Antique Furniture Restoration after Water Damage
- Drying. Move the antique furniture to the prepared room (we wrote about the temperature regime and the permissible humidity above).
- Disassembly. Before restoration, all removable furniture parts must be carefully disassembled. ...
- Processing. ...
- Assembly. ...
Full Answer
How to repair water damaged wood in 7 simple steps?
- Start to swell up from moisture and deform in structure/shape.
- The edges will start to swell up the most and with time will start to crumble and fall apart.
- Waterlogged Particle board can start to sag under the weight which can be extremely unsafe.
How do you fix water damaged wood?
To repair water damaged wood using auto body filler:
- Remove any rotten wood from the water damage wood.
- Mix up auto filler putty with hardening cream following the directions on the container.
- Fill the hole before the filler has time to set.
- Apply additional coats of filler if needed.
- Sand the filler flush with the wood surface.
- Prime and paint over the filler.
How to restore furniture with water damage?
Steps to Take
- Clean up all the water.
- Get a wet rag.
- Cover the swollen furniture.
- Preheat the iron to a low temperature.
- Once heated, hold the iron down for a couple of seconds on top of the rag.
- Don’t hold it in one place for long as it could damage your wood.
- Remove the rag and inspect the wood bubble.
- If the bubble is still there, you might want to keep ironing. ...
How do you remove water marks from wood furniture?
You will need:
- Clean cloths
- Sandpaper
- Rubber gloves
- Bicarbonate of soda
- Salt
- White vinegar
- Non-gel toothpaste
- Petroleum jelly
- Bleach
- Water
What does water damage look like on wood?
When water damage only impacts the surface (finish) layer, the mark will appear as a white, cloudy spot. If water seeps deeper, though, that mark can turn darker and seep into the actual wood surface. Often, surface-level damage can be repaired for a flawless patina.
Can a wooden heirloom be restored?
If your wooden heirloom is made from solid wood or wood veneer over solid wood construction, it can often withstand restoration work. Even if the furniture has loose joints from deteriorated glue or water-damaged joinery, our skilled technicians can repair and stabilize it for years to come. Sometimes, the value of your antique will actually ...
Can water damage furniture?
And water can wreak havoc on furniture legs, veneered pieces and door panels.
How to dry wood furniture after it has been soaked in water?
When a piece of wood furniture has been soaked in water, the very first thing to do is to let it dry. Place it in a room with warm temperature and good air circulation. You may want to turn on the heating and the fans. Alternatively, if the weather permits, you can leave the furniture to dry outside.
What do you need to clean furniture after a flood?
Moisturizer. What You'll Need. Toothpaste. Baking soda. Bleach. Veneer glue. Syringe. Moisturizer. Water damage to furniture as a result of flood or weather is not always as bad as it seems.
How to repair a warped veneer?
To repair the damage, you can soak the veneer with a moisturizer until it lies down flat again. Wipe it dry and clean. Fill a syringe with veneer glue and stick the needle between the veneer and the body of the furniture. Empty the syringe slowly. Remove it and place a wood block on top of the veneer. Wait for the glue to dry. Follow the manufacturer’s recommendations for the waiting period and remove the block.
Why is my furniture black?
Black spots on your furniture indicate that water has seeped through the finish into the wood, leading to the formation of mildew. In this case, you will have to remove the finish, clean the mildew with a bleach solution, and coat it with a new layer of finish.
What happens if you keep black water on your carpet?
If you keep the carpet, you risk having a breeding ground for dangerous bacteria and allergens right in the middle of your household.
How to get rid of white spots on furniture?
If white spots have formed on the furniture, mix a solution of equal parts toothpaste and baking soda. Dip a wet cloth in the solution, and rub it both in and around the spots. Polish the area with a dry piece of cotton fabric.
Can you leave furniture outside?
Alternatively, if the weather permits, you can leave the furniture to dry outside. Make sure the temperature is right. If it is too cold, the wood piece will dry too slowly and mold will form. If it is too hot, cracks will form in the furniture.
4 Tips for Evaluating A Damaged Antique
When it comes to antique repair and restoration, Furniture Medic technicians have seen it all. For actual appraisal of value, we recommend consulting with a certified appraiser. But if you love a piece of furniture that shows a little (or a lot of) wear and tear, here are pro tips for an initial evaluation.
Our Antique Furniture Repair Process
Your beloved antique furniture piece is treated with care from the moment we evaluate it to the time it returns to your home. Depending on the size of the piece and the type of damage we’re repairing, we’ll often move it to an off-site location.
Find an Antique Repair Expert Near You
Find your local Furniture Medic technician to learn more about your antique furniture repair options.
How to get paint off furniture without damaging finish?
Easily scrape away old paint from your furniture without damaging the finish by using a delicate paint scrubber. A razor blade works well as a home-made paint scrubber or you can buy one in your local DiY store.
What to do if furniture is missing?
If a part of the furniture is missing then it is always best to consult a professional to have it patched. Only craftsmanship and keen attention to detail will result in a satisfying repair.
Can wax filler stick be used on furniture?
You can use wax filler sticks to repair tiny cracks or small holes in your furniture. They're very easy to use and if you take the time to build-up your layers carefully and match the colours accurately the resulting repair can be almost impossible to spot.
