how to repair trex decking

• Few tips on how to restore Trex decking. Don’t make the mistake of using the wrong cleaner. ...
• Restoring Trex decking. Before you do anything else, you must first choose the correct finish, which means you must go with the one designed exclusively for Trex materials.
• Removing mold from Trex decking. Cleaning Trex decking with vinegar can help to remove mold. Remove as much surface dust and mold as possible with your hose.

Full Answer

How do you fix a hole in a Trex deck?

• Materials List.
• Clean the deck: Sweep excess debris (dirt and leaves) off the deck.
• Apply the composite deck stain: Stir product thoroughly.
• Clean-up: Following label directions, dispose of waste including roller covers and brushes in a water filled container.
• Frequently Asked Questions.
• Maintenance.

How to replace deck boards with TREX?

Trex can be installed over timber, steel or aluminum substructures with joist centers at a maximum of 400mm apart. If building over a timber substructure, you should consider using Trex®Protect™ self-adhesive butyl tape to prevent moisture damage. 2. Cut your boards.

How to repair deep scratches on Trex deck?

Here are a few ways to keep scratches at bay and maintain your deck:

• Use a woven rug designed for high-traffic spaces. A woven rug will help keep foot traffic from shoes from doing damage. ...
• Place pads under pieces of furniture that live on your deck. ...
• Put furniture away when it’s not in use. ...
• Use a broom instead of a shovel to clear leaves, snow or other debris. ...

What is the recommended joist spacing for Trex decking?

• The size of your deck joists
• Your framing material
• Your maximum joist span

When to throw away Trex pieces?

How to repair scratches on wood?

How to get tabs out of a board?

How to get wax off of a sandpaper?

How to get screw heads to show on one side?

How to secure a board in place?

How to remove a board from a board?

See more

About this website

Can Trex be repaired?

If you notice a scratch or damaged area on your Trex decking, fret not! If you have a small scratch or chip, use a composite deck repair kit. If you have a larger scratch, dent, or dings, it is best to replace the entire board. With a few tools, you can easily repair your deck and enjoy your patio.

How do you repair a hole in Trex decking?

Fill small holes, using a putty knife, with a mixture of fine composite board shavings and silicone caulk. The consistency of the mixture should be thick enough that it will not seep out of the bottom of the hole. Match the color of the caulk to the deck boards.

Is there a filler for composite decking?

For small scratches and surface marks, a Composite Decking Repair kit may be the best thing to help you fix your damaged Board. Repair kits often include wax or epoxy fillers to help remove/ cover up any scratched areas of your Deck.

Can you fix scratches on composite decking?

Another known method of removing signs of scratching on your composite decking is through the use of decking repair kits. You can buy them at most composite decking supply stores. They are fillers, often made out of wax or epoxy, which you apply to the scratches on your decking like a putty.

What to use to fill holes in composite decking?

For plastic or composite decking, use an epoxy filler to fill screw holes. Mix the epoxy with thinner and use a syringe to fill the holes. Allow the epoxy to dry, then sand it so that it is flush with the deck.

How do you fill holes in decking?

1:033:43How to Repair a Hole From Wood Rot, Fixing a Damaged 2X Framing ...YouTubeStart of suggested clipEnd of suggested clipI started with fiberglass resin mixing in the appropriate. Amount of hardener. I then added theMoreI started with fiberglass resin mixing in the appropriate. Amount of hardener. I then added the resin into the hole. Now the concept. Here is the thin liquid resin would work its way into any cracks.

Can you resurface Trex decking?

Resurfacing your deck with trex® is easy to do, and the results are easy to love. If the boards on your existing deck are looking a bit worn - and the foundation and deck framing system are sound - you can simply replace the walking surfaces and deck railings with Trex decking and railing.

Is there touch up paint for Trex decking?

Trex® Signature™ Aluminum Railing Touch Up Paint - 4.5oz Aerosol Can. Available in White (WH), Black (BK), Platinum (PL) and Bronze (BZ). Bronze color comes in kit of two cans.

How do you fix composite decking?

