- Solution 1: Turn off Automatic Startup Repair. If your Windows 7 startup repair taking forever, you’d better disable it and access your computer normally.
- Solution 2: Check boot priority in BIOS. If you want to get rid of startup repair loop Windows 7, you need to check whether your boot priority is set correctly.
- Solution 3: Check and repair drive errors with chkdsk. If Windows 10 startup repair not working, the built-in hard drive check tool may be a good choice. ...
- Solution 4: Fix corrupted BCD by bootrec. To get rid of Windows 10 startup repair, you can use the Command Prompt option in Windows 10 boot options menu.
- Solution 5: Restore Windows. Sometimes, problematic update or outdated Windows may trigger the Windows error recovery loop. System restore is the easiest solution.
- Solution 6: Reset Windows. If you do not have a Windows DVD or bootable medium, reset PC is another way to fix Windows startup repair.
- Solution 7: Perform a clean reinstallation. The more dramatic solution to startup repair issues is to execute a clean reinstallation. ...
- Open an elevated command prompt.
- Type the following: bcdedit /set {current} bootstatuspolicy ignoreallfailures.
Why is Windows 7 not starting?
There are multiple reasons of this issue and we have listed some of them you can check below:
- The external devices that are connected to the laptop.
- There is no enough power in your ASUS.
- Your laptop screen is broken.
- Minor system issues cause this problem.
- Other uncertain software glitches or hardware issues.
How do I force Windows 7 in repair mode?
How do I repair Windows 7 without reinstalling?
- Safe mode and Last Known Good Configuration. …
- Run Startup Repair. …
- Run System Restore. …
- Use the System File Checker tool to repair system files. …
- Use Bootrec.exe repair tool for boot problems. …
- Create a bootable rescue media.
How to fix Windows 7 when it fails to boot?
Solution 2: Run Chkdsk to Fix Disk Boot Failure on Windows 10/8/7
- Boot PC with a Windows install disc Insert a Window installation CD into your computer. ...
- Choose Command Prompt Select your Windows installation drive and press "Next" to move on. In most cases, you can click C drive as your default Windows installation drive. ...
- Run chkdsk utility
How do you fix Windows 7?
Windows 11, as with every other major new release ... for the broken Appx PowerShell cmdlet functionality that affected PowerShell 7.1 and later. There’s also a fix for the “bad image” error that popped up during startup. Moreover, Microsoft has ...
How do I exit Startup Repair?
Method 5: Disable Automatic Startup Repair In Command Prompt, type bcdedit /set {default} recoveryenabled No and press Enter. Restart your PC, the Automatic Startup Repair should be disabled and you might be able to access Windows 10 again.
How do I turn off automatic repair in Windows 7?
Fix #2: Disable Automatic RestartRestart your computer.Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or system information)Quickly begin tapping F8 repeatedly, until you see the list of boot options.Choose “Disable automatic restart on system failure”More items...
How long does Startup Repair take in Windows 7?
Startup Repair in Windows 7 should take between 15 and 45 minutes. If it takes longer, something is wrong. Why does it take so long? It could be for two reasons: it is either stuck or your Windows simply can't fix the problem.
What is the cause of Startup Repair in Windows 7?
Startup Repair will run if you don't select from other options after a bad shutdown, one of which is to boot normally (the end user doesn't always follow what's onscreen so you end up looking like it's a do or die situation).
Why is my computer showing startup repair?
As mentioned, bad sectors and file system errors on your hard drive may be the reason why you receive the error message "Startup Repair cannot repair the computer automatically". Running CHKDSK is able to check and repair your disk errors including bad sectors and file system errors.
Will Startup Repair delete my files?
Note: After clean boot troubleshooting step, follow the “Steps to configure Windows to use a Normal startup state” in the provided link to return your computer to Normal startup mode. Method 2: Startup repair will not always wipe out the data. You may refer the articles below to perform a startup repair.
Is Startup Repair Safe?
However, the Windows Startup Repair defragmenter is completely fake. Windows Startup Repair will perform a fake scan of your computer system and then return a long list of nonexistent errors.
Why is Startup Repair taking so long?
Generally speaking, there are 2 main causes. If the boot sector is infected by viruses and other malware, the bootloader and booting chain will get damaged. And the virus may then prevent Startup Repair from either running or implementing its repair normally. So the infinite loop of Startup Repair occurs.
How do I bypass preparing automatic repair?
If the above trick fails, try the following solutions.Method 2. Boot your computer in Safe Mode. ... Method 3. Rebuild BCD with the Command Prompt. ... Method 4. Disable Automatic Repair at boot. ... Method 5. Run the Fixboot and Chkdsk commands. ... Method 8. Restore the Windows Registry. ... Method 9. Reset or Refresh Windows 10.
How do I bypass a repairing disk error?
What to Do on Stuck “Repairing disk errors” Issue in Windows 10?Let It Finish Overnight. First of all, “Repairing disk errors” is triggered by automatic CHKDSK on booting. ... Restart from Safe Mode. It is known that safe mode can solve myriad problems in computer. ... Automatic Repair. ... System Restore. ... Replace Drive.
What is PCRepair?
PCRepair is a powerful easy-to-use cleanup & repair tool for your PC. It will pinpoint error causes and improve PC stability.
When did Windows 10 sign in automatically?
Sign-in Automatically to User Account in Windows 10 Version 2004
Does Winaero depend on support?
Winaero greatly relies on your support. You can help the site keep bringing you interesting and useful content and software by using these options:
What to do if you can't start Windows 7?
NOTE: If you are unable to start your Windows 7 computer normally after installing new drivers or changing settings, you can try the "Last Known Good Configuration" option before trying Safe Mode. This can load the drivers and registry data that worked the last time you successfully started and then shut down Windows 7.
