how to repair your hard drive

[Solution] Hard Drive Repair Solutions to Fix Hard Drive Windows 10

1. Solution 1. Reinstall Your Hard Drive’s Driver. If your computer cannot read your external hard drive, you can connect it to another PC to see if the drive can be ...
2. Solution 2. Check and Fix Hard Drive Errors with Third-party HDD Repair Tool. You can use a professional HDD repair tool to fix hard drive errors. ...
3. Solution 3. Repair Hard Disk Error with CHKDSK Utility. If the above fixes cannot help you fix hard drive errors, you can run Windows CHKDSK utility with CMD to perform ...

Full Answer

How do you fix a bad hard drive?

You can attempt to fix your corrupted external hard drive using Check Disk, a utility that’s included with Windows that scans for hard drive related errors and attempts to fix them. Right-click Start and select Windows PowerShell (Admin). Type chkdsk E: /r. Replace E: with the drive letter of your corrupted hard drive.

How to fix your computer harddrive in under 5 min.?

Tidy up computer space with Disk Cleanup

• Choose Start→My Computer or Start→My Computer. ...
• Right-click the drive you want to check and choose Properties from the shortcut menu. ...
• Click the General tab, if it isn’t already open. ...
• 4. ...
• Clear the check boxes next to any files that you want to keep; check the check boxes next to any additional files that you want to clear off the disk. ...
• Click OK. ...

More items...

How do I restore to a new hard drive?

• Go to Settings.
• Go to Update & Security.
• Go to Backup to backup your PC to a USB drive or other storage device. ...

How do you reprogram a hard drive?

Windows XP and 2000

• Insert the Windows XP/2000 installation CD in the CD-ROM drive and restart the computer.
• When you see the message "Press any key to boot from CD," press a key on the keyboard.
• Press the Enter key at the Windows XP Setup welcome screen, then press F8 to accept the Terms and Agreements.

More items...

How do I fix a corrupted hard drive?

You can fix a corrupted hard drive via CHKDSK command. Type cmd in the Windows search box. Right-click the best match and then choose Run as admini...

Can hard disks be repaired?

There are two types of sectors, a hard and soft sector. In most cases, Windows is able to repair a soft bad sector, as it's almost always related t...

How much does it cost to recover data from a damaged hard drive?

To recover data from a damaged hard drive will only cost you less than $100 with a piece of professional data recovery software, but the prerequisi...

How do I recover data from a crashed hard drive?

Get MiniTool Partition Wizard Pro Ultimate from its official website and install it on your PC. Launch Data Recovery. Then select the partition whe...

How to repair a corrupted hard drive?

You can fix a corrupted hard drive via CHKDSK command. Type cmd in the Windows search box. Right-click the best match and then choose Run as administrator. Type CHKDSK *: /f /r (* represents the drive letter of the specific drive that you want to repair in the Command Prompt window and hit Enter.

Why is my hard drive corrupted?

Hard drive can become damaged or corrupted due to various hard drive errors like bad sectors on hard drive, file system corruptions. So you must learn these basic tips. After reading this article, you may find that hard drive repair is not so complicated.

How to recover data from a partition?

Launch Data Recovery. Then select the partition where the data is lost and then click Scan. After scanning completed, check needed files and click Save button to save the recovered data to a safe place. Remember to save the recovered files on another drive. Otherwise, the lost/deleted data could be overwritten.

What recovery software to use for internal hard drive?

To make internal hard drive data recovery, my recommendation is to use reputable and reliable hard drive recovery software MiniTool Partition Wizard Pro Ultimate.

How to uninstall hard drive?

Right-click the hard disk with hard drive failure and then click Uninstall device to uninstall the drive. Step 4. Restart the computer and connect the hard drive. The drivers will start installing automatically in most cases. After restarting, you can check if your external hard drive can be read.

What happens if a drive doesn't have letters?

Logical Drive: All existing partitions on your computers will be listed here. If a partition does not have drive letters, it will be arranged at the end of the list.

How much does it cost to recover data from a hard drive?

To recover data from a damaged hard drive will only cost you less than $100 with a piece of professional data recovery software, but the prerequisite is that the hard drive is not damaged physically. However, if there are physical faults like bad electronic components on your hard drive, the data recovery cost is relatively high, which varies from $300 to $2000 or even higher.

How to repair a corrupted hard drive?

It can also selectively clean up different partitions to repair the corrupted internal hard drive. 1. Double-click "My Computer/This PC" and then click "Manage". 2. Click "Disk Management" in the list on the left. 3. Right-click on the local hard drive you want to format and select "Format".

What to do if you can't read your hard drive?

If you fail to read hard drive, for an external hard drive, try to plug hard drive into another USB port and open your hard drive again. As for the power check of the internal hard disk, there may be challenges. But if the PC can detect the internal drive, repairing the damaged internal hard drive is independent of the power supply.

What does it mean when you get a warning when you open a hard drive?