7:4510:34How to install a composite deck with Wickes - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlways use screws that are specifically designed for the job and make sure that all screws areMoreAlways use screws that are specifically designed for the job and make sure that all screws are secure. But not over tightened. Work your way down the board fixing the deck board to each support joist.

What should you not use on Trex decking?

Trex does not recommend the use of a pressure washer. The use of a pressure washer on deck surface could damage the decking surface and will void the warranty with respect to any condition caused by the pressure washing. Trex does not recommend sanding.

Do Trex decks scratch easily?

The short answer is yes. Trex decking features a hard shell that not only resists scratching but is also formulated to withstand long-term exposure to the elements with less maintenance than wood decking.

How do you remove scuff marks from Trex decking?

For minor stains, gently scrubbing it with a soft-bristle brush and some soapy water will often do the job. If the stain persists, you could use stain-removing decking products. You could also try using vinegar and baking soda. However, avoid using abrasive chemicals, such as chlorine-based bleaches and cleaners.

How do you repair composite wood?

Repair the decorative board damage with filler If the boards on your WPC decking have chips or small cracks. You can use a composite deck repair kit to repair them-it depending on the material and manufacturer of your boards. These repair kits usually consist of wax or epoxy-based fillers.

What is the warranty on Trex decking?

Trex is engineered to endure decades of foul weather and foot traffic …with the warranty coverage to prove it. With virtually every product covered by our 25-Year Limited Residential Warranty, you can rest assured that your backyard investment is well protected.

How do you make a composite plug?

Make Composite Deck PlugsStep 1: Hollow Punch Set. I thought I was stuck hammering shavings until I stumbled across a hollow punch set at a tool store. ... Step 2: Making the Plugs. Once the hollow punch goes all the way through, pull it out. ... Step 3: Finishing Up. Put the plugs over the screw heads and hit them with a hammer.

Can you caulk Trex decking?

This Trex Butyl Caulking creates ties together the RainEscape elements to double your deck space. Trex RainEscape Butyl Caulk works with Trex RainEscape Down Spouts and Troughs to funnel rainwater away from your underdeck space and into the gutter system of your choice.

Does Trex Decking Scratch Easily? Here’s What You Need to Know

Lumber rose +28% locally from November 2021 to January 2022, and is expected for another significant double-digit increase impacting us in June 2022.

Wood Filler for Trex Deck? - DoItYourself.com Community Forums

Decks, Patios, Porches, Walkways, Driveways, Stairs, Steps and Docks - Wood Filler for Trex Deck? - I had a mishap (OK I screwed up) while working outside on my Trex brand deck. I accidently made 2 cuts about a little more than 1/8 inch wide, 3 - 4 inches long and about 1/8 deep. What type of filler can I use to try to

What to use to remove tannins from deck?

If you clear the debris from your deck and notice tannin bleeds have caused discoloration, you can use a deck brightener to remove the stains. These deck brighteners contain oxalic acid, which removes tannins. Just ensure your deck is dry before applying.

How much pressure should I use to pressure wash composite decking?

If you pressure wash your deck, keep it on the lowest setting possible—no more than 3100 psi with a fan tip. Composite decking is much softer than natural wood. A pressure washing at too high a setting can encourage chipping, sun damage, and mold staining. Be sure to spray no closer than 8 inches away from the wood.

Can you use soapy water on Trex decking?

When cleaning your decking, be sure to use the correct cleaner when making your soapy water. Otherwise, you could cause surface damage that affects the appearance of your Trex deck. Composite decking such as Trex decking is porous and needs an oxygenated cleaner that can clean inside the deck and the surface.

Does composite decking need to be cleaned?

While composite decking requires less maintenance than other deck materials, it still requires cleaning to keep it looking fresh, especially after heavy snowfall or storms. Leftover debris can leave behind dirt, mud, and mold if not cleaned up properly.

Is Trex decking hardy?

Trex is an industry leader in hardy composite decking, which requires less daily maintenance than organic lumber decks. However, if your Trex decking has been through a few seasons already, it may be due for some basic care and restoration to get it back to full health. In this guide, we’ll go through the best basic practices for how ...

