[Solution] How to Fix Xbox One Controller
If changing the batteries doesn’t work, try this:
- Turn off your Xbox One fully by pressing and holding the power button on the front of the system for 10 seconds.
- Unplug your console’s power cable for a few minutes.
- Use a micro-USB cable you know is good (try others if the first doesn’t work) to connect your controller to the system.
Full Answer
How do you fix a broken Xbox One controller?
What You Need to Replace Xbox One Controller Bumper
- Plastic Trim Tool
- Torx Screwdriver Set
- Replacement Xbox One Controller Bumpers (LB/RB)
Why is my Xbox One controller not working?
Xbox One Controller Not Working on PC [Solved]
- Method 1: Unplug the Controller then Replug it (Wired Only) Try to unplug and replug the controller to the computer. ...
- Method 2: Use a Different USB Cable (Wired Only) If you’re using a wired controller, a broken USB cable can be the cause. ...
- Method 3: Update the Xbox One Controller Driver. ...
- Method 4: Update the Driver Using Driver Easy. ...
How do you turn off the Xbox One controller?
- Touch the Xbox button on the front of your Xbox One console.
- Press and hold down the Xbox button on your wireless controller until the Off menu is displayed. ...
- Press the Menu button on your controller, select Settings, select Power and Start, and then turn off the console.
- Say Xbox, turn off, and then select Yes.
How do I reset the Xbox One controller?
- Press and hold the Xbox button in the center of your Xbox One controller to open the Power Center.
- Select Restart console.
- Select Restart.
Can an Xbox One controller be repaired?
The supplies you'll need to get your controller in fighting condition again are a flat-head screwdriver, T8H screwdriver, T6 screwdriver and an Xbox One conductive button pad repair kit. You can purchase all of these items for just a few dollars each online. You'll also need a few damp cotton swabs.
How do I fix my broken Xbox One controller?
Many controller issues can be resolved by putting the controller through a complete power cycle. To power cycle your controller: Press and hold the Xbox button for 5-10 seconds, until the controller turns off. Wait a few seconds, then press and hold the Xbox button again to turn the controller back on.
How do I fix my Xbox One controller joystick drift without taking it apart?
To fix Xbox One and Series X/S controller drift without opening them, you need to use cotton swabs to rub isopropyl alcohol on the rounded surface of the left or right analog stick. Then keep it for 30 sec aside, repeat the process 3-4 times, and your Xbox controller drift will be fixed now.
What causes an Xbox controller to stop working?
Batteries: The most common reason an Xbox One controller fails to turn on has to do with the batteries. If the batteries are worn out or in need of a charge, it won't turn on. It also won't turn on if the batteries are installed improperly.
How do you fix a controller that moves by itself?
Clean Your PS4 ControllerClean the area around the analog stick. Wipe off any dust or debris around the analog stick with a cotton swab.Clean the analog stick shaft. Dip a cotton swab in rubbing alcohol and rub it against the analog stick shaft. ... Test the PS4 controller again.
How do I fix my controller?
2:1525:1912 Ways to Resolve Analog Stick Problems (PS4 DualShock 4 ...YouTubeStart of suggested clipEnd of suggested clipFirst clean out the outside area around the shaft there's normally a lot of dirt underneath. ThereMoreFirst clean out the outside area around the shaft there's normally a lot of dirt underneath. There then find a way to blow air around the sticks one way would be to use canned.
What are causes of stick drift?
A common reason why controllers run into drift problems is that they are prone to deterioration, which will naturally occur with use. In more recent years, the life cycle of technology has shortened dramatically to promote further purchases (yay, capitalism), thereby further exacerbating the issue.
What Causes Xbox One controller drift?
As we said, low battery levels are the most common reason for joystick drift on Xbox One controllers. So, the first solution is to replace the batteries on the controller. If you have a pair of spare batteries, you can put them in and see if the issue persists.
How do I stop my controller from drifting?
How to avoid Stick Drift on a controllerKeep your controller away from dusty places.Keep your controller and your hands as clean as possible.When the controller is unused, put it in a drawer or a case. ... I recommend covering the controller with a cloth.
Why is my Xbox One controller flashing and not connecting?
