You can fix the sticky valve issue on your trumpet by oiling the valves regularly. Use a good quality valve oil such as Blue Juice to lubricate the valves. If you practice or play every day, you should oil the valves at least once a week.
What are the most common trumpet repairs?
From stuck mouthpieces and sticking valves to broken solder joints and stuck slides, here are a few of the most common repairs for trumpets. Not exclusive to the trumpet, stuck mouthpieces are also experienced by trombonists, saxophonists, and pretty much any other brass musician whose instrument uses a mouthpiece.
How do you fix a leaking trumpet valve?
Usually the result of normal wear and tear, air that leaks out between the valve and casing can affect your trumpet’s response. To reduce air leakage, you can try using a heavier valve oil. If that doesn’t work, take your trumpet into the shop for valve work or a full replacement.
What should I do if my trumpet doesn’t work?
If that doesn’t work, take your trumpet into the shop for valve work or a full replacement. Even if you come across replacement parts on sites like eBay or Craigslist, leave this repair to the professionals. Not only do they know exactly what they’re doing, but they have access to the right parts and tools.
Can trumpet mouthpieces get stuck?
Not exclusive to the trumpet, stuck mouthpieces are also experienced by trombonists, saxophonists, and pretty much any other brass musician whose instrument uses a mouthpiece. Since mouthpiece shanks go from narrow to wide, it’s easy for them to get stuck over time.
How much does it cost to repair a trumpet?
Brass Repair Pricing Prices do NOT include parts.InstrumentGeneral ServiceOverhaul Student InstrumentsTrumpet or Cornet$60-$90$550Single Horn (3 Valves)$90-$125$1,065Double Horn (4 Valves)$60-$90$1,54014 more rows
How much does it cost to repair a trumpet valve?
Lacquered Trumpets (Brass Color)ServiceEstimate of PriceValve Repairs$48.00 ea. for Pistons $60.00 ea. for RotorsFreeing Slides$45.00Water Key Corks$21.00Water Key$35.006 more rows
How do you weld a trumpet?
1:297:02Soldering On Musical Instruments Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipWay. You heat it up for a few seconds you can see when the solder melts. And then you click removeMoreWay. You heat it up for a few seconds you can see when the solder melts. And then you click remove the flame. And wipe it if you need to move the t-shirt material to a clean spot.
How do you fix an old trumpet?
3:3712:40Flea Market Cornet Repair and Restoration! - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst we take all the valves out because they have felt components that can't get wet then we removeMoreFirst we take all the valves out because they have felt components that can't get wet then we remove all the tuning slides in the mouthpiece. And dump them all in warm soapy water next.
Do dents affect trumpet sound?
We get asked time and time again, whether the dents in an instrument will affect its sound or tone. While of course dents takes away from the cosmetic value of the instrument, the answer to brass instruments is generally no, but that does depend on the size of the dent and on the position of the dent.
Can a bent trumpet be fixed?
Broken solder joints happen when a trumpet is twisted or dropped, and can be fixed by straightening whatever is bent. This is done by heating the joint with a gas torch until it's hot enough to melt the solder, but cool enough to prevent damage to the finish.
How do you repair a brass trumpet?
0:313:01Repairing Brass Instruments - YouTubeYouTubeStart of suggested clipEnd of suggested clipWork brass instruments are made from really really thin gauges of metal they're really softMoreWork brass instruments are made from really really thin gauges of metal they're really soft accidents happen and things get crushed dented dinged we'll use different tools to push up the dents.
How do you fix broken brass?
0:011:30Brass Repair Made Easy. And Copper. Bronze. Aluminum. In ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipVery little brass will heat up quickly and pull the heat emitted by the wire. Yes enough just enoughMoreVery little brass will heat up quickly and pull the heat emitted by the wire. Yes enough just enough heat. There. That's it we cleaned off the flux.
How do you solder brass?
6:2311:42How to Solder Brass - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen once as soon as you see that little puddle form and see it form around it remove the heat youMoreThen once as soon as you see that little puddle form and see it form around it remove the heat you have already in it if you continue to apply heat you will overheat it and then.
How much is an old trumpet worth?
There are pre-owned trumpets that can sell between $500-$1,000 or more, while others only sell for $100-$200, or even less.
Is it OK to put water in a trumpet?
2:246:29How To Clean a Trumpet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAreas time to fill the sink. You want to make sure that the water isn't too cold or too hot you'llMoreAreas time to fill the sink. You want to make sure that the water isn't too cold or too hot you'll want to aim for deep warm water let the water fill until it submerges the trumpet fully.
How do you clean and restore a trumpet?
0:272:29Best Way to Clean a Trumpet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd add a squirt or two of dish soap. The water should be lukewarm to the touch not too hot not tooMoreAnd add a squirt or two of dish soap. The water should be lukewarm to the touch not too hot not too cold lay a towel down in the tub so the trumpet doesn't dent on the hard surface.
How much does it cost to get a trumpet chemically cleaned?
How much does it cost to have a trumpet cleaned? If you want to get your trumpet chemically cleaned, expect pay between $50 for a simple flush and $145 to also get an ultrasonic cleaning. The ultrasonic cleaning will remove dirt without harming the metal and is therefore safer than using harsh chemicals.
How much does a trumpet cleaning cost?
Lacquered instruments are protected with a protective carnauba wax, and silver-plated instruments are completely hand-polished with the best tarnish-preventative silver polish available." Their price for that was $95 and I have seen about $20 for a spot to be resoldered.
What causes trumpet valves to stick?
The valves are too sticky. This can occur if the oil has caused debris to loosen in the trumpet valve case. It can be fixed by pulling the valve out and thoroughly wiping it with a clean cloth. It will then need to be oiled again before being re-inserted.