Does Trex decking need maintenance?

A deck transforms any outdoor space into a great year-round spot for gatherings and parties with friends or family. However, once you’ve installed your perfect decking, it does require some maintenance to keep it in tip-top condition. Trex is an industry leader in hardy composite decking, which requires less daily maintenance than organic lumber ...

Can you dry water off a deck?

Generally, hard water is something to avoid. If there is no other option, you can dry the water from the decking using a dry cloth. If there are already spots on the decking caused by hard water, you can remove them using white vinegar as a cleaning solution.

How to avoid lap marks on wood?

To avoid creating lap marks, plan your work so you can complete entire boards while the coating is still wet. In many cases, this means painting only three or four boards at a time. Work your way toward the steps or door so you have a way to exit without stepping on wet finish.

How much does Versacryl cost?

Versacryl, however, is not cheap. The manufacturer sells it directly to customers in three-gallon kits that cost $1,085 each and provide the recommended two coats for 400 square feet of decking. (There is no online order form; customers need to call or email.)

Can you paint composite decking?

Painting or staining vintage composite decking isn’t necessary to make the material last longer, but it can give the deck a new look — changing the color, eliminating stains from mildew or leaves, and evening out the color on decks where rugs or planters kept sunlight from reaching some areas.

Can Trex decking be stained?

A: You are correct. Vintage Trex decking and other brands of composite decking made of a uniform mixture of wood fibers and plastic can be painted or even stained. Newer styles of composite decking capped with a shell of different material on the top and sides of boards cannot.

Can you use a pressure washer on composite decking?

Do not use a pressure washer on non-capped composite decks. Rinse thoroughly with a hose, and let the decking dry. Apply the paint or stain when the boards are not in direct sunlight, which would cause the coating to dry too fast.

Do you need to primer a deck before painting?

Before you paint or stain, check to make sure the decking isn’t one of the capped styles.

Can you use Olympic Premium Deck Cleaner on non-capped decking?

Whichever paint or stain you pick, clean the deck thoroughly first. Use a deck cleaner that doesn’t have a warning on the label against use on non-capped composite de cking, because some cleaners for capped decks are too harsh for original-style composite decking. For its products, Trex specifically recommends Olympic Premium Deck Cleaner ($9.98 per gallon at Home Depot) and Expert Chemical’s Composite Deck Cleaner & Enhancer ($19.98 a gallon at expertchemicalinc.com). Do not use a pressure washer on non -capped composite decks. Rinse thoroughly with a hose, and let the decking dry.

When to throw away Trex pieces?

Throw your Trex pieces away when it is trash night.

How to repair scratches on wood?

Sand the scratch with a scratch repair pad or applicator tool. Apply light pressure to either the scratch pad or the applicator that came with the wax, and move the tool over the scratched spot very quickly. Use a back and forth motion for best results. Continue sanding until the scratch is the same level as the rest of the board.

How to get tabs out of a board?

Hit the tabs with moderate force about 3-5 times until they are flush with the board next to it. This gets the tabs out of the way, so you can easily fit the new board in place. If you are having trouble, use more force as you hit the tabs. ...

How to get wax off of a sandpaper?

Rub the applicator over the wax to remove any excess. Hold the applicator in between your index finger and thumb, and lightly move it back and forth across the wax. This scrapes off any extra wax.

How to get screw heads to show on one side?

Hammer the tabs on the sides so the screw heads only show on 1 side. There are several small metal tabs that held the old board in place. After the old board is out of the way, use a hammer to push the metal tabs downward. Hit the tabs with moderate force about 3-5 times until they are flush with the board next to it.

How to secure a board in place?

Use a pry bar to put the new board into place. To secure the board into its spot, put the tip if the pry bar in between the new board and the board next to it, and pull back on the pry bar with light pressure. Do this for both sides to wedge the board into place. ...

How to remove a board from a board?

Remove the center piece of wood from the rest of the board. Using your hands, lift up on the board from 1 side, and take it out of its spot. Place the board down on the neck next to you.