Repairing Guides

how to repair tear in puffer jacket

by Porter Pagac Published 3 years ago Updated 2 years ago
image

Instructions

  1. Create a patch How to repair a puffer jacket – cut out a patch of Tenacious Tape slightly larger than the hole Using your scissors, cut out a ...
  2. Round the edges How to repair a puffer jacket – round any edges to keep the patch from catching on things Round off any sharp corners or edges ...
  3. Apply the patch

Full Answer

How do you fix a hole in a puffer jacket?

How to repair a puffer jacket – place the patch over the hole and apply pressure Pull the backing off the tape and place your patch over the hole. Apply pressure to the patch, working from the center out to remove any air bubbles.

How to repair a tear in a down jacket?

1. Apply an alcohol swab to the tear/hole, cleaning it of any dust, dirt or grit. Make sure you apply the swab to a greater area than your down jacket patch size. If there are any long threads from the tear, use your scissors to trim these. 2. Cut your down jacket repair tape or down jacket patches to a suitable size, rounding the edges as you go.

How do I repair a rip or tear in the leather?

Clean the repair area with isopropyl alcohol to remove any dirt or body oils that may prevent a good bond. Trim any loose threads or feathers. Peel off the backing on a Tenacious Tape Mini Patch or Gear Patch and apply it over the rip, tear, or hole. Patch should overlap tear by 0.5" (12 mm) in all directions. Apply pressure from the center out.

Is your north face puffer jacket in need of repair?

After a night of desert shenanigans involving flaming Roman candles a few weeks ago my favorite North Face puffer jacket is in need of some light repair. Thank the gear gods for Tenacious Tape.

How to keep patch from ripping off?

How long does a patch last?

image

Can you fix a tear in a puffer jacket?

It's generally not a good idea to try and sew up a rip or a tear in a down jacket. Due to the very lightweight face fabrics used in the construction of most down jackets, you'll need a very fine needle and thread to do the job, and even tiny needle holes can cause surprisingly dramatic down leakage.

How do you repair a hole in a puffer jacket?

Prep the area: Clean the area around the hole with your rag and rubbing alcohol. Apply the patch: Make sure to smooth out the jacket to avoid wrinkles, then press the patch into place with your fingers. The patch will take about 48 hours to fully cure, so be gentle with it for the first couple days.

Can you fix a ripped down jacket?

0:086:54HOW TO FIX A DOWN JACKET [4K HD] Ripped and Tears Repaired ...YouTubeStart of suggested clipEnd of suggested clipYou could use this for any jacket. That is made out of synthetic. Materials. That might kind of beMoreYou could use this for any jacket. That is made out of synthetic. Materials. That might kind of be like the nylon outer on a Down Jacket specifically. These two that we're gonna work on are down

How do you fix a small hole in a North Face puffer?

Cut your patch or repair tape to size, to completely cover the hole (tip: circular shapes are better as there are no hard edges to catch and loosen over time). Lay the jacket on a flat surface. Apply the patch, smoothing out any wrinkles.

How do you fix a tear without sewing?

Cut a thin strip of self-sticking garment tape just long enough to cover the tear. ... Cut a thin piece of heat-activated hemming tape to the length of the tear. ... Select or cut a patch that is slightly larger than the tear you must repair. ... Apply a thin line of fabric glue along one edge of the tear.

How do you fix a cigarette burn hole in a jacket?

0:063:58Repairing a Hole or Cigarette Burn - YouTubeYouTubeStart of suggested clipEnd of suggested clipRoll. It into a little ball in your fingers. Working on the wrong side of the fabric. Place it intoMoreRoll. It into a little ball in your fingers. Working on the wrong side of the fabric. Place it into the hole. And press it down firmly.

How do you sew a tear in a jacket?

0:101:48How to repair a rip in clothing - Sew torn clothes - No machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust going in through the same side of fabric. And out through the other side and every now and thenMoreJust going in through the same side of fabric. And out through the other side and every now and then just put your needle through the loop of thread.

How do you fix a tear in fabric?

0:034:34How to Mend Rips in Clothes - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlong with your scissors. And sewing machine ok to start off with I'm just going to give the littleMoreAlong with your scissors. And sewing machine ok to start off with I'm just going to give the little ripped area a press with the iron just to get all the threads to stay down nice and flat.

How do you sew a hole without it showing?

