how to repair windows 10 boot problem

1. Start the system to the installation media for the installed version of Windows. For more information, see Create installation media for Windows.
2. On the Install Windows screen, select Next > Repair your computer.
3. On the System Recovery Options screen, select Next > Command Prompt.
4. After Startup Repair, select Shutdown, then turn on your PC to see if Windows can boot properly.

How to fix Windows 10 not booting?

Windows 10 Not Booting After Update

• Revert Installed Updates. Wait patiently for the Windows 10 booting procedure to begin after turning on your machine. ...
• Recover Using Startup Repair. Windows 10 will not start can be fixed by running automatic startup repair in the recovery environment.
• Boot in Safe Mode. ...
• Checking For Errors Using Command Prompt. ...
• Check Errors in Hard Drive. ...

Why wont my Windows 10 boot?

Windows 10 Won’t Boot?

1. Unplug external storage devices. It’s possible that your BIOS is configured to read external storage devices, according to the BIOS boot order.
2. Check your HDD or SSD. If your HDD or SSD is not properly plugged in, your computer won’t be able to read the storage device and start your operating ...
3. Check your battery. ...
4. Start Windows 10 in Safe Mode. ...

More items...

What you should do if Windows fails to start?

What to do when “Windows fails to start” issue appears?

• ▌ Solution 1. Remove any hardware you recently installed. ...
• ▌ Solution 2. Verify your PC detects the boot disk and is booting from it. ...
• ▌ Solution 3. Use the Last Known Good Configuration to start Windows. ...
• ▌ Solution 4. Launch Startup Repair. ...
• ▌ Solution 5. Fix “Windows failed to start” with BCDEDIT command. ...
• ▌ Solution 6. Fix damaged MBR. ...

What to do when Windows won't boot?

Windows 10 Won't Boot? 12 Fixes to Get Your PC Running Again Try Windows Safe Mode Check Your Battery Unplug All Your USB Devices Turn Off Fast Boot Try a Malware Scan Boot to the Command Prompt Interface Use System Restore or Startup Repair Reassign Your Drive Letter Dodge the Windows 10 Bootloader Try a Third-Party Utility More items

What are the 4 ways to fix Windows 10 startup?

Four of the top approaches for solving Windows 10 boot problems are launching the Startup Repair tool, repairing the Master Boot Record (MBR), scanning the system for corrupt or missing files, and running the Deployment Image Servicing and Management (DISM) tool.

How do I fix a corrupted boot?

2:234:45How To Fix Master Boot Record Is Corrupted In Windows 10 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd again turn off your machine try and boot to your desktop. That should fix it if it doesn't againMoreAnd again turn off your machine try and boot to your desktop. That should fix it if it doesn't again come into this menu. Click on troubleshoot Advanced Options click on startup repair.

How do I repair corrupted Windows 10?

Use the System File Checker tool to repair missing or corrupted system filesOpen an elevated command prompt. ... If you are running Windows 10, Windows 8.1 or Windows 8, first run the inbox Deployment Image Servicing and Management (DISM) tool prior to running the System File Checker.

How do I run Windows Startup Repair?

Hold the Shift key down at the Windows sign-in screen and press the Power button at the same time.Continue holding the Shift key, then click Restart.Once the PC restarts, it'll present a screen with a few options. ... From here, click Advanced options.In the Advanced options menu, choose Startup Repair.More items...•

Does Windows 10 have a repair tool?

Answer: Yes, Windows 10 does have a built-in repair tool that helps you troubleshoot typical PC issues.

How do I repair Windows 10 with bootable USB?

The steps involved to repair Windows 11/10 installation using the bootable Installation USB or DVD media are:Download Windows ISO.Create Bootable USB or DVD drive.Boot from the media and choose “Repair your computer.”Under Advanced troubleshooting, choose Startup Repair.

How do I repair and reinstall Windows 10?

Here's how:Navigate to the Windows 10 Advanced Startup Options menu. ... Once your computer has booted, select Troubleshoot.And then you'll need to click Advanced options.Click Startup Repair.Complete step 1 from the previous method to get to Windows 10's Advanced Startup Options menu.Click System Restore.More items...•

Can I repair Windows 10 without losing data?

By using Repair Install, you can choose to install Windows 10 while keeping all personal files, apps and settings, keeping personal files only, or keeping nothing. By using Reset This PC, you can do a fresh install to reset Windows 10 and keep personal files, or remove everything.

How do I fix Windows boot manager without disk?

