Follow these steps to make that tear go away for good: Remove the cover from the pool and place it on a flat surface Make sure there is no residual water on the material Take the adhesive and fit it so it rests perfectly around the torn area and gently press into place MESH POOL COVER REPAIRS
Full Answer
Can you repair a tear in a vinyl pool cover?
However, vinyl pool covers, which are also referred to as solar pool covers, have a tendency to develop tears and become discolored. Repairing a tear or hole in a vinyl pool cover is simple.
Can a shade tree pool cover be repaired?
For safety pool covers, if the repair is too much for a shade tree pool cover repair – you can send it off to the manufacturer – but you may have to contact the dealer whom you purchased the cover from and have them get a PO number for your cover.
What is a solar reel for pool covers?
By using a solar reel, it will extend the life of a cover and prevents the tearing of the cover or UV damage. Solar reels come in various widths and to fit in-ground or aboveground pools.
What kind of tape do you use to repair a pool cover?
Other tapes that could be used include Nashua 361-11 Waterproofing Tape and 3M 6969 industrial tape. For safety pool covers, the type that anchor into the deck, we carry an appropriately named safety cover patch kit. Just peel and stick, for pool cover repairs up to 8″ long, or link them together for longer tears.
Can you patch a solar pool cover?
Covering It All You can DIY repairs to solar covers and solar reels. Protect your solar cover from sun, chlorine and low pH for twice the life!
How do you fix a ripped pool cover?
Just clean and dry the cover, and place the patch over the tear. Letting the patch set overnight before use would be ideal. Other good patching options to use that you might already have around the house would be rubber cement to glue the torn areas back together, or duct tape.
Why is my solar cover falling apart?
Over time, the Sun's UV rays, and also pool chemicals, break down the material pool covers are made from. It doesn't matter how much you pay for your pool cover, this will happen eventually. The better brands can last 4+ years. The cheaper brands can break down in as little as 8 months.
Can you sew a pool cover?
Sewing, Inc. will repair holes, chafe strips or other damage. Or match the straps to your concrete anchors bolts and duplicate your inground pool cover EXACTLY. We use only the highest-grade commercial fabric to make our residential pool covers.
How do you glue a pool solar cover?
Most bubble type solar covers are made of polyethylene, which cannot be glued by almost any type of glue. IPS Weld On adhesive #1829 might work. Polyethylene plastic is heat sealed to join two pieces together.
Why are there holes in pool covers?
For safety reasons; if someone should end up under the pool cover, air will come in through the holes. These small holes prevent a large pool of water from getting on the pool cover.
How long does a solar pool cover last?
Most solar covers last for up to three years, though many people replace them more frequently. Utilizing a solar cover and taking advantage of the return lines in your pool is another way of prevent evaporation as well as distributing the warm water throughout all your pool and quick more efficiently.
Does a solar pool cover need to touch the water?
Generally, solar covers grip pretty well to the water surface and do not require anything to weigh them down or prevent blowing.
Can you use bubble wrap as a solar pool cover?
There are various options available when it comes to solar pool covers. While bubble wrap can be used, it is not the most useful material but can still provide some benefits. Black plastic is a better option and can help to heat your pool significantly.
How do you make a homemade pool cover?
How to DIY a Pool Cover (In 7 Steps)Step 1: Measure For PVC Pipe Length. ... Step 2: Go Shopping! ... Step 2.5: Glue PVC Sections Together (Optional) ... Step 3: Add an Endcap & Make Your Hand Crank. ... Step 4: Make Clips to Attach the PCV Pipe to the Cover. ... Step 4.5: Paint the Clips and Pipe (Optional)More items...•
What can I use to make a pool cover?
Tarps. An ordinary tarp from the hardware store or home center can also make a cover for an above-ground pool, since many are made from the same polyethylene material used for commercial pool covers. However, unlike purchased covers, tarps are rectangular, so they pose some challenges to hold in place.
Can you repair a loop Loc pool cover?