1. When you access the hard drive in "My Computer", receive a warning: "You need to format the disk in the drive before you can use it .". 2. A message of "H: is not accessible. The file or directory is corrupted and unreadable". prompts up when you intend to open your hard drive. 3.

How to open a hard drive on another PC?

To do so, you can：. Step 1. Navigate to My PC, right click on it to find Manage and then click on Device Manager. Step 2.

Why is my hard drive corrupted?

The hard drive may be attacked by the virus or physical damage due to power failure or unsafe ejection and so on. That makes it corrupts easily, no matter an internal hard disk or external hard drive. Formatting will erase your important data. You may have stored a lot of files there.

Is the Control Panel an effective path for repairing corrupted external drives and internal hard disk?

Moreover, the Control Panel is an effective path for repairing corrupted external drives and internal hard disk.

Why is my hard drive corrupted?

Corrupted files on a hard drive may come about due to many reasons. It may either be due to malware, electrical failure, or even errors or improper operations. Corrupted files will bring about hard drive failure and can even bring problems during the startup process. This problem comes about gradually and could lead to a computer crash.

How to check hard drive health?

Checking the hard drive health can be done easily either through Disk Management or by using the chkdsk tool. It is best to regularly check and repair hard disk error in Windows 10/8/7 with Chkdsk.

What is a full HDD?

On the other hand, the HDD in full is the Hard Disk Drive. It normally is designed as a mechanical device consisting of spinning or moving parts. These parts include the platters which carry the disk, a reading, or writing head which normally moves over the disk while reading or writing data, among many other parts.

Why does my hard drive make a clicking sound?

When a hard drive clicking sound is heard, it immediately identifies that the hard drive is not functioning properly and a hard drive failure is fast approaching. To understand where the click sound comes from, one should first know how a hard drive works.

What is a hard drive called?

A hard drive goes by many names depending on the user. Some will call it the hard disk others the fixed disk or drive or even fixed disk drive. All these names refer to the hard disk, including the version hard disk drive .

What is the difference between an SSD and a HDD?

There are many differences between an SSD vs HDD. To start, an SSD is fully termed as a Solid-State Drive and the configuration design of an SSD is like that of a USB Drive. What this means is that it has no moving parts, neither does it have a reading and writing head or even data disks. It comprises a set of chips or a chip, depending on the storage capacity, arranged together.

Why is my hard drive not spinning up?

Some other causes are related to electronic failure as well. Electronic failure can cause the system BIOS to be unable to detect the hard drive. At times, how a hard drive works will be affected, that is, it will not be able to spin up. One can also experience startup failure due to Electronic failure.

What is Going Wrong with Your Computer Hard Drive?

There is this friend of mine who is an HP user and he is getting a hard time with his PC's hard drive. We were figuring out what actually has gone wrong with the hard drive and succeeded, to our surprise. And therefore, I will be listing some symptoms that can help you learn what is going wrong with your computer hard drive so that you also get some assistance and fix the problem. You can refer to the following sections irrespective of the laptop or computer you use.

Why is my hard drive causing a hard drive failure?

Hardware Failure – This often happens due to the poor construction of a hard drive. The regular touching of magnetic plates inside of the hard drive can lead to a damaged hard disk. In such cases, it is better to create a back-up whenever symptoms arise.

Why is it better to clean your hard drive every month?

But a monthly checkup of junk or unwanted residuals (cache files or left out files after uninstalling software) with a professional tool would be a great help for your laptop. That is why it is better if you keep performing a cleanup every month to upkeep its performance.

Why is my laptop's motherboard damaged?

Damage Due to Water – Spillage on any of the internal parts of your laptop or computer can lead to a short circuit and hence a damaged hard drive and motherboard. You can lose your data in such cases and it is better to keep your system away from liquids.

What is a corrupted driver?

Corrupted Firmware or Unsupported drivers: Firmware corruption or unsupported drivers can lead to a problem called boot sector errors that can damage your hard drive. Such driver/firmware problems keep the laptop at risk of losing data and an unreadable drive.

What causes hardware issues?

Virus or Malware Attack: A malware or virus attack is another prime factor that can contribute to hardware issues like corruption or crashing. In this "Internet" era, we all make use of the internet day in and out. No wonder a virus or malware can sneak into your PC and corrupt important files on your hard drive and eventually crashing it up or causing data loss.

What is the difference between an internal and external hard drive?

The main difference between both of them is their location. External drives are plugged in via USB whereas an internal drive is an in-built part of your system.

How to fix corrupted external hard drive?

You can attempt to fix your corrupted external hard drive using Check Disk, a utility that’s included with Windows that scans for hard drive related errors and attempts to fix them.

What is the best tool to recover data from a hard drive?

To recover your data, you need a data recovery tool. The one we’re using is Disk Drill. Not only does it have an impressive track record of successful recoveries, it’s also packed with useful features that can be used to monitor your hard drive’s health and preemptively warn you of potential problems (we’ll look at those later).

What is the check disk command?