0:001:49How to fix a hole in clothes - Sewing holes shut by hand no ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can even put your needle through that loop of thread. And then pull it shut and that makesMoreAnd you can even put your needle through that loop of thread. And then pull it shut and that makes it really nice secure knot.

How do you repair a torn nylon?

2:296:20Repair Ripped And Torn Nylon Fabric The Easy Way! - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr something to cut the tenacious tape with and then you're gonna need what I did just did just aMoreOr something to cut the tenacious tape with and then you're gonna need what I did just did just a little I just got a little cloth here with little just a real real real small amount of just some dish

How do you repair a tear in polyester?

There are two basic ways to repair or mend fabric holes for most household applications. You can use an iron-on patch designed for polyester fabric repair or you can overlay a polyester patch to the back of your fabric and machine stitch the two fabrics together. Both types of repair will extend the life of the fabric.

Can nylon be patched?

For every RIP, TEAR, WEAR and HOLE. RIP FIX (Repair All) nylon repair patches are designed for all of your fabric repair needs. The ultra-strong adhesive sticks extremely well.

How do you sew a hole without it showing?

0:001:49How to fix a hole in clothes - Sewing holes shut by hand no ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can even put your needle through that loop of thread. And then pull it shut and that makesMoreAnd you can even put your needle through that loop of thread. And then pull it shut and that makes it really nice secure knot.

How do you fix a hole in a nylon jacket?

How to Repair a Down or Nylon JacketClean the repair area with isopropyl alcohol to remove any dirt or body oils that may prevent a good bond. ... Peel off the backing on a Tenacious Tape Mini Patch or Gear Patch and apply it over the rip, tear, or hole. ... Apply pressure from the center out.

How do you fix a tear in a winter coat?

Bring the edges of the tear together. Squeeze a thin layer of urethane-based seam sealer on the fabric patch and on the torn area of the garment. Lay the patch firmly over the tear, smoothing it firmly from the centre out to remove any wrinkles or bubbles. Let your repair dry overnight.

How do you fix a burn hole in fabric?

2:005:34Repair cigarette burn in clothes - YouTubeYouTubeStart of suggested clipEnd of suggested clipRoll. It into a little ball in your fingers. Working on the wrong side of the fabric. Place it intoMoreRoll. It into a little ball in your fingers. Working on the wrong side of the fabric. Place it into the hole. And press it down firmly. Add a little bit more of your bonding powder.

The Best Way To Fix Ripped Down Jacket - YouTube

Check out our updated version of this video with better lighting:https://www.youtube.com/watch?v=yRCU8Zm125w&t=1sPRODUCT USED: https://www.stormsure.com/inde...

Down Jacket Repair Patch Kit (Self-Adhesive) 24 Colours BLACK

Our repair patches are of the highest quality (beware of cheap imitations!). 7 x Self Adhesive Repair Patches per Kit. Each kit contains 7 perfectly sized patches: Five x "circles" (smallest 1.6cm - largest 4.1cm diameter); Two x "ovals" (smaller 3.8cm x 5.7cm and larger 4.5cm x 6.2cm).

Amazon.com: puffer jacket repair

10 Sheets Repair Patches Down Jacket Black Nylon Fabric Patch Winter Self Adhesive Nylon Patch Different Size and Shapes Clothes Patches Clothing Repair Patch Kit for Down Jacket, Tent Clothes, Bag

Repairing a Hole in a Nylon Jacket | Our Everyday Life

Nylon fabric is commonly used for outdoor wear, providing protection from the elements and warmth when it's lined. Because people wear nylon jackets during times of active sports, camping and other activities, the fabric is frequently exposed and can be damaged easily through tears and burns.

How to keep patch from ripping off?

Round off any sharp corners or edges on the patch. This will keep the edges of the tape from accidentally catching on things that can rip your patch off.

How long does a patch last?

Allow the patch to set for a while before washing and the repair should last for years to come.

What to use to patch a hole in a jacket?

Duct Tape. For field repairs, where you just need to patch a hole quickly, the classic solution is simply to stick some tape over the rip or tear. Duct tape or gaffer tape generally works well, as it sticks to most fabrics, and is an item that most climbers and hikers carry in case of emergency. If the down fill of your jacket is escaping, try ...

How to fix a down jacket that is leaking?