0:002:15Why Is My Xbox One Controller Blinking? - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut is usually on the front or side and looks like this. Now press the pair button on your xboxMoreBut is usually on the front or side and looks like this. Now press the pair button on your xbox console and release it and within 20 seconds hold down the corresponding pair button on your controller.
How do you fix your Xbox controller when it wont connect?
To resync an Xbox One controller:Turn on your Xbox One.Turn on your controller.Press the sync button on the Xbox.Press and hold the sync button on your controller.Release the sync button on the controller when the Xbox light on the controller stops flashing.
Why won't my Xbox One controller turn on?
This is another common problem, with similar solutions to the above. When your Xbox One controller won't turn on, first, make sure the batteries aren't dead. If the batteries are low , the controller won't turn on at all.
How to change battery in Xbox One?
If changing the batteries doesn't work to power on your Xbox controller, try this: 1 Turn off your Xbox One fully by pressing and holding the power button on the front of the system for 10 seconds. 2 Unplug your console's power cable, and leave it unplugged for a few minutes. 3 Use a USB cable you know is good (try others if the first doesn't work) to connect your controller to the system. 4 Plug your Xbox back in and turn it on using the power button on the system. Don't press anything on the controller until the Xbox boots up. 5 Try pressing the Xbox button on your controller at this point to see if it's working.
Why is my Xbox One controller blinking?
If Your Xbox One Controller Is Blinking. If you press the Xbox button on your controller and it blinks or flashes, this usually indicates that your controller isn't paired to a console. As mentioned above, this can happen when you pair the controller to another system. But it can also occur due to various glitches.
How many controllers can you use on Xbox One?
While you likely don't use this many, the maximum amount of controllers an Xbox One supports is eight . After this point, you can't connect any more controllers. Hold the Xbox button on a controller and choose Turn controller off on the resulting menu to disconnect one or more of them.
How often does my Xbox controller disconnect?
However, if you're having a problem with your Xbox controller disconnecting, it probably happens much more frequently than every 15 minutes. If that's the case, you can try a few troubleshooting steps. It's important to confirm that your batteries are charged when you have this issue.
How far can an Xbox One controller be wireless?
The Xbox One controller has a wireless range of about 19-28 feet, according to Xbox Support. Try moving closer to your console if your controller won't stay connected. You should also remove obstructions between the controller and console, like laptops, metal shelving, and similar.
Can you update your Xbox One controller?
If your controller is functional, you can update it by tapping the Xbox button to open the Guide while your system is on.
How to fix Xbox One controller drift?
To fix Xbox One controller drift, you need to take the controller apart and repair or replace one or more components related to the analog sticks.
Why is my Xbox controller drifting?
When Xbox One controller drift occurs, there are three main causes: Worn out thumbstick pad: Each thumbstick consists of a boxy sensor component with a moveable shaft on top and a rubber or plastic component that snaps onto the shaft. If the rubber or plastic piece becomes worn, re placing or repairing it will fix your drift issue.
What to do if you break a plastic cap on a controller?
If you break either plastic cap, you will have to replace the entire analog stick module, which requires soldering. Remove the springs. Use tweezers if you're having trouble removing the spring. Replace with new springs, or springs taken from another controller.
Can you replace a thumbstick on an Xbox 360?
If only one thumbstick is giving you trouble, only replace the springs on that thumbstick. A lot of controllers, including Xbox 360 controllers, use the same analog stick component as the Xbox One controllers, so you can take springs from an old controller.
Safely disassemble your Xbox One controller for easy fixes
Jeremy Laukkonen is automotive and tech writer for numerous major trade publications as well as the creator of a popular blog and video game startup. A fan of EVs since the early 2000s, he stays up-to-date on the myriad complex systems that power battery electric vehicles.
How to Take Apart an Xbox One Controller
Before you can take apart your Xbox One controller, find a clean and clear workspace that's well lit. You will also need to obtain the following tools if you don't already have them:
Performing Xbox One Controller Repairs
Once you have successfully taken apart your Xbox One controller, you can attempt to make repairs. Some problems can be fixed by simply cleaning components, while other issues require you to replace components. In some cases, advanced skills like soldering are required to remove and replace components.
Why Take Apart an Xbox One Controller?
If your Xbox One controller isn't working right, and you've already updated the firmware and gone through some basic troubleshooting like checking the batteries, the next step is usually going to be taking the controller apart.
