections of your furniture need a little extra TLC, skip ahead to the second method.

What is synthetic wicker material?

Synthetic outdoor wicker is a fiber made from resins and extruded to resemble natural fibers and materials. It is built to be completely weather and solar resistant so the outdoor furniture lasts longer and looks the same as when new.

How do you paint plastic rattan furniture?

How to Paint Plastic Wicker FurnitureSTEP 1: PREP. I hate prep work, which is one of the reasons I love using Krylon® Fusion All-in-One™. ... STEP 2: SPRAY PAINT YOUR FIRST COLOR. ... STEP 3: SPRAY PAINT YOUR WICKER CHAIRS WITH YOUR SECOND COLOR. ... STEP 3: ENJOY!

How do you keep synthetic rattan furniture from splitting?

Place rubber stoppers underneath the legs of the furniture. Keeping a bit of rubber between the wood and the floor will prevent unnecessary damage and splitting of the rattan.

Can you leave synthetic rattan furniture outside?

yes. With top quality synthetic rattan, it is perfectly safe to keep your furniture outside all year round.

Why is my rattan furniture splitting?

Long-term exposure of natural rattan to sunny weather may result in splitting and cracking of the furniture.

What's the difference between rattan and wicker?

“The difference is that rattan is a material, whereas wicker is the style and method of weaving,” Zoe explains. “Wicker can be woven from rattan as well as many other natural or synthetic materials, which is where the confusion often lies.”

How do you fix a hole in a rattan chair?

How to Repair a Rattan ChairSand the Weave. Sand the sides of the rattan at the points where it will be reattached, using 200-grit sandpaper. ... Apply Wood Glue. ... Join the Pieces Together. ... Removed the Damaged Weave. ... Soak the New Weave in Water. ... Interlace the Weaves. ... Glue the Weaves Into Place. ... Trim Off Excess Pieces.

How do you restore outdoor plastic furniture?

RESTORE FADED PLASTIC FURNITURE First step is to clean any debris, cobwebs or general muck from the plastic furniture's surface. Secondly, use a suitable plastic restorer and spray it onto the plastic furniture, rubbing it in with a clean, dry cloth. You will find this restores the faded plastic back to new!

How do you glue rattan?

Apply Wood Glue Spread wood glue onto the places where the rattan pieces or strands will be attached, instructs Rattan Yard. Separate any twists. Feed the glue between the weaves. Cover all the strands that have been detached.

How do you fix a broken plastic chair?

0:284:53How to Fix broken plastic chair in 4 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first things first is to apply hot glue like you saw i just did so and attach it to you know backMoreSo first things first is to apply hot glue like you saw i just did so and attach it to you know back to the base of the chair. So i just apply the hot glue around the surface.

How do you keep resin wicker from cracking?

Apply a safe, non-toxic sealer to protect against cracks, chalkiness or fading. Cover or store in a dry place when not in use for extended periods of time.

How do you Reweave a patio chair?

4:1512:41How to Upcycle a Patio Chair with Paracord. - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnder. So go around the bottom. And then bring it around back to the front on the top bar. And thenMoreUnder. So go around the bottom. And then bring it around back to the front on the top bar. And then before we head back the other direction we just want to wrap. It.

How to repair rattan?

Fill a large bowl with water and submerge your rattan strands. Set a timer for 30 minutes— this makes the rattan material nice and flexible, and makes it a lot easier to work with during your repairs. Before continuing with the repairs, blot away any excess water from the rattan material.

How to clean rattan furniture?

Wipe down real, wooden rattan furniture with dish soap and water. Stir 1⁄4 c (59 mL) of dishwashing soap with 1 US gal (3.8 L) of water. Then, dip a soft rag into the sudsy mixture and wipe down the entire surface of the furniture. Clean any hard-to-reach crevices with a toothbrush.

How to repair a broken rattan strand?

1. Cut away any broken rattan strands. Take a close look at your rattan furniture and pinpoint where the broken or damaged strands are. Then, grab a pair of pliers or scissors and make 2 cuts—1 on either end of the damaged rattan strand.

How to keep rattan furniture in place?