Where is the disable automatic restart on system failure?
The “disable automatic restart on system failure” option can be seen in the Advanced Boot Options window. Here is how to trigger this action.
Why does the infinite loop of startup repair occur?
If the boot sector is infected by viruses and other malware, the bootloader and booting chain will get damaged. And the virus may then prevent Startup Repair from either running or implementing its repair normally. So the infinite loop of Startup Repair occurs.
How to roll back Windows 7 update?
1. Access the Safe Mode by pressing the F8 key while the system is booting up.
How to run chkdsk?
To run chkdsk, please do as follow: 1. Insert your Windows 7 installation disc into the CD drive, and boot Windows from the disk. 2. Press any key when you see “Press any key to boot from CD or DVD.”.
How to check if Windows 7 is in safe mode?
Once you have booted into Safe Mode, you will see an environment that’s similar to the usual Windows 7 desktop. Now you can search for “Programs and Features” under the Start Menu. Then click on “View installed updates ”.
How to restore Windows 7 to earlier state?
To access System Restore, follow the same steps in the third method to reach the System Recovery Options screen, click on "System Restore" and follow the instruction to finish the operation.
How to fix Windows 7 startup repair loop?
Another method to fix the Windows 7 Startup Repair loop problem is to check the boot volume and fix errors. If your drive has filesystem corruption, it may lead to system failure. You need a command prompt to run chkdsk command.
What is it called when Windows 7 runs into startup repair?
Windows 7 boot again and again into Startup Repair without loading the normal Windows 7. This is called Startup Repair loop.
How to fix Startup Repair infinite loop in Windows 7?
If you no longer have the installation media, a system repair disc can also help you make it. You can scroll down to access the tutorial to learn how to create system repair disc.
How to fix boot failure?
1. Boot your computer from Windows system repair disc and then bring up a commad prompt as you do in the second method. 2. Then you can type the following command to rebuild master boot record (MBR), partition bootsectors, and boot configuration data (BCD) to the startup issue. bootrec /fixmbr.
How to install Windows 7 on a Windows 7 laptop?
Insert the Windows 7 installation disc and boot your computer from it. 2. Press any key when you see “Press any key to boot from CD or DVD.”. 3. Choose Repair your computer > select your OS from the list when the Startup Repair finishes scanning your PC. 4.
How to restore Windows 7 to working state?
1. Enter the System Recovery Options screen from system repair disc or installation disc. Just like the same steps in the second method. 2.
Why are my restore points invalid?
System restore points are stored in the corresponding volume, so the restore points become invalid if the volume corrupts.
What is Windows startup repair tool?
The Windows Startup Repair Tool is a handy feature in Windows, especially in Windows 10. If Windows is not booting up correctly, or you are experiencing other issues that indicate corruption in your system, the Windows Startup Repair Tool can be used in an attempt to fix the issues.
Why does startup repair take so long?
Sometimes, startup repair can take longer than this period because of hardware problems (failing HDD) and not a Windows problem.
Why won't my computer reboot?
There are two reasons: 1 It is just stuck and needs to be rebooted. Be aware that if you reboot several times during startup repair you can get to a state where the machine will only POST (Power On Self Test) - this is the DOS shell that Windows runs on - and you may need to reinstall Windows. Try it once, maybe twice. 2 You have a really corrupted install of Windows and it is basically unable to do a startup repair. In these cases I recommend rebuilding the MBR - Master Boot Record - from a command prompt. It is really easy once you actually get to the command prompt - you just type bootrec /MBR Ge
How to see if chkdsk is corrupted?
Open prompt from System Recovery Options and sort chkdsk C: /f to see your installation for corrupted, invalid or deleted system files.
How to bring up boot options menu?
You can also try pressing F8 before Windows is about to start to try to bring up the boot options menu, but most likely whatever option you choose will probably lead you back to startup recovery.
What is a system restore point?
If you’ve ever created restore point, select it and it will restore to your computer to the that point in time when everything worked properly (no files will be deleted, but apps and settings that have been modified since then will be removed).
Can you tell if your computer is a problem?
That depends on the actual problem that the computer has. There’s no way for us to tell you the problem you are having.
What is Windows 7 startup repair?
Windows 7 Startup Repair stuck also can be called Startup Repair Windows 7 loop. This error prevents you from accessing anything on your computer and presents an endless loop of loading Startup Repair.
What is startup repair?
It can be used to scan your computer and fix missing or damaged system files that prevent Windows from starting correctly. When Windows 7 fails to boot properly, this tool can be used to scans your PC for issues like corrupt system files or an invalid boot file, then tries to fix the problem.
Why is my computer stuck on startup?
If you stuck on computer startup repair screen, the problem is probably caused by damaged or corrupted BCD settings or corrupted boot partition. Follow the following steps to solve this problem.
How to restore AOMEI backup?
Boot the computer from the bootable media and it will take you to the main interface of AOMEI Backupper. Click Restore and follow the instructions. It only takes you a few clicks. If you want to restore to a dissimilar hardware, tick Universal Restore. Here is the Restore interface.
What is the command line tool for repairing a corrupted drive?
The command line chkdsk tool can be used to check (and sometimes repair) your drives for file system corruption.
What to do if your computer is too severe?
If the problem is too severe that all the above-mentioned method cannot solve the problem, you can try to perform a system restore. System restore can always be a simple solution to fix for this issue.
Does Aomei backup work on Windows 7?
With AOMEI Backupper, you do not need to bother about Startup Repair in Windows 7 not working issue. This software also can be applied to Windows 8/8.1/10/Visa/XP.