To repair this problem:
- Loosen the set screws under the towel bar and remove it from the wall.
- Loosen the bracket screws and remove the brackets from the wall.
- Insert toggle bolts in each bracket.
- If needed, enlarge the bracket holes in the drywall with a screwdriver, and insert the toggle bolts in the holes.
- Tighten the toggle bolts so the brackets are secure.
- Mount the towel rack on the wall and tighten the set screws.
How do you fix a loose towel bar on a wall?
Over time pressure on the towel bar can cause it to work loose. To repair this problem: Loosen the set screws under the towel bar and remove it from the wall. Loosen the bracket screws and remove the brackets from the wall. Insert toggle bolts in each bracket.
Why is my towel bar not working properly?
Over time pressure on the towel bar can cause it to work loose. To repair this problem: Loosen the set screws under the towel bar and remove it from the wall. Loosen the bracket screws and remove the brackets from the wall.
How do you attach a towel rack to the wall?
Loosen the bracket screws and remove the brackets from the wall. Insert toggle bolts in each bracket. If needed, enlarge the bracket holes in the drywall with a screwdriver, and insert the toggle bolts in the holes. Tighten the toggle bolts so the brackets are secure. Mount the towel rack on the wall and tighten the set screws.
Do towel bars hold up to wall anchors?
Plastic wall anchors, such as the type included with some towel bars, also won't hold up over time, especially if you're hanging heavy or wet towels to dry. Instead, reinstall the towel bar with toggle bolts after widening the existing screw holes in the wall.
How do you fix a drywall towel bar?
0:4613:40How To Install A Towel Bar In Drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you use the bracket which comes with the towel bar and these bolts which you'll have to purchaseMoreSo you use the bracket which comes with the towel bar and these bolts which you'll have to purchase on your own most and will come with this you drill a big enough hole in the right position stick.
How do you fix a metal towel rack?
0:003:32How to Repair & Hang a Loose Towel Bar Holder - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we'll start by removing this bracket usually there's a screw underneath use a small flat-head.MoreSo we'll start by removing this bracket usually there's a screw underneath use a small flat-head. Screwdriver.
How do you fix a hollow wall towel rail?
1:512:47How To Install A Towel Rail Into Plaster - DIY At Bunnings - YouTubeYouTubeStart of suggested clipEnd of suggested clipPerfect now that's up there I simply just need to use the allen key on the spacers to tighten itMorePerfect now that's up there I simply just need to use the allen key on the spacers to tighten it against the wall. And then we're done. Now. That they tighten up that's finished.
How do you fix a ceramic towel bar?
0:131:35How To Install A Replacement Towel Bar - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide it into the holder. Push it side to side to little center itself. So with the bar in placeMoreSlide it into the holder. Push it side to side to little center itself. So with the bar in place that's it you just replace the bar.
How do you fix a bathroom towel rail?
1:503:52Bathroom towel bar repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe next step is to take the towel bar bracket and the new spiral wall anchors come with the newMoreThe next step is to take the towel bar bracket and the new spiral wall anchors come with the new screw and I'll just thread them in through the bracket. Clockwise with the Philips. Screwdriver.
How do you fix a hand towel rack?
0:036:56How To Fix A Hand Towel Holder That Came Out Off The Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd so what i recommend is to get these toggle bolts. And just have a box of them around i'll put aMoreAnd so what i recommend is to get these toggle bolts. And just have a box of them around i'll put a link in the description. Below they make these in all kinds of different sizes and strengths.
What do you need to patch a hole in a wall?
MaterialsConstruction Adhesive.Drywall Tape.Masking Tape.Drywall Screws.Joint Compound.Drywall Patch Kit.Drywall Scraps.Drywall Patch Plaster.More items...
How do you glue a towel bar to the wall?
Apply a small bead of Loctite® Power Grab® All Purpose Construction Adhesive to the back side of each end piece. Position the ends in place below the pencil marks and press firmly into place. For added assurance, place masking tape over each piece adhering it to the wall or tiles. Allow the glue to dry for 24 hours.
How do you repair drywall?
2:557:41How to Repair Drywall -- Buildipedia DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis. It's going to be pressing into that patch. It's going to give a little bit start with a kindMoreThis. It's going to be pressing into that patch. It's going to give a little bit start with a kind of thick. Use your panda. Clean off the knife. And go back. And work on your patch.
How do you attach ceramic towel bar to ceramic tile?
0:047:05Install a towel bar on a porcelain tile wall. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a tile this is our drill bit you want to go in on an angle about a 45 degree angle or so ifMoreThis is a tile this is our drill bit you want to go in on an angle about a 45 degree angle or so if you go in straight down like that what happens is is it just dances on the surface.
How do you reattach a ceramic towel rack to the wall?
0:114:25How to reattach a broken ceramic towel rack - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull it back right then what we're going to use is some all-purpose interior constructionMoreAnd pull it back right then what we're going to use is some all-purpose interior construction adhesive okay so basically what you what this is is really strong glue.
What can you do with a towel bar?
22 Brilliant Towel Bar Organization HacksDIY Scarf Rack. This DIY scarf rack is such a great idea to keep your scarfs organized and visible. ... Cleaning Supplies Organization. ... Craft Paint Storage. ... Pot Lid Organizer. ... Kitchen Utensil Organizer. ... Organize Writing Utensils.
How do you reattach a towel rack?
Fix loose towel bars with better anchorsLoosen the setscrew. Loosen the setscrew that fastens the post to the mounting plate. ... Drive in the anchor. Drive the toggle anchor into the old anchor holes with a drill containing a No. ... Close up of toggle anchors and screws.Tighten the screw.
How do you tighten a towel bar without set screws?