How often should I oil my trumpet valves?
The valves don't need to be oiled every time you play, but you should oil them two or three times a week or whenever they feel sluggish.
What is valve reconstruction?
Valve reconstruction makes your valve cylindrical in shape and fits perfectly in the valve housing so that your valve runs smoothly. The valves are then nickel-plated. You can also choose valve alignment, valve alignment ensures that the passages in the valve connect seamlessly to the valve pumps. This results in better control of the instrument.
What is the Adams Research Department's process of giving brass wind instruments an absolute added value?
In tradition with innovation, development and improvement, the Adams Research Department discovered a revolutionary process to give brass wind instruments an absolute added value: the instrument modification or treatment.
Can you silver plat a trumpet?
The same conditions apply to silver plating as for lacquering your trumpet. In addition to 'normal' silver plating, you can also opt for matt silver plating of the instrument.
Can you have your mouthpieces silver plated?
In addition to silver plating and lacquering your instrument, you can also have your mouthpieces silver- or gold plated. Contact us about the costs and possibilities. We can also make a plastic rim on the mouthpiece or a screw-on rim.
Can a metal saxophone be used on a baritone saxophone?
The technique can be applied to all metal-alloy instruments, all alto saxophones, soprano saxophones, tenor saxophones and baritone saxophones. Furthermore, the same technique can be applied to the necks of the saxophones.
Can you overhaul a trumpet at Adams Music Centre?
At Adams Music Centre you can overhaul your trumpet, we specify three categories of overhauling:
Can you lacquer a trumpet?
Please note, for the lacquering of the trumpet, the instrument must be undented In case we have to fix this, we have to calculate a surcharge for these actions. For lacquering your instrument you can choose from: high-gloss lacquer (colorless), a matt lacquer, gold lacquer, vintage look lacquer (antique lacquer), for other colors or special requests please contact us.
Why does my trumpet turn dark?
This is caused by a natural reaction between the silver metal and the sulphur content and oxygen in air and perspiration .
What does it mean when a trumpet pops?
A popping sound indicates that you are not removing the slide properly. Extract the moisture from the slide which you have removed. Remove the moisture from the body of the trumpet as well, via the water key.
How to fix a trumpet that doesn't slide out?
If the valve doesn’t slide out smoothly as usual, turn the trumpet upside down, remove the bottom cap and run warm water through the bottom of the casing for a couple minutes.
What to do if trumpet valves stick?
A simple oiling or cleaning is usually all it takes to resolve these. But if these don’t work, and you discover structural damage that’s causing a valve to stick, I hope you’ll consider whether you can fix this on your own or had better bring the trumpet to a repair shop.
What causes trumpet valve sticking?
A valve can stick for one or more of several reasons. Here are the usual culprits listed roughly by in order by most common to least common:
Why does my trumpet valve rubbing against the inside?
This often happens when a trumpet player removes a valve for cleaning and drops it on a hard surface. Hold the valve piston sideways against a flat surface with light behind it.
How to slow down a trumpet valve?
Oil the valve. Turn the trumpet upside down and add a few drops of valve oil into the valve casing through the hole in the bottom. Any more than 3-4 drops of oil can actually slow the valve response. So don’t use too much.
Why does my trumpet have a stuck valve?
If you find your trumpet has one or more stuck valves, chances are it’s due to dryness, inadequate valve oil or foreign material. These three causes account for the vast majority of sticking valves.
What is the irony of trumpet repairs?
The irony is that the trumpet then needs repairs that are several times more expensive than the original problem would have been to fix had the owner brought it to a professional from the start.
Trumpet Overhaul
Trumpet Repair
- In addition to revising the trumpet, we also carry out repairs. Dent removal in bells happens here daily. Have you dropped or bumped your trumpet? Please visit us with your trumpet and we will have it repaired.
Trumpet Lacquering
- Do you have a lot of scratches on your trumpet and do you want to lacquer them? This is of course also possible with us. Please note, for the lacquering of the trumpet, the instrument must be undented In case we have to fix this, we have to calculate a surcharge for these actions. For lacquering your instrument you can choose from: high-gloss lacquer (colorless), a matt lacquer, …
Silver Plating Your Trumpet
- The same conditions apply to silver plating as for lacquering your trumpet. In addition to 'normal' silver plating, you can also opt for matt silver plating of the instrument.
Mouthpiece Adjustments
- In addition to silver plating and lacquering your instrument, you can also have your mouthpieces silver- or gold plated. Contact us about the costs and possibilities. We can also make a plastic rim on the mouthpiece or a screw-on rim.
Valve Reconstruction and Valve Alignment
- Valve reconstruction makes your valve cylindrical in shape and fits perfectly in the valve housing so that your valve runs smoothly. The valves are then nickel-plated. You can also choose valve alignment, valve alignment ensures that the passages in the valve connect seamlessly to the valve pumps. This results in better control of the instrument.
Supports and Stands
- If you need extra support while playing your trumpet, you can request us to develop a personalized support to promote your playing pleasure.
Modifications
- For your trumpet we can also make the following adjustments to your instrument: 1. Shorten main tuning pump 2. Install additional water valve 3. Install additional valve (on request) 4. Conversion from right-handed to left-handed (on request) 5. Make trumpet bell and mouthpiece tube interchangeable (including connectors, excluding silver plating or lacquer)
Modification Technique
- In tradition with innovation, development and improvement, the Adams Research Department discovered a revolutionary process to give brass wind instruments an absolute added value: the instrument modification or treatment. In the manufacture of copper instruments, stresses arise from forcing, bending and soldering. The alloy of the instrument is constantly under stress durin…