The fence post repair spike simplifies this by avoiding the concrete. Just push the flat of the repair spike against the post and with a hefty hammer knock it into the ground then simply screw to the fence posts you’re done!
Full Answer
How do you repair a fence post?
You have the choice of a few options to repair a damaged fence post:
- Concrete fence repair spurs? What are they? Simple concrete posts, up to 1.2m tall, with holes to bolt them to the post. ...
- Drive-in fence post spikes What are they? A long steel spike with a square box at the top for holding and securing timber posts. ...
- Metal repair spurs What are they? Shorter metal boxes with a spike on the bottom. ...
- Fence bolt downs
How to straighten a fence post?
Straightening a Leaning Post Set in the Soil
- Remove Any Stress or Weight on the Affected Posts. You need access to the fence post without any interference. ...
- Examine the Post. Check the post carefully. ...
- Remove Soil from the Side of the Post Away from the Lean. ...
- Use a Level to Ensure the Post is Straight Up and Down. ...
- Replace the Soil at the Post Base. ...
- Don’t Get in a Hurry. ...
- Reinstall the Fencing. ...
How to fix fence post?
Tools needed to do the fence repair
- 1 set of (2) Post Buddy stakes
- Drilling hammer
- Power drill
- 2-½” Exterior wood screws
- 2×4 piece of wood – (one that is long enough (approx 6”) to prop against the fence post to sturdy and straighten it in preparation for hammering in the stakes). ...
- Work gloves
- Safety goggles
How to drive a fence post spike into the ground?
E-Z Spike
- When setting your post, you will first place the spike around the fence post you are using.
- Then, you will take a sledgehammer and pound the E-Z spike and fence post into the ground.
- As you pound the post into the ground, the E-Z spike will start to separate from the fence post.
How do you use fence post spikes?
1:245:56Install a METPOST | FENCE SPIKE | Like a Professional Fencer - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust light taps. And straight down on top. So ideally don't have your hand in the way. And then justMoreJust light taps. And straight down on top. So ideally don't have your hand in the way. And then just. A few taps on top to get it. Started.
How do you use a repair spike?
0:111:23How to replace a damaged or rotten fence post - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a fence fast repair spur. And position it over the corner of the old post. Using a dolly andMoreTake a fence fast repair spur. And position it over the corner of the old post. Using a dolly and sledgehammer carefully drive the repair spur. Between the old wood of the post. And the concrete.
Do fence post spikes work?
Fence post anchor spikes work well by allowing one to place and remove fence posts without having to dig large holes. A fence that uses fence post anchor spikes is just as stable as a fence with posts set in concrete, with the added benefit of minimizing the rotting of the fence posts.
How do you use a ground spike?
0:131:18How to install a Ground Spike - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing to do is to dig a hole. The same depth as your ground spike and about a spades widthMoreThe first thing to do is to dig a hole. The same depth as your ground spike and about a spades width wide. Put the ground spike in the hole. And then add the post mix concrete.
How do you install wall spikes?
1:414:20Stainless Steel SUS 304 Security Wall Fencing Spikes - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are quite a number of holes on the fencing spikes with a diameter of 10mm. So we need to haveMoreThere are quite a number of holes on the fencing spikes with a diameter of 10mm. So we need to have at least four sets of sleeve anchors two at the end and two at the middle to firmly secure.
Should fence posts be set in concrete?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
What is a fence post spike?
Fence post spikes are a quick and easy solution when erecting posts, saving the time and effort of digging holes or mixing concrete. The best way to install fence spikes is by using a sledge hammer, with the finned steel spike providing secure anchorage in the ground.
What are fence spikes?
Fence spikes are a form anti-climb, anti-intruder barrier that act as both a visual and physical deterrent. The visual aspect of fence and wall spikes is an important security feature as this is often enough to deter would-be intruders.
How do you secure a fence post in the ground?
4:186:00How to Install Fence Posts | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosts can be set using concrete. Or compacted soil if setting metal vinyl or composite posts all theMorePosts can be set using concrete. Or compacted soil if setting metal vinyl or composite posts all the posts should be set in concrete. This will result in a sturdier fence.
How do you use post supports?
2:393:47OZ-POST® WOOD POST ANCHORS - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust take your hammer and tap it closed. Finally you'll want to use a caulking gun to close up anyMoreJust take your hammer and tap it closed. Finally you'll want to use a caulking gun to close up any holes or open spaces to help prevent rot it really is the easiest way to anchor a post.
