how to repair usb flash drive not recognized

[Solution] Unrecognized USB Drive Fix

1. Right-click on the USB drive's partition in Disk Management.
2. Select "Format" from the right-click menu.
3. Select "FAT32" as the file system.
4. Uncheck the "Perform a quick format" box.

Full Answer

Why my computer is not recognizing the USB drive?

• Open Start.
• Search for Create and format hard disk partitions.
• Click on the top result to open Disk Management.
• If the drive is trying to use an existing drive letter, right-click the volume and select the Change Drive Letter and Paths option.
• Click the Change button.
• Select the Assign the following drive letter option.

More items...

How to fix Windows 10 doesn't recognize USB?

1. How to fix a Windows 10 doesn't recognize USB Port
2. Solution 1 – Check Power Management for USB root Hub. One way to fix a Windows 10 problem of this spec is to tweak the power management structure of your ...
3. Solution 2 – Install drivers for Generic USB Hub. ...
4. Solution 3 – Change USB Selective Suspend Settings. ...
5. Solution 4 – Reconnect your USB devices. ...

How to repair unrecognized USB?

Part 1 Part 1 of 6: Performing Basis Troubleshooting

1. Check the USB drive for damage. Check to make sure the USB connector isn't bent or missing parts. ...
2. Plug the USB drive into another USB port. There could be a hardware problem with that particular USB port, so try plugging it into another USB port on your ...
3. Connect the drive to another computer. ...
4. Shut down and unplug your computer. ...

More items...

Why is my flash drive not detected?

Part 2: How to Fix USB Flash Drive Not Working in Windows

1. Check Your USB Ports. If your USB ports are not functioning properly, Windows won't detect your USB flash drive. ...
2. Update Your Device Drivers. If your device drivers are outdated, Windows computers won't recognize USB. ...
3. Change Power Management Settings. ...
4. Updating Windows System. ...
5. Format Your USB Drive. ...

How do I fix an unrecognized USB flash drive?

How to Quickly Fix a USB Flash Drive That Is Not RecognizedMethod #1: Isolate the Problem.Method #2: Connect Directly to the Motherboard.Method #3: Clean the USB Contact Points.Method #4: Hardware Troubleshooter.Method #5: Update or Reinstall the USB Drivers.Method #6: Reinstall USB Controllers.

How do I force a USB to recognize?

Windows cannot detect my new USB device. What do I do?Open Device Manager and then disconnect the USB device from your computer. Wait a few moments and then reconnect the device. ... Connect the USB device to another USB port.Connect the USB device to another computer.Update the USB device drivers.

Why won't USB ports recognize devices?

Sometimes, a simple reboot can fix an unrecognized USB device. Plug your USB device out, wait for a few minutes, then restart your laptop. Plug your USB device back in again to see if it works. Luckily, it will resolve your problem all at once, and you don't need to worry about it anymore.

How do I get Windows 10 to recognize a USB device?

How to Fix a USB Device Problem in Windows 10Restart your Windows 10 device. ... Turn your USB device on. ... Check the USB device's battery. ... Wait until your Windows 10 computer is turned on. ... Update Windows 10. ... Make sure that the USB device is meant to connect to a Windows 10 computer or tablet. ... Troubleshoot.More items...•

How to physically open a flash drive?

Physically opening a USB flash drive is a careful process, as you risk damaging the internal components. A typical USB has a back plate and a front...

How do I get my computer to recognize a USB device?

First, connect the USB to a port on your motherboard rather than your computer case. If your device still isn’t appearing, you can try running the...

Why is my USB not showing up on the computer?

There are a number of reasons why your USB may not be showing up on your computer. It could be as simple as a faulty USB port. To ensure your USB i...

How to Recover Data From USB Not Recognized

Even if your USB drive doesn’t show up in Windows Explorer, your computer may still be registering it. In fact, as long as it’s visible in Disk Management and showing the correct size, you will be able to recover data from a flash drive that’s not recognized. If it’s not visible in Disk Management, try to make it readable first.

How to Format an Unrecognized USB

Formatting a USB involves refreshing the existing file system or adding a new one. This process will delete any data that resides on the USB. Formatting has always been a quick and effective method to fix USB flash drives if not detected, as it’s basically restoring it to factory settings.