You can use the Check Disk (CHKDSK) utility in Windows to scan and fix any hard drive-related problems. The command being used will also look for bad sectors and mark them as unusable to the operating system.

Why is my hard drive not showing?

The drive is corrupted – Corruption can result in the hard drive not appearing when connected. Instead of checking Windows File Explorer, try checking Disk Management to see if it appears.

What is check disk?

Check Disk (CHKDSK) is a command in Windows that can scan and resolve any problems it discovers on your hard drive. It’s customizable using different parameters, depending on what you want the command to do.

Why won't my drive read?

Incompatible file system – If your drive is formatted with an unfamiliar file system, it won’t be readable. Try connecting it to a machine with a compatible operating system.

How to isolate a hard drive?

In order to isolate whether the issue sits with your hard drive or the computer, try connecting the hard drive to another computer. If the hard drive works in another computer, then the fault may actually be with your own computer.

How to test a hard drive?

Physically test the drive. Hold the drive in one hand and firmly spin it back and forth, listening for any noises as you do so . This may seem like "not doing anything", but actually if anything is loose, you may cause it to break!!! If you can't hear any noises, a likely cause—especially if you have an older drive, or one which ran very hot to the touch—is a seized head bearing or spindle. The following steps can be considered: If you open up the drive, you are likely to kill whatever was still able to be saved.

What does it mean when your hard drive crashes?

If it's an inconvenience when your system crashes, it's a disaster when your hard drive heads south. Usually, that means your data is destroyed, and your bits are blasted—unless you backed up, of course.

What to do if you can't hear anything?

If you still can't hear any noises, go on to the next step. However, if there is a difference, reattach the drive to your computer and listen for spin-up of the drive and normal clicking that indicates head activity. If all seems well so far, try to access the drive, and move your data onto a good drive.

Why does my drive make a clicking noise?

Check that you don't hear any rattling noises when you rotate the drive gently (back and forth) through 90 degrees. This would indicate loose and disconnected components inside the drive and are beyond the scope or intent of this article.

Why is my iPod hard drive jammed?

Community Answer. If it's an iPod hard drive, where failures are generally due to drops, then your issue is usually a jammed arm. Smacking it gently while it is clicking might fix it for a while. This also works with any drive that was physically dropped (laptop drives, external drives).

How to back up a plugged in computer?

The inside of your plugged-in computer will usually work. Slide in the new board, making sure it's seated firmly into the drive, then re-attach the screws. Reconnect the drive to the computer, then power back up. If it works, congratulations! It's a good idea to back up your data at this point, but you're ready to go.

What is data recovery service?

There are "data recovery services" that will disassemble your hard drive and do magic to the magnetic medium to recover as much information as possible. But they cost a lot of money. I might send an email to grc.com and ask them for a referral to a reputable data recovery service. At least you'll want to spend your money (and protect your privacy) on a company that has high customer satisfaction ratings.

How to repair corrupted hard disk?

Once the hard disk is corrupted, you may not be able to access the data on it. Thus you need to repair the corrupted hard disk. But how to fix corrupted hard dive? Here provides you two methods to complete this operation.

What causes damage to a hard drive?

Damage caused by related inferior accessories. (If the user buys a poor quality data cable, a poor quality power supply or a poor quality motherboard will cause damage to the hard disk. Therefore, users are advised to choose a good brand with good reputation when selecting accessories.)

What causes a hard drive to fail?

The main causes of hard disk damage can be summarized as follows: 1. Abnormally cut off the power supply for the hard disk. (eg: suddenly power off when powering on and off.) 2. Wrong partition operation. 3.

How to clean a disk in Windows 10?

1. Press “Windows” + “R” to open the Run box, typing “diskpart” and press “Enter”. 2. And then, type the following command and press “Enter” after each. list disk. select disk n (here “ n ” is the disk number of the disk you want to format.) clean.

Why is scanning and fixing Windows system files important?

The more corrupt the system files are, the more unstable and problematic the Windows operating system will become. Windows may crash or behave differently than you expect. That is why scanning and fixing Windows system files is important.

How to check for files in Windows 10?

To use the System File Checker in Windows 10, Windows 7, or Windows Vista, follow these steps: 1 Close any open programs on the desktop. 2 Select Start . 3 Enter Command Prompt in the Search box. 4 Select Run as administer . 5 Enter an administrator password, if requested to do so, or select Allow . 6 At the Command Prompt, enter SFC /SCANNOW. 7 Press Enter to begin the scan of all protected system files. 8 Do not close the Command Prompt window until the scan is 100% complete.

How long does it take for a file checker to work?

It may take from 30 minutes to a couple of hours for the System File Checker to scan and fix the Windows system files. It works fastest if you don't use the computer during this process. If you continue to use the PC, performance will be slow.

Does Windows Resource Protection find integrity violations?

Windows Resource Protection did not find any integrity violations. The computer isn't missing any files or doesn't have any corrupted system files. Windows Resource Protection found corrupt files and successfully repaired them. Windows Resource Protection could not perform the requested operation.