Rattan furniture stays in place via tight “wrappings” along the edges of the furniture. If one of these wrappings gets loose, it could through the whole weave pattern out of whack. Pull these loose sections taut and wrap them back around the side of your furniture. Then, secure them in place with super glue.

How to secure rattan ends?

Secure any loose ends back into place with super glue. After a lot of use and time outside, rattan ends can look a little worse for wear. Not to worry—simply squeeze a dot of super glue along each end, and tuck them back into the weaving. Then, wait for the glue to dry and seal before using the furniture again.

How long does it take to glue rattan?

Press the glued end of the rattan strand in place for 5 minutes. Find the trimmed end of rattan, where you cut away the damaged section of material. Press the glued section of rattan on top of this section, letting the glue dry and harden for 5 minutes.

How to get rid of holes in rattan?

Tighten loose rattan pieces with a screwdriver to get rid of holes. Sometimes, loose rattan weaving looks warped, creating “holes” in your furniture. Locate the specific strands of rattan material that look loose and warped. Then, slide the end of a flathead screwdriver beneath the end of the strand.

How to get rattan back under weave?

Apply small amounts of glue to pieces of rattan that are poking out and tuck them back under the weave.

How to make a rattan tee?

Apply small amounts of glue to pieces of rattan that are poking out and tuck them back under the weave. Repeat step 2 , allowing for 30 minutes to let the glue dry. Glue the wrappings around the feet if they are loose. If parts of the weave can't be replaced then cut off the weave. Attach a replacement strand by weaving it into ...

What happens if wicker is loose?

If the wrappings come loose, the rest of the weaving can come undone and unravel, leaving you with an ugly piece of furniture and extra repair work. Glue any loose wrappings back into place. Some sections of wicker might be too damaged to stick back in place simply.

How to fix loose ends in a woven fabric?

If you find loose ends poking out, these can be fixed easily by directly applying a small amount of glue and tucking them back into the weaving. Repeat this with any loose ends and allow the glue to dry for 30 minutes before continuing.

What happens if parts of the weave can't be replaced?

If parts of the weave can't be replaced then cut off the weave.

Can you use varnish on furniture?

You can also use varnish if you want to give the entire piece a refresh. It’s best to repair the furniture outside, so make sure you choose a day with beautiful weather, and not too strong wind. Cover the surface you’re working on to avoid spilling any varnish or glue – use newspaper or an old sheet.

Can you varnish rattan furniture?

Once you repair your furniture, you can also choose to apply a layer of var nish. Not only will this hold the rattan in place, but it will also add a layer of protection against the elements to ensure the furniture lasts longer.

Broken strands of synthetic rattan garden furniture can easily be repaired

The strands of good quality polyethylene rattan outdoor garden furniture should not break easily, but cheaper sets are not made from good quality weave so can snap quite easily, especially if left out in a hard winter.

Also in our Blog

Make the change and join the Hayes family Hayes Garden World has been in the same family since it…

How long should I soak a rattan coil?

Once your rattan is purchased, soak the coil in water for 20 minutes. If you omit this step your rattan will be very stiff, brittle, and difficult to work with. I used a large bowl of water and kept it nearby while working with the rattan to prevent it from drying out.

What to use for a cane that is fragile?

For thinner, more fragile cane I would recommend a soft toothbrush.

Can you stop rattan?

You can stop here if you love the look of the natural rattan.

How to fix scratches on rattan?

Scratches on synthetic rattan strands can be fixed using epoxy resin and paint. Simply fill the scratch with resin, leave to dry for 24 hours in a ventilated area , then paint to match with the surrounding rattan.

What is rattan furniture made of?

While garden furniture can be made from various different things, the hand woven rattan that we supply has been made with: 1 A strong aluminium frame 2 UV stabilized synthetic rattan weave

Do I need to cover my rattan furniture during the winter?

The furniture itself does not require a cover. It’s designed to survive the snow and icy conditions of the winter months. Again we advise storing the cushions at all times when not in use.

Do I need to cover or protect the feet of my rattan furniture?

If you would like to avoid this then you may cover them with a more durable material or coating.

Is it possible to repair any broken strands of synthetic rattan?