0:006:39How To Take Off Or Tighten Hand Towel Bars TP Holders ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd pull it down it's got as a spring here. So you can see the spring. This one I need to tighten.MoreAnd pull it down it's got as a spring here. So you can see the spring. This one I need to tighten.
How do you disassemble a towel rack?
0:232:32How to Remove Towel Bar from Wall - Loosen Set Screw to ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide some towel bars installed by your home builder might have screws that can be removed by a microMoreSide some towel bars installed by your home builder might have screws that can be removed by a micro flathead screwdriver.
How do you put a towel bar back on?
0:421:47How to Install a Towel Bar | DIY Bathroom Renovation IdeasYouTubeStart of suggested clipEnd of suggested clipAnd if you're using drywall anchors gently tap or drill them into. Place. Using the hardwareMoreAnd if you're using drywall anchors gently tap or drill them into. Place. Using the hardware provided firmly secure the mounting brackets to the wall with a drill or screwdriver.
What to do if towel bar is out?
If your towel bar is out, make sure that you repair it or you’ll have no other place to put the towel. The towel bar can also make your home look more luxurious and repairing it back into the wall is one way of home improvement but there are many more.
What to do if towel bar is pulled out of wall?
In conclusion, whether your towel bar was cleanly pulled out of the wall or a horrific hole is left behind, anchors are really the best way to go. They can take advantage of the small and or larger holes left behind from the screws being ripped from the walls. And since they are anchors, they will hold a lot more weight than last time, lowering the chance this will happen again.
What if the hole is too big?
Believe it or not, you can still salvage the situation, even if the hole looks too big. If someone ripped the towel bar from the wall, and it left a hole too large for a simple anchor, you can turn to a toggle bolt anchor (View on Amazon). Yes, it’s still an anchor, but it’s one of the toughest out there.
How much weight can a wall anchor hold?
Each anchor can hold 50 pounds, and this multiples the more anchors you use, which means four anchors will amount to 200 pounds of strength. That may sound like overkill, but it doubles as a preventative measure for the future. Insurance, in other words.
Can you reuse support brackets?
Tip: You can reuse the support brackets if they’re in good shape.
What is a towel bar template?
Most towel bars come with a template that makes positioning the mounting hardware much easier. The template may be a sheet of paper, or it may be the back of the box. In either case, cut it out along the lines indicated in the illustration.
How high should a towel bar be?
Though ideal height is subjective depending on the reach of household members who are using the towel bar, Greydock recommends placing the bar somewhere between 42 and 48 inches high.
How to reattach bar brackets?
Reattach one of the bar brackets or end pieces to its mounting plate, tightening the small setscrew on its bottom end. (Skip this if one bracket is still secure on the wall.)
How to use toggle bolts?
If you are using a toggle bolt, push the bolt through the center hole on the mounting plate and thread on the toggle wings. Drill a pilot hole in the wall that is large enough for the toggle wings to fit through when closed.
How to secure a loose bracket?
Secure it in place by tightening the bottom setscrew with an Allen wrench or small screwdriver.
Where is the setscrew on a towel bar?
The setscrew is usually located on the bottom of the bracket. Place one end of the towel bar into the bracket mounted on the wall. Loosen the setscrew on the second towel bar bracket/end piece and then fit the bracket onto the loose end of the towel bar. Position the bracket over its mounting plate and tighten the setscrew.
What is a toggle bolt?
Toggle bolts keep a steady grip on the towel bar hardware and won't pull through the wall under force. They also come in handy for repairing a towel bar that's loose or that has partially pulled away from the wall. Advertisement.
What tools will you need to install a towel bar in tile?
To install a towel bar into tile the tools required and the process is very similar to installing a towel bar into drywall with the exception of the type of anchors used and the type of drill bit used. For tile, you will use a masonry bit and use plastic tube anchors. As with drywall you would like to install your towel bar or any fixture in the bathroom to a wall stud where it is possible. This can be accomplished by simply using wood screws instead of anchors, however, if the tile will be near the shower or will impact water you want to ensure the sure you are using are galvanized so they will not rust. In addition to the towel bar and brackets, you will need drywall anchors, a drill, a masonry drill bit that matches the size of the anchor used, a level, a measuring tape, and a pencil.
How far should a towel bar be from the floor?
General guidelines install the bathroom towel bar at 48 inches from the floor. If you are installing the towel bar in a children’s bath you would want to install the towel bar at 36 inches from the floor.
What are the different types of drywall anchors?
Used for medium duty applications in the 50 pounds range depending on the thickness of the drywall
What are the two parts of a drywall anchor?
These types of anchors have two parts: the toggle and the bolt. As the bolt is driven into the hole the toggle is pulled securely to the inside of the drywall for a strong hold.
Can you use a masonry bit for a towel bar?
For tile, you will use a masonry bit and use plastic tube anchors. As with drywall you would like to install your towel bar or any fixture in the bathroom to a wall stud where it is possible.
Step 2: Clean the Attachment Plate for Your Towel Rack
Our towel rack has a separate plate that attaches to the wall first, and then the arm that holds the towel rack is tightened onto the plate.
Step 3: Put Toggle Bolts on Attachment Plate
Toggle bolts come in two pieces - the bolt and the then toggle, which is a spring loaded v-shaped nut that helps provide traction on the other side of the wall. You'll want to insert the bolts through the attachment plate to prepare for the install.
Step 4: Insert Toggle Bolts Through Wall
Pinch all toggles closed and carefully insert them though the holes in the wall.
Step 5: Tighten Attachment Plate to Wall
To tighten the bolts and secure the attachment plate in place, you'll need to pull forward on on the plate, creating tension on the toggles.
Step 6: Attach Rest of Towel Rack and Enjoy!
Once the attachment plate is in place, you can install the rest of the towel rack and then hang your towels.