In most cases LOOP-LOC covers can be repaired, but in order to make the determination the cover must be evaluated at LOOP-LOC to determine the extent of damage, along with the cost of the repair. For holes 3" or smaller, LOOP-LOC sells Self-Adhesive Patch Kits. The patch size is 4" x 8" and come 3 to a pack.
How do you repair a loop Loc pool cover?
In most cases, rips and tears in LOOP-LOC pool covers can be easily repaired, either by using a self-adhesive patch kit(for holes smaller than 3" x 3") or by contacting your local LOOP-LOC pool cover dealer, who will provide more information on sending your pool cover out for repairs.
How do I get my pool cover back on track?
0:223:40Pt. 14 Troubleshooting - Cover-Pools Save-T 3 Owners Manual - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck for any obstacles dirt. Or water on the cover confirm. That your pool water level is okay andMoreCheck for any obstacles dirt. Or water on the cover confirm. That your pool water level is okay and check the condition of your track. Police then try operating the cover in the reverse direction if.
How to repair a tear in a pool cover?
Repairing tears is simple. If you are working with a mesh pool cover, simply sew on a mesh patch over the damaged area. If the tear is not large, you may be able to simply sew up the tear using a needle and industrial strength nylon thread. If you are working with a net pool cover, repair methods are slightly different.
How to fix discoloration on pool cover?
However, if the discoloration is caused by chemical residues, mold, or mildew, you can fix the problem. In this case, you will want to fill a plastic tub with 1 gallon of water and 1 cup of bleach. Lay the pool cover flat on the ground and use a rag dipped in the bleach solution to wash off the residue, mold, or mildew. Allow the cover to dry before putting it back over your pool.
Why does my pool cover get damaged?
It is caused by exposure to the sun, the physical force covering and uncovering the pool and by exposure to pool chemicals. Fortunately, most damage can be repaired at home using inexpensive tools and products.
What is a vinyl pool cover?
Vinyl pool covers are durable and help prevent heat, chemical, and water evaporation. However, vinyl pool covers, which are also referred to as solar pool covers, have a tendency to develop tears and become discolored. Repairing a tear or hole in a vinyl pool cover is simple.
How big of a tear in pool cover?
Any small rip or tear in a pool cover under 6″ in length is a pretty easy repair. But, if you’ve got a rip along one whole side of the cover, or if the tear is long and curved, then repairing the pool cover may be impossible, or with little chance of success, like the picture shown right.
What is a valid warranty claim for a pool cover?
Speaking of warranty, about the only valid warranty claim is a pool cover that has separated along the seam, for floating type pool covers. Most everything else is either an Act of God, or neglect (not keeping it pumped off and clean).
How long do safety covers last?
Safety covers typically have a 10-12 yr warranty , and can last much longer. But again, it doesn’t cover tree branches, or snow loads, which tend to cause the most damage, with punctured material, or broken straps.
How old is a pool cover?
Age of the Pool Cover. If your pool cover is only a couple of years old, and shows no other signs of deterioration (other than your current problem), then you may want to consider patching it, especially if it was an expensive cover, with a long warranty.
Can you repair a pool cover?
You could also send it to one of the many companies that do industrial sewing, making repairs to pool covers, sails, awnings, tents, boat covers and such. You may have one located nearby that has the space and equipment to handle pool cover repair.
Can you send a pool cover off to the manufacturer?
For safety pool covers, if the repair is too much for a shade tree pool cover repair – you can send it off to the manufacturer – but you may have to contact the dealer whom you purchased the cover from and have them get a PO number for your cover.
Can a safety cover be repaired?
Safety covers may lose their straps along one side of the pool, like the picture above, or have damage to several panels. Even such major damage could still be a candidate for repair by the factory, or local pool cover repair company, if the cover still has a lot of life left in it.
Solar Cover Repair
I've got one of those solar covers and a seam or two is starting to tear. I've inherited this cover from the previous owner and I'm trying to get as much life out of it as possible. I'm fairly certain that I can get at least one more season. Is there any tape or anything out there that I can use to help keep this cover alive?
Re: Solar Cover Repair
Gorilla tape works great. We cut our cover in sections to make it easier to put on/take off and taped all the cut seams with it. It stands up to the water and sun exposure very well.