If the down fill of your jacket is escaping, try to poke it back inside the jacket. Rip off a strip of tape large enough to cover the tear and stick it carefully over the damaged area. Smooth out the tape to ensure a good hold.

What is a down jacket?

Whether you’re climbing, hiking or backpacking, a down jacket is almost always a useful item to have stashed in your backpack. Modern jackets are tougher than they look, largely due to the use of ripstop fabrics. However, down garments are still susceptible to wear and tear. After all, when it comes to kit the great outdoors has more than its fair share of hazards. That might be a hole caused by a flying spark from a campfire, a ripped sleeve caught on a stray branch or a snag in the shoulder from the rogue pick of an ice axe. Fortunately, with the right know-how it’s easy to repair a down jacket.

What companies repair down jackets?

An alternative option is to contact a specialist independent company. Scottish Mountain Gear, Lancashire Sports Repairs or Mountaineering Designs are good examples. These three companies have a wealth of experience in repairing down products to an extremely high standard. As well as fixing holes, rips and tears, they can even replace or top up lost down. This will ensure your jacket continues to keep you as warm as it should.

Who makes nylon patch?

These are made by a number of companies including McNett Gear Aid, Kleiber, Down Jacket Repair, Prym and Dritz. They are available in a variety of colours. Most are self-adhesive, eliminating the need to glue or heat-seal the patch.

Can you patch a down jacket with duct tape?

A down jacket patched with duct tape will also add to your gnarly climber’ or ‘rugged outdoorsman/woman’ credentials. Note that duct tape is difficult to remove once applied. If you’re considering having the jacket professionally repaired when you get back to civilisation (see final section), use sparingly.

Does duct tape work?

Duct tape. It might not be subtle, but it works!

How to repair a down jacket?

Here are the three steps to a solid down jacket repair job: 1. Apply an alcohol swab to the tear/hole, cleaning it of any dust, dirt or grit. Make sure you apply the swab to a greater area than your down jacket patch size. If there are any long threads from the tear, use your scissors to trim these. 2.

What is a down jacket repair kit?

A down jacket repair kit contains a few precious items that you should carry with you if on a multi-day hike. You don't want to risk grit entering your jacket, making repairing a down jacket so much harder once you get back home.

Does washing a down jacket make it last longer?

Regular washing will help your down jacket last longer and perform at its best.

Do down jackets need surgery?

Repairing a down jacket does not require any major surgery, but simply some nimble fingers, patience and a special patch to keep that precious down where it belongs: keeping you warm.

How to patch a tear in a tentacle?

Peel off the backing on a Tenacious Tape Mini Patch or Gear Patch and apply it over the rip, tear, or hole. Patch should overlap tear by 0.5" (12 mm) in all directions.

How long does it take for Tenacious tape to adhere to a sleeve?

If you do a repair before cleaning the gear, wait at least 24 hours for the Tenacious Tape patch to adhere properly before washing it.

What tape do you use for cuffs?

When extra strength is required especially for high-wear areas (e.g., cuffs and knees), apply heat on the Tenacious Tape Mini or Gear Patch after application on the outerwear. For repairs on waterproof-breathable fabric that get more moisture and scrapes, use Tenacious Tape GORE-TEX Fabric Patches with heat.

Do you wash down before patching?

Before making a patch repair, clean down and nylon gear first. Using our Revivex formulas, hardworking ski jackets, pants, and rainwear stay fresh and will continue to protect us from the elements. Read our blog to learn how to wash GORE-TEX fabrics or find out how to wash down jackets so they keep performing at their best.

Where to send jackets for repair?

Professional repairs: If you’re not up for DIY repairs, or you have a really large rip, consider sending your jacket to Rainy Pass Repair, the nation’s largest outdoor gear repair service and repair partner for REI.

How to cover a hole in a jacket?

Cut the patch: Use your scissors to cut a patch that will cover the hole with about one inch of overlap in every direction . If you round the edges of the patch, it will last longer.

How long does it take for a patch to cure?

Apply the patch: Make sure to smooth out the jacket to avoid wrinkles, then press the patch into place with your fingers. The patch will take about 48 hours to fully cure, so be gentle with it for the first couple days.

How to keep patch from ripping off?

Round off any sharp corners or edges on the patch. This will keep the edges of the tape from accidentally catching on things that can rip your patch off.

How long does a patch last?

Allow the patch to set for a while before washing and the repair should last for years to come.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9