- Examine the Power Source. If there’s an issue with your tower fan, the first place to look is the power source. ...
- Remove Bottom Plate and Covering. Before you can resolve the issues inside your tower fan, you’ll need to remove the covering or protective layers that cover the electrical components.
- Inspect Electrical Components and Wiring. The next stage in repairing your tower fan is examining all of the wiring, connections, and electrical components within the device.
- Check the Fuse. Fuses are safety features in electrical appliances that serve a similar function to circuit breakers.
- Remove Contaminants. Another likely culprit of rotation issues in a tower fan is contamination. Dust and dirt can accumulate inside your fan over time.
- Replace Ball Bearings. If your fan is still not working, it could be due to an issue with the ball bearings inside the device.
- Apply Lubricants. As a general rule with DIY repair, if something is supposed to move and it’s not moving, apply some lubricant.
- Realign the Track. The motor that rotates the fan is usually connected to gears that attach to a track. ...
- Replace or Repair the Tilt Sensor. Some tower fans, especially newer models, contain a sensor that automatically prevents rotation when the fan tilts beyond 45°.
How do you fix a tower fan that won’t oscillate?
To fix a tower fan that won’t oscillate, unscrew the bottom plate and ensure the knob is aligned with the track. Push it into the U-shaped slot, then seal the plate. Next, test the electrical connections and ensure there’s no moisture inside. Make sure the motor’s bearings aren’t corroded, too.
How do you fix a fan that squeaks when it spins?
If the fan blades spin but the fan doesn’t emit air, cleaning out the blades usually helps. Thanks! A squeaking fan often isn’t a serious problem. You do need to open the fan’s casing, but adding a lubricant to the bearings gets the fan in working condition again.
How do I know if my Tower fan is bad?
Flashing, dull letters and numbers are a sign that it’s time to check the connections. One of the main reasons tower fans stop oscillating is they’ve fallen off their track. Misuse, bumping, and many other issues can knock the fan off its base without showing any signs (other than a lack of oscillation).
How do you remove the top panel from a tower fan?
Some tower fans have a top panel holding the front and back ends together. Pry the top panel up first to make loosening the other panels easier.
How do you fix a tower fan that stops working?
Inspect the Fan's Power Cord If it's not fully plugged into the wall, it won't have enough electricity to function. Check the connection and make sure the cord isn't loose. Wiggling connections can cause all sorts of problems. In most cases, your tower fan won't even turn on if it's not plugged in all the way.
How do you service a tower fan?
Start by simply wiping the inner ring of the fan with a microfiber cloth. A vacuum attachment can be used to remove dust from the fan's vents. After unscrewing the top portion of the fan (review manufacturer instructions for this step), use a microfiber cloth to clean dust and dirt from the interior of the fan.
How do you fix a standing fan that won't spin?
Press the straw that came with your metal lubricant spray into the nozzle of the can. Shake the can several times and then put the end of the straw into the center of the fan blade unit and spray the lubricant several times. Rotate the fan by hand and do this again.
How do you fix a wobbly tower fan?
4:239:32How to fix a wobbling / leaning Oscillating Tower Fan - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo looks like in order to fix this you just need to tighten the nut over here. So I'm going to doMoreSo looks like in order to fix this you just need to tighten the nut over here. So I'm going to do that now make its locus see strip fire a small adjustable wrench.
How do you take apart a tower fan?
0:002:53Clean your tower fan - YouTubeYouTubeStart of suggested clipEnd of suggested clipI happen to have a flat tip screwdriver. I kind of guide it down. Until I hear a pop so slide itMoreI happen to have a flat tip screwdriver. I kind of guide it down. Until I hear a pop so slide it down and pop it now then move to the other side. And kind of pull it apart and slide the screwdriver.
How do you clean a tower fan without taking it apart?
The easiest way to do this without scratching the casing is by using the brush attachment on a vacuum cleaner. Clear away as much dust, lint, and other debris as possible. If you don't have a vacuum with a brush attachment, use a similar soft-bristled tool, such as a dust brush or a microfiber duster.
How can you tell if a fan fuse is blown?
Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.
Why is my fan motor not working?
If the fan doesn't start running, you may have a bad fan motor. If you have difficulty getting the blades to turn, there may be debris wrapped around the fan axle, or the motor bearings may be dirty or jammed.
Why do tower fans stop working?
If your tower fan is not blowing air, it usually means it is clogged. This could be due to debris limiting blade movement or dust blocking the grills. You can easily solve the problem by cleaning the tower fan. But if you leave it this way for too long, the fan may soon stop working.
Why is my tower fan rattling?