To repair your rattan strand, simply cover the break in the rattan with epoxy resin, forming it with a sculpting tool to look similar to the surrounding rattan edges. Leave it to set and harden for at least 24 hours, and do so in a well ventilated area. You may have to paint the surrounding area to blend in the fix perfectly.

Can I repair scratches on synthetic rattan furniture?

Scratches on synthetic rattan strands can be fixed using epoxy res in and paint. Simply fill the scratch with resin, leave to dry for 24 hours in a ventilated area, then paint to match with the surrounding rattan.

How to fix a broken rattan strand?

To repair your rattan strand, simply cover the break in the rattan with epoxy resin, forming it with a sculpting tool to look similar to the surrounding rattan edges. Leave it to set and harden for at least 24 hours, and do so in a well ventilated area. You may have to paint the surrounding area to blend in the fix perfectly.

What are the benefits of rattan furniture?

Another benefit is that it is lightweight, making the furniture, like plastic rattan tables and chairs, easy to move.

How Can I Repair a Resin Wicker?

To repair your resin wicker furniture, you will need a few tools. You will need new resin wicker strips, manicure scissors or box cutter, and plastic epoxy. Optionally, you will want to match the wicker color with matching paint or spray paint.

Why is plastic wicker furniture durable?

Plastic wicker furniture lasts for a long time because they are durable and weather resistant. If you clean the furniture regularly, it will give you a nice look that outlasts regular wicker furniture. Another benefit is that it is lightweight, making the furniture, like plastic rattan tables and chairs, easy to move.

How to epoxy a weave?

With the help of a paintbrush, apply the epoxy in the empty space and insert the new strip in the weave. Lastly, connect the strips to the epoxy.

What to do if resin strips are loose?

If the resin strips are loose, you can reattach them with glue. You can use resin epoxy.

How to match furniture color?

Try to match your furniture’s color or you will have to do a touchup with matching paint. Then, you will need a pair of needle-nose pliers. For the finishing touch, you will need a paintbrush and a similar colored paint. Spray paint will also do the job to match your color or redo the color of your furniture.

How long does epoxy take to set?

Give the epoxy a few minutes to set correctly. It will get harder as time goes on.

How to Repair Rattan Furniture in a Few Easy Steps?

However, as the use time goes, it is understandable that there are small defects in the rattan furniture set that need to be repaired. But this is not a big problem that you need to worry about, because we have sorted out a few common problems that may occur in rattan outdoor furniture for you below, and also listed a simple guide for you to help your rattan garden furniture quickly restores its original tip-top condition.

How to soften rattan furniture?

Apply a hairdryer to gently heat your rattan furniture set to help soften the weaves of the worn parts.

Why do my outdoor chairs shake?

Most of this condition is occurs with the reason that your garden floorboard is uneven or the rattan outdoor furniture is not placed properly. At this time, you only need to lay down some materials to adjust the surface of the floor to even it out. But of course, it is not ruled out that damage to the rattan furniture set will cause the chair legs to shake a little.

Why add more cushions to rattan outdoor furniture?

Excessive sagging of seats requires you to add more cushions to your rattan outdoor furniture set to balance the seat weight distribution of rattan garden chairs and thus reduce the pressure on the rattan. However, most furniture manufacturers also take this into consideration and design rattan garden furniture comes with cushions, so this situation is not common.

How to clean a rattan sofa?

If your rattan sofa set has a slight sagging seat, you can try to wipe the seat with warm water and let it dry fully for 24 hours. Then you can find that the strands of the rattan garden sofa have been shrunk back to their original shape.

Can rattan furniture break?

If you notice some split or broken ends on your rattan garden chair, rattan dining furniture, or rattan sofa set. Then you should attempt to fix it before it starts to unravel and cause a much bigger problem. However, synthetic rattan is very strong and elastic, so the strands on high-end synthetic rattan garden furniture will not break easily or frequently.

Can you repair a rattan garden set?

By using the right tools and techniques to follow these simple methods, no matter what kind of small problems your rattan garden set has, it must also be nothing to you. Because I believe you can easily repair it and let your rattan style furniture sparkles again.