How to Make a USB Readable

If your USB isn’t visible with the correct size in Disk Management, recovery won’t be possible. But, there are a few solutions you can try to make it readable. The below methods will help you understand how to fix a USB flash drive that is not recognized.

How Can I Fix my Flash Drive Not Recognized?

Question: " My USB flash drive is not recognized when I plug it to the computer. What causes such a problem to happen? Is my USB drive got broken? How to fix the flash drive not recognized issue? Also, can I recover data from the USB flash drive not recognized? "

Why won't my computer recognize my flash drive?

USB Formatting Issue : This is the most probable reason your computer could not detect your flash drive. The inability to format flash drive properly before the first use could cause problems later on. Driver Issue: The drivers may not be available, corrupted, or outdated which would make the flash drive not Recognized.

How to check if flash drive is working?

Way 1: Scan Flash Drive to Find the Issue. Plug the flash drive into your USB port. Go to My Computer and right-click on the flash drive. Open the Properties. Open the Tools tab and click Check now "¦. It may take some time to complete the scan. Once finished, it will tell you what the flash drive's problem is.

What to do if you find something missing on a flash drive?

You should also check if there is any accidental data loss from the drive. Should you find things missing, use a flash drive data recovery tool to help you recover loss documents do this immediately before it is overwritten by new data.

How to format a flash drive?

Right-click on the flash drive and click on Format"¦, the Format window will pop up.

How to update USB driver software?

Expand the menu and right-click on the Generic USB Hub. Click on Update Driver Software"¦

Where to find flash drives that need to be fixed?

You will be able to find the flash drives that need to be fixed in the left panel.

Why is my USB flash drive not showing?

The most likely reason the USB flash drive doesn't display is the USB driver problem. If the driver is too outdated, damaged or missing, your device finds no way to communicate with the flash drive, so it can’t display the drive for you (the flash drive is not recognized).

Why is my USB not flashing?

The USB indicator does not flash or its state is abnormal. The system fails to boot as usual after the USB device was connected to the computer . The content in USB device can't be accessed or the access speed is much slower than before. You should provide a separate external power supply to the USB device.

Why isn't my Xbox 360 detecting my USB flash drive?

If the USB flash drive is used on Xbox 360 when you find flash drive can't be recognized, there's a special reason why it is not detected by Xbox 360: the first partition of USB flash drive is not a FAT32 partition.

How to convert NTFS to FAT32?

Situation one: if the USB drive is formatted as NTFS, you need to convert NTFS to FAT32 by following steps: Run MiniTool Partition Wizard. Right click on your USB flash drive. Choose Convert NTFS to FAT from the right-click menu. Press Apply button in the upper left corner and choose Yes to apply changes.

How to find USB drive in Windows Explorer?

Right click on the Start button in the lower left corner of the PC screen. Choose Disk Management from the context menu. Look for your USB flash drive. The USB device would appear in Disk Management but not in Windows Explorer when the USB device has no drive letter or it becomes unallocated.

Why is my USB not showing in Windows Explorer?

You should open Windows Disk Management to check. If your USB device is not recognized but appears & becomes unallocated space in Disk Management , the outdated USB driver should be blamed for.

What happens when your motherboard is turned off?

When the motherboard gets powered off, all hardware (including the USB ports) connected to the computer will be cut off. You should wait a few minutes to re-plug the power supply; then, the USB ports will be rebooted and the drivers will be reloaded, so your USB flash drive may be recognized. Shut down your computer.

Why is my USB not recognized?

There are many possible reasons for your USB device to not be recognized. The USB device itself could be damaged, there could be something wrong with the USB port, or you could be experiencing driver issues , just to give a few examples.

What does it mean when a USB device is not recognized?

The main symptom of the USB device not recognized error is the following pop-up message: The pop-up message may disappear on its own after a while, so it’s possible to miss it if you’re not paying attention. However, you definitely won’t miss the other main symptom of the USB device not recognized error: your USB device not being accessible.

How to uninstall USB driver?

Here’s what you need to do: Open the Start menu, type Device Manager in the Search box, and select Device Manager. Expand the Disk drives section. Right-click on your USB device and select the Uninstall device option.

