how to repair windows 8 in safe mode

Boot into safe mode during startup

• Turn on the computer.
• Press and hold the SHIFT key and tap the F8 key several times until you enter the Recovery Mode menu. ...
• In the Recovery Mode menu, select See advanced repair options. ...
• Choose the Troubleshoot option. ...
• Select the Advanced options button. ...
• Select the Windows Start-up Settings button. ...
• Click the Restart button. ...

More items...

Full Answer

How to easily enter safe mode in Windows 8?

• On the Services tab of System Configuration, select Hide all Microsoft services, and then select Disable all.
• On the Startup tab of System Configuration, select Open Task Manager.
• Under Startup in Task Manager, for each startup item, select the item and then select Disable.
• Close Task Manager.
• On the Startup tab of System Configuration, select OK . ...

How to activate safe mode?

Enable Safe Mode. At Startup Settings, click/tap the "Restart" button. Your screen will blank out for a few minutes while your device restarts and enters the Startup Settings screen. The Startup Settings screen will present you with options numbered 1–9. Three of these options will activate safe mode:

How can I force my computer into safe mode?

start windows booting. as soon as it starting to load windows force power off your machine (hold power button in) repeat this about 4 or 5 times, windows will then pop up with a message about something went wrong and windows is unable to be loaded, then it should offer the safe mode options.

How do you start your PC in safe mode?

• Use the WIN+R keyboard shortcut to open the Run dialog box
• Type msconfig and then press OK.
• From the Boot tab, choose Safe boot .
• Select the radio button next to the mode you want to enter: Minimal starts the normal Safe Mode. ...
• Select OK .
• Choose Restart if you see a prompt to restart, otherwise restart manually through the Start menu.

How do I repair Windows in Safe Mode?

How to Fix Your PC in Safe ModeScan for Malware: Use your antivirus application to scan for malware and remove it in Safe Mode. ... Run System Restore: If your computer was recently working fine but it's now unstable, you can use System Restore to restore its system state to the earlier, known-good configuration.More items...•

How do I get to repair mode in Windows 8?

While the computer is booting up the trick is to hold the Shift button and keep pressing the F8 key, this will sometimes boot you into the new advanced “recovery mode”, where you can choose to see advanced repair options.

How do I start an automatic repair in Safe Mode?

Under the Windows Setup window, choose "Next" Navigate to "Repair your computer" > "Troubleshoot" > "Advanced options" > "Startup Settings” Choose the Safe Mode (Enable Safe Mode, Enable Safe Mode with Networking, and Enable Safe Mode with Command Prompt) that meets your needs.

How do I fix automatic repair on Windows 8?

Fixes for Automatic Repair Loop in Windows 8Insert the disc and reboot the system.Press any key to boot from the DVD.Choose your keyboard layout.Click Repair your computer at the Install now screen.Click Troubleshoot.Click Advanced options.Click Startup Settings.Click Restart.More items...

How do I repair Windows 8 without a disk?

0:061:33Windows 8.1 - How to Enter Recovery if Windows Will Not Boot - YouTubeYouTubeStart of suggested clipEnd of suggested clipOptions and then click troubleshoot. You have two Recovery Options refresh. Your PC may help getMoreOptions and then click troubleshoot. You have two Recovery Options refresh. Your PC may help get your computer running again without causing you to lose any of your files.

How do I restore my Windows 8.1 operating system?

SolutionTo open System Restore: • Open Control Panel (view by large icons). Click Recovery, then click Open System Restore to open System Restore. Proceed to step 2. • ... Click Next.Choose a restore point and click Next.Click the Finish button.Click Yes to confirm.

Why is F8 not working for Safe Mode?

The reason is that Microsoft has reduced the time period for the F8 key to almost zero interval (less than 200 milliseconds). As a result, people almost can't press the F8 key within such a short period of time, and there is little chance to detect the F8 key to invoke the boot menu and then start Safe Mode.

How do I force Windows to start in Safe Mode?

Use Shift+Restart Hold the Shift key while clicking Restart from the Shut down or sign out menu. Select Troubleshoot > Advanced options > Startup Settings >Restart. After the PC restarts, there is a list of options. Select 4 or F4 or Fn+F4 (following the on-screen instructions) to start the PC in Safe Mode.