Reboot your PC, and each time you see the Windows logo while booting, turn your PC off by hard shutdown. Repeat this 3 times & you should enter the Windows Recovery Environment (WRE) to do System Restore. If that won't work, go to Advanced options > select "Automatic Repair".

How do I fix boot manager?

ResolutionInsert the Windows installation disc into the disc drive, and then start the computer.Press a key when the message Press any key to boot from CD or DVD appears. ... Select a language, a time and a currency, a keyboard or input method, and then select Next.Select Repair your computer.More items...

How do I repair Windows 10 without a disk?

How do I reinstall Windows without a disk?Go to "Start" > "Settings" > "Update & Security" > "Recovery".Under "Reset this PC option", tap "Get Started".Choose "Remove everything" and then choose to "Remove files and clean the drive".Finally, click "Reset" to begin reinstalling Windows 10.

How do I fix boot device not found?

Turn off the computer and wait five seconds. Press the power button to start the computer and repeatedly press the f10 key to enter the BIOS setup menu. On the BIOS Setup screen, press f9 to select and load the BIOS Setup Default settings. Press f10 to Save and Exit.

Why won't my computer start up Windows 10?

The cause of Windows 10 not booting. Very often, users on the Internet complain about their Windows 10 computers won’t start as usual. Sometimes, it shows a blue screen or a black screen, or a message of incorrect loading and a boot failure error.

How to fix a computer that won't turn on?

After entering the Windows Setup screen, choose the language, time, and keyboard or input method and hit “Next” to proceed. 2. Click on “Repair your computer” on the lower left side of the screen. 3. Then, you’ll be navigated to the advanced startup screen.

How to boot from USB drive?

Be sure to set up your BIOS to let the machine boot from the USB drive. 1. After booting into setup, choose “Troubleshoot” > “Advanced options” > “Command Prompt”. 2. Once you’ve Command Prompt up on your screen, you must issue a set of commands to find and solve the issues that prevent your PC from normal boot. 3.

How to make your screen black on a PC?

1. Start your PC and then, when you see the startup logo, hold down the power button until the screen becomes black.

Can I rebuild my MBR?

If you think method 1 is too complex and are looking for an easier way to fix boot Windows 10, maybe it’s time to rebuild MBR with some third-party app once for all. AOMEI Partition Assistant Standard, as disk manager freeware, is able to manage all your disks and partitions on your PC with ease. Features including GPT-MBR conversion and damaged hard drive fixing are also available. Most importantly, if your system doesn’t successfully boot, you can use it to rebuild MBR to make it normal .

What is a startup repair tool?

The Startup Repair tool automatically fixes many common problems. The tool also lets you quickly diagnose and repair more complex startup problems. When the computer detects a startup problem, the computer starts the Startup Repair tool. When the tool starts, it performs diagnostics. These diagnostics include analyzing startup log files to determine the cause of the problem. When the Startup Repair tool determines the cause, the tool tries to fix the problem automatically.

How to troubleshoot a service?

To troubleshoot problems that affect services, do a clean boot by using System Configuration (msconfig). Select Selective startup to test the services one at a time to determine which one is causing the problem. If you cannot find the cause, try including system services. However, in most cases, the problematic service is third-party.

What to do if Windows cannot load system registry hive?

If Windows cannot load the system registry hive into memory, you must restore the system hive. To do this, use the Windows Recovery Environment or use Emergency Repair Disk (ERD) to copy the files from the C:WindowsSystem32configRegBack to C:WindowsSystem32config.

What to do if there are any external peripherals connected to the computer?

If there are any external peripherals connected to the computer, disconnect them .

What happens if you modify the registry incorrectly?

Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

Does Windows 10 automatically back up the registry?

Starting in Windows 10, version 1803, Windows no longer automatically backs up the system registry to the RegBack folder.This change is by design, and is intended to help reduce the overall disk footprint size of Windows. To recover a system with a corrupt registry hive, Microsoft recommends that you use a system restore point. For more details, check this article.

Does Fixmbr overwrite master boot code?

Running BOOTREC together with Fixmbr overwrites only the master boot code. If the corruption in the MBR affects the partition table, running Fixmbr may not fix the problem.

What is bootrec.exe?

Bootrec.exe tool is used to troubleshoot and fix boot problems in the Windows Recovery Environment. Problems in a master boot record, a boot sector, and a boot configuration data store can be fixed by this tool.

How to access system restore command prompt?