What is USB controller?

The communication between USB devices and your computer is controlled by the so-called USB controllers, which are kind of like air traffic control specialists, managing the complex flows of data to ensure that it ends up in the right destination. Reinstalling your USB controllers can fix unknown USB device errors by replacing an unstable or corrupted controller with a working one.

How to find device manager?

Open the Start menu, type Device Manager in the Search box, and select Device Manager.

How to update Windows 10?

Open the Start menu, type Windows Update, and select the Windows Update option.

Do motherboards need drivers?

Just like all other hardware devices, your motherboard requires drivers to work correctly. If you haven’t done so in a while, you should check whether you’re using the latest chipset drivers available by going to the official website of the manufacturer of your motherboard. If a newer chipset driver is available, download it to your computer and install it just like any other driver.

Why is my USB drive not recognized?

There are a variety of factors that could be causing your USB drive to not be recognized by your computer. It could be a problem with the hardware or a corrupt partition. It may have been formatted on a non-compatible computer.

Why is my USB drive not listed in Disk Management?

If your USB drive isn't listed in Disk Management, then there is likely a hardware problem with either the USB drive or your USB port. Click here for detailed instructions on repairing a physically broken USB drive.

How to fix a motherboard that won't turn on?

Shut down and unplug your computer. Sometimes your motherboard needs to be completely rebooted. To do this, you will need to shut down your computer and unplug it. This will prevent the motherboard from getting any standby power. Let it sit for several minutes and then reconnect your computer and start it back up. See if it is able to recognize your USB drive. You may need to update your USB drivers or reformat the USB drive.

Why won't my USB drive work on my computer?

If the USB drive works on another computer but doesn't work in any of your USB ports, then there is something wrong with your computer's hardware or USB drivers. Also, check what type of computer the USB drive was formatted on. Computers running a different operating system or different bit processor may format the drive in a way that is not compatible with other computer types.

How to get a USB drive to work?

You can use any functioning USB port on your computer. If your drive's partition is unallocated or still can't be seen even after assigning a letter, formatting the drive may be your only option to get it working.

What is a fat 32 USB drive?

FAT 32 is an older, universal file system that is compatible with most devices. Select this option if you want the USB drive to have the widest compatibility amongst a wide variety of devices and you have no files larger than 4 GB. The USB drive also can't be any larger than 8 TB.

How to clean a USB connector?

If you notice any corrosion or gunk on the USB connector, you can try cleaning it using some electrical contact cleaner. It's inexpensive and available at most stores that sell electronic equipment.

Why is my USB flash drive not detected?

USB flash drive not detected occurs can be a result of a corrupted registry entry. If so, you need to remove the bad registry key. 1. Run open box, input “ regedit ” and hit Enter to open Registry Editor. 2.

Why won't my USB flash drive appear in BIOS?

If you have disabled the USB Interface in BISO to protect your computer, USB flash drive won’t appear. In such a case, you can enter BIOS settings to enable USB Device. Then, restart your computer and see if the USB flash drive is detected.

How to change the path of a USB flash drive?

At this time, it is simple to solve this issue by following the steps below: 1. Right-click the USB flash drive partition and select “ Change Drive Letter and Path…. ”. 2. In the pop-up window, click “ Add ” and choose a proper drive letter. Then, click “ OK ”. 3.

Why is my flash drive not showing up?

USB flash drive not showing up may be out of broken USB port. Thus, you can remove USB flash drive and insert it to another USB port to see whether it is detected and showing up in Windows 10 File Explorer.

How to update USB drive?

To update USB drives for your flash drive, press “ Windows ” + “ R ” simultaneously, input “ devmgmt.msc ” and hit “ Enter ” key to access Device Manager. In Device Manager, expand Universal Serial Bus controllers (usually the last one), right-click Generic USB Hub and choose Update Driver Software....

How to make all data on USB drive gone?

1. Install AOMEI Partition Assistant Standard. Run it, right-click the flash drive partition that you need to format, and choose “ Format Partition ”. 2. Among the listed file system, choose an appropriate one. Then, click “ OK ” button. 3.