What do you do when automatic repair doesn't work?

How do I fix Windows 10 automatic repair couldn't repair your PC?Run fixboot and/or chkdsk command. ... Run DISM. ... Delete the problematic file. ... Disable Automatic Startup Repair. ... Restore Windows registry. ... Check device partition and osdevice partition. ... Disable early launch anti-malware protection. ... Perform Refresh or Reset.More items...•

How do I get to advanced boot options in Windows 8?

Method 1: SHIFT + RestartHold down either SHIFT key while tapping or clicking on Restart, available from any Power icon. Tip: Power icons are available in Windows 8 from either the Settings charm or from the logon/lock screen. ... Wait while the Advanced Startup Options menu opens.

How do I run a diagnostic on Windows 8?

Press the Windows Key + R Then type perfmon. Then right click the System Diagnostics or System Performance (depends on which report you want to generate) and click on Start. This will start collecting the report.

What happens when you start Windows 8 in safe mode?

If Windows 8 does start properly in Safe Mode, you can then troubleshoot to see what driver or service might be causing the problem that's preventing Windows from starting normally.

Where is safe mode in Windows 8?

Safe Mode in Windows 8 is accessible from the Startup Settings menu, itself found on the Advanced Startup Options menu. So the first thing to do, then, is to open the Advanced Startup Options menu.

How to access startup options in Windows 8?

Choose Startup Settings. On the Advanced options menu, touch or click Startup Settings . If Startup Settings isn't available, it's likely due to the way in which you accessed Advanced Startup Options. See How to Access Advanced Startup Options in Windows 8 and choose method 1, 2, or 3.

What to do if you don't have administrator access?

If you know you don't have administrator-level access, log in with another account on the computer that does.

Can you bypass Windows 8?

This bypass is no longer possible in Windows 8. In fact, even the widely publicized SHIFT+F8 option, which supposedly works to force Advanced Startup Options to appear (and ultimately Startup Settings and Safe Mode), only works on very slow computers.

Can you bypass the Advanced Boot Options menu?

This bypass is no longer possible in Windows 8.

Does Windows 8 start automatically?

The Windows 8 Start screen doesn't start automatically. Instead, you're taken immediately to the Desktop and a Windows Help and Support window appears with some basic Safe Mode help. You might also notice the words Safe Mode at all four corners of the screen.

How to get into safe mode on Windows 8?

You can also launch Windows 8 safe mode via the PC settings: Press the key shortcut (WIN+I) Click on “Change PC settings”. Click on “Update and recovery”. Click on the “Restart” button under “Recovery”. A click on “Change PC settings” will take you to the Windows 8 system recovery settings.

What is Windows 8 safe mode?

Safe mode is a Windows operating mode that is intended for emergencies and is normally not required. If a computer is still able to boot in Windows 8 safe mode, system repairs can be performed, problematic device drivers removed, data rescued, and viruses cleared.

How to repair a computer?

To do so, click on the “Next” button in the start screen. A click on “Repair your computer” opens the system recovery with the advanced startup options. Next, select the menu item “Troubleshoot” in the system recovery screen and then “Advanced options”, where you can start the “Command Prompt” (cmd.exe).

How to restart Windows 8?

Click on “Troubleshoot” under “Select option”. A click on “Advanced options” provides access to the system recovery options of Windows 8. After selecting the “Startup Settings”, an advanced restart can be initiated. A click on the “Restart” button initiates the final start phase .

What is special mode in Windows 8?

The special mode of Windows 8 is indicated by the text “Safe Mode” displayed at the edges of the desktop screen. Microsoft offers a number of ways to boot Windows 8 in safe mode. Most methods can be accessed while running Windows. However, the special mode can also be launched if Windows completely crashes.

How to open Windows 8 recovery settings?

A click on “Update and recovery” will open the Windows 8 system recovery settings with advanced start options.

What number is safe mode on a keyboard?

Once you press number 4 on the keyboard, safe mode will then be launched.

How to get into safe mode on Windows 10?