To access the System Restore with Command Prompt, run Command Prompt from Windows recovery mode first. Then type rstrui.exeand hit Enter.

How to open command prompt without desktop?

There is one way to open Command Prompt without entering the Windows desktop. Here are steps to do that when the computer fails to boot. Step 1: Reboot your computer. When the computer shows the Windows icon, press F8 constantly to show the "Windows Setup".

What is the command line for Windows 10?

The command line we'll execute first is the system file check (SFC). SFC can automatically scan for corrupted and missing system files, and repair or replace them in Windows 10.

Where are startup folders located?

Since the user’s startup folders are in the system drive, so generally speaking, we just need to check the C drive.

Can Bootrec fix boot problems?

Please note that even if the Bootrec.exe tool can fix most boot problems, it still could not solve every possible error in a computer startup. Therefore, when it couldn’t work, proceed to the next one.

How to repair Windows 10?

To repair Windows 10 boot, you can use the Startup Repair tool. To access Windows 10 recovery environment, turn your computer on and off three times. While booting, ensure you turn off the computer when you see the Windows logo. After the third time, Windows 10 will boot into diagnostics mode. Click "Advanced options" when the recovery screen appears. Then, choose "Startup Repair" and follow the on-screen institutions to do it.

Why does Windows 10 not boot?

Sometimes, Windows 10 fails to boot because there is a problem with the master boot record. In these cases, the master boot record needs to be repaired to restart and run. When you want to do Windows 10 startup repair, you can use the Windows 10 recovery environment includes an automatic option to accomplish this task.

How to repair Windows 10 after third time?

After the third time, Windows 10 will boot into diagnostics mode. Click "Advanced options" when the recovery screen appears. Then, choose "Startup Repair" and follow the on-screen institutions to do it.

What is Windows auto repair?

Windows Automatic Repair is a built-in tool for users to apply and try to fix some normal errors on Windows PC. And you may also try this method to repair Windows 10, 8 or 7 UEFI/EFI boot error:

When to enter exit in a repair?

Enter exit when the repair process completes.

How to run diskpart command?

Choose Command Prompt from the menu and use the dispart command lines: Type and run the command: diskpart. Type and run the command: sel disk 0. Type and run the command: list vol

What to do when Windows 10 cannot boot?

When Windows 10 cannot boot normally, you can use Startup Repair to fix Windows loading problems.

How to fix corrupted files in Windows 10?

If you can boot Windows 10 or safe mode, you can type “cmd” in the search box. 2. Right click on the result Command Prompt and select Run as Administrator. 3. Type “sfc /scannow” (without quotes) and press Enter.

How to restore Windows 10 to factory settings?

1. Boot into Windows 10 recovery mode and navigate to Advanced Option menu. 2. Select the option System Restore. 3. Select your username and enter your password. 4. Select a restore point from the list, and click Next to start the System Restore. Before you start the System Restore, you can scan for affected programs.

How to reset a Windows 10 computer?

You can go to Settings > Update&Security >Recovery > Reset this PC.

How to refresh Windows 10?

If you want to refresh Windows 10 and install Windows updates, you can run a command “systemreset -cleanpc” from an elevated command prompt .

How to install Windows 10 on a virtual drive?

1. Download the latest Windows 10 installation ISO file and save it on your hard drive. 2. Double-click on this ISO file to mount it as a virtual drive. (Windows 7 or older version of Windows will have to use third party tool to mount an ISO file) 3. Locate the Setup.exe file and double-click to run it.

Can you run rstrui.exe before a system restore?

On some cases, only the option Command Prompt is available , then you can type ”rstrui.exe” (without quotes to bring out System Restore.

Why won't my computer boot up Windows 10?

Unfortunately, no precise cause has been found yet. It could be the work of a malicious software; an abrupt shutdown; or sometimes, even updates can lead to this kind of Windows startup problem.

How long does it take for a startup to fix?

Follow the instructions to launch Startup Repair. If everything goes fine, your Windows startup problems should be resolved in a few minutes.

Why is Windows updating important?

New security loopholes also keep popping up into existence every day; updates are crucial to stay safe against such threats.

How to force shut down a PC?

To get started, power up your PC and while the Windows is still loading up, press the power button and hold it for at least ten seconds ; this will force your Windows to shut down.

How to keep my files on my computer?

Once in, select Troubleshoot > Reset this PC > Keep my files. This way, although your system files will be reset and reinstalled, you’ll be able to keep your personal files intact.