According to iFixit, your noisy tower fan might have loose bearings. These bearings become misaligned from vibrations, unbalanced fan blades, or running the fan on an uneven surface. A tower fan's bearings are on its motor shaft.
Why is my fan making a rattling noise?
A rattling ceiling fan can be caused by something loose, such as a screw that has fallen into the wrong place. Check the inside of the light fixture for a loose screw that may have come off and fallen into the glass globe. A rattling noise may also be caused by a loose or improperly installed bracket.
Why is my tower fan making noise?
According to iFixit, your noisy tower fan might have loose bearings. These bearings become misaligned from vibrations, unbalanced fan blades, or running the fan on an uneven surface. A tower fan's bearings are on its motor shaft. The shaft rotates the blades, but it needs a bearing to move.
How do you clean tower fan blades?
Lay the fan down on the surface. With a can of compressed air (for example, for cleaning keyboards), spray the fan's blades to loosen built-up dust and other debris. Using the brush attachment, vacuum the fan blades, moving up and down the length of the cylinder and slowly turning it.
How do you take apart a fan to clean it?
How to clean a fanRemove the fan's grill. ... Fill a sink with warm, soapy water. ... Unscrew the blade nut. ... Pull the fan blade off, and put it into the soapy water.Loosen the nut that holds the rear grill to the motor stem. ... Remove the rear grill. ... Check the front of the motor for any dust.More items...•
Do tower fans have filters?
Monthly Maintenance: Many tower fans have a filter that needs regular cleaning. Unscrew the air filter hatch and vacuum the filter or wash it with plain water.
How to check bearings on tower fan?
Open your tower fan, locate the motor, and check the bearings. They shouldn’t look rusted, corroded, or out of place. If any of these issues are present, you might have to get a new fan. Unfortunately, it’s very difficult to find a fan company that sells motors or bearings.
Why is my tower fan humming?
According to Hunker, quite a few tower fans are ruined from water spills. Don’t leave open containers near your fan if you want to prevent it from getting ruined. Water damage is easy to spot through the following signs and symptoms: Grinding, hissing, or humming could indicate water exposure to the bearings.
How many screws does a Vornado tower fan have?
Unscrew the bottom plate. Most tower fans have four to eight screws you can remove. My Vornado tower fan has four screws that hold one quadrant each. Remove all four screws and the bottom plate, then head to the next step.
Why do tower fans oscillate?
Oscillating tower fans efficiently ventilate your bedroom, living room, garage, and other parts of your home. The back and forth rotation prevents still pockets of air, optimizing airflow whenever they’re on. However, minor inconveniences can prevent a tower fan from oscillating as it should. Today, we’ll get to the source and fix the problem.
How to tell if a motor is in trouble?
Listen closely every time you test each oscillation setting. Random clicks and skipping noises are a sign the motor might be in trouble. The higher the setting, the louder the sounds will be. If that’s the case, get the parts guide and replace the motor (if possible).
Can water damage tower fans?
According to Hunker, quite a few tower fans are ruined from water spills. Don’t leave open containers near your fan if you want to prevent it from getting ruined. Water damage is easy to spot through the following signs and symptoms:
How to clean a fan tower?
Vacuum up the loose dust with a hose attachment. Keep the hose nearby as you brush out the inner portion of the tower. If you can, turn it on while you brush so it picks up most of the loose dust coming off the fan blades. Have someone else hold the vacuum hose if needed.
What to do if your fan is not working?
If you have a hard time getting your fan to work, take it to a professional repair shop. It often means the fan has a bigger problem than dust, such as a burnt-out motor.
How to stop fan blades from moving?
Unplug the fan and wait for the blades to stop moving. Always turn off the fan before attempting to open it. [4]
How to separate the top and bottom of a tower?
Try to separate the halves with your fingers first. Grip the top part of the case while pulling the front panel towards you with your other hand. Slide a flat-head screwdriver into the gap between the panels. Work down towards the bottom of the tower, using the screwdriver to further separate the panels.
How to get dust out of a fan?
Set the compressed air canister aside. Make sure nothing is in the fan’s vent before you turn it on. Then, plug the power cord back into the wall and let the fan run for a few minutes .
Why lay down a fan?
Laying the fan down makes the work a little easier. If your fan has a stand attached, consider unscrewing it temporarily in order to rest the fan on a flat surface .
How to dislodge dust from a machine?
Blow compressed air into the vent to dislodge dust. Aim the canister nozzle directly at the inside of the machine by placing it directly over the vent. Then, move the nozzle along the vent at a steady rate while releasing the air. Go over the entire vent with the canister.