Go to "Advanced options -> Startup Settings -> Restart." Once you get to the Startup Settings screen, press the 4 or the F4 key on your keyboard boot into Safe Mode, press 5 or F5 to enter " Safe Mode with Networking," or press 6 or F6 to enable " Safe Mode with Command Prompt."

How to get into safe mode on a laptop?

Safe Mode - press the 4 or the F4 key on your keyboard

How to open system configuration?

On the Start Screen, type msconfig and click or tap on the result bearing the same name. Also, if you want to see other ways to open the System Configuration tool, you can read this article: 8 ways to start System Configuration in Windows (all versions).

Why does Windows tell me to restart?

Windows informs you that it is about to restart so that it can change several boot options. Among other things, it also enables Safe Mode. Click or tap Restart.

How to restart Windows 8.1?

Use "Shift + Restart" on the Windows 8.1 Start screen. Windows 8 or 8.1 also let you enable Safe Mode with just a few click or taps on its Start screen. Head to the Start screen and press and hold the SHIFT key on your keyboard. Then, while still holding SHIFT, click/tap the Power button and then the Restart option.

How to make Windows 10 safe to boot?

In System Configuration, go to the Boot tab and, in the Boot options area, check the box that says "Safe boot." Then, click or tap OK.

Why doesn't the F8 key work?

The SHIFT and F8 keys on a keyboard. However, they often do not work because Microsoft changed the way that Windows 8 and 8.1 boot. They tried to make the whole boot process faster than before (in Windows 7 and prior), but that also stopped Windows 8 and 8.1 from being able to record any key presses during startup.

How to restart Windows 8?

Click on the Restart now button and Windows 8 will restart your computer and go directly into the Advanced Startup options menu. Now click on the Troubleshoot button and then the Advanced options button. When the advanced options screen opens, click on the Automatic Repair option. Your computer will now reboot and you will then be shown ...

How to access auto repair in Windows 8?

To access Automatic Repair in the Windows Recovery Environment you need to go to the Windows 8 Start Screen and type Advanced. When the search results appear click on the Settings category as shown below.

What does automatic repair do?

Automatic Repair will start automatically when Windows is unable to start properly. Once started, it will scan various settings, configuration options, and system files for corrupt files and settings. If it detects anything, it will automatically attempt to fix them for you. To access Automatic Repair in the Windows Recovery Environment you need ...

Can Windows 8 auto repair?

The automatic repair process can take a quite a while, so please be patient while Automatic Repair attempts to find a repair startup problems in Windows 8. During this process your computer may reboot. This is perfectly normal and nothing to worry about. Once the automatic repair process has completed it will tell if you if it was able to repair anything. If it was not able to repair anything you will be shown a prompt asking if you wish to shutdown or use some other tools.

What if I can’t fix my issue through Safe Mode?

If your computer remains unresponsive after a complete Windows reinstall, your hardware may be faulty. A full Windows reinstall eliminates any software-related issues unless there’s an outdated hardware driver that has to be updated.

What is safe mode on Windows 10?

The Windows safe mode is a diagnostic mode with only the necessary drivers and files loaded to start your computer. This can be very helpful if you are having trouble starting your device, as it will allow you to run System Restore without loading all of the other drivers that are not related to the issue. If this does not resolve your issue, then you may want to re-install Windows.

How to restart Windows 10?

Windows 10: Click Restart on the “Power Options” submenu of the Start Menu while pressing and holding Shift. Click Advanced Options > Startup Settings > Restart. When you see the Startup Settings screen , press the “4” key.

Why does my computer crash in safe mode?

If your computer is stable in Normal Mode but crashes in Safe Mode, there’s a good chance that the problem lies with the software. If your computer continues to crash in Safe Mode, this is frequently a sign of a hardware issue. (Note that stability in Safe Mode doesn’t necessarily indicate it’s due to a hardware problem. For example, if your graphics card is broken and causes shutdowns under load, it may be stable in Safe Mode, as in Safe Mode the graphics card driver doesn’t load up)

How to open a system configuration window?

Press Win+R (Windows key plus the R key) at the same time to bring up a Run dialog box. Type msconfig and click OK. This will open the System Configuration window.

How to get to Advanced Boot Options?

1) Restart your computer and immediately begin tapping the F8 key until your computer enters the Advanced Boot Options menu.