How do you get a rotary spike out of the ground?
Dig around the spike until you can pull & wiggle it out. Replace earth & either hit it back in with a hammer & a block of timber (in a slightly different location) keeping it straight as you do ... or postcrete it back in straight depending on how permanent you want it to be.
Can you use fence post spikes for pergola?
Bolt down fence post shoes and spikes are a quick and easy way to erect garden Pergola posts as they require no digging or concreting into place, saving time and money.
How do you repair a broken fence post?
1:527:34How to Fix a Broken Fence Post in Under 30 Minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're basically going to hammer it in. So the trick here is to get the easy manner wedged in betweenMoreWe're basically going to hammer it in. So the trick here is to get the easy manner wedged in between the concrete and the fence post.
How do you fix concrete?
2:334:13How to Make Thin Repairs to Damaged Concrete with QUIKRETEYouTubeStart of suggested clipEnd of suggested clipThe surface of the patch. So that it is level with the surrounding concrete avoid adding water toMoreThe surface of the patch. So that it is level with the surrounding concrete avoid adding water to the surface of the patch. The additional water can cause surface color inconsistencies.
Can you salvage a rotted fence post?
Before you consider removing the wood post, carefully inspect it for damage. It could still be salvaged using our fence post mender to repair that cracked or rotted fence post timber in minutes without having to remove any concrete. Check our products listings for more details.
Can you reuse a cement ball for a fence post?
If you have an old wood fence post that is completely rotted off and you are able to remove it along with all debris, you could reuse the cement ball for a new post. Some have successfully used fence post anchors. This way the post will not be sitting in cement to rot off again.
Can you put vinyl fence posts around 4x4 posts?
A good quality PVC fence system will have 4x4 treated wood posts and metal sleeve insert, the vinyl fence posts will fit around the 4x4 and metal sleeve. Inspect the post carefully to see what you have. If you don’t have a wood insert remove the cap and measure the area. You can reinforce it by inserting a new wood post.
Can you repair a vinyl fence?
However sometimes vinyl fence posts or vinyl fence panels can get damaged and need to be repaired. There are a variety of environmental situations that would cause the need for vinyl fence repair. For example, rain can cause ice to frost the fence posts and pull them out of the ground. Filling the hole with cement will help. Other vinyl post repairs can include repairing holes, digging new holes or making existing holes deeper.
Can you fix a broken fence post?
It can still be saved! You can save a lot of time and money by using a fence post mender instead. Fence Daddy offers a fence post support system that mends and strengthens your wood fence post in minutes. No post hole digger required! You won’t need to remove the broken post or concrete, our system can fix fence posts while still in the ground.
Can you repair a fence post with a mender?
As with traditional wood rot, check to see if there is any damage at the base of the post. If not too extensive, good news! You can repair it easily with Fence Daddy’s fence post mender . Best of all, it costs a lot less than removing the entire post and starting over. When you don’t need to! We’re so excited to bring lower cost fence repair solutions to homeowners and fence contractors. Contact us for more information or suggestions. We’re happy to help.
Can a wood fence post pull out of the ground?
If the wood crumbles in your hands or the rot or termite damage covers more than about 30% of the post, you will need to replace the entire post. However you are likely to have a wood post that was just recently broken and has not rotted yet.
What is fence post repair spike?
Our fence post repair support spike is the ideal way to fix a broken fence"post as the Easy fence post repair support offset in spike goes past old concrete securing your broken fence and giving enough support to you your post
How thick is a spike?
Spike is 5mm powder coated steel! not all sellers offer this thickness.
Can you knock down a wooden fence post?
A wooden stake could not be knocked down the side of the post because of the concrete around base, meaning the fence would need taking down and the concrete digging out. The fence post repair spike simplifies this by avoiding the concrete. Just push the flat of the repair spike against the post and with a hefty hammer knock it into ...
What Size Fence Spike do I Need?
This obviously depends on the size of your post and the height of your fence, or other structure.
How to hit a fence spike with a mallet?
You push the fence spike into the ground as far as you can by hand, then slot the driving block into the top of the fence spike and hit the top of the block with the hammer or mallet.
Why do fence posts fail?
Most fences fail when the fence posts break due to rot or insect damage. If you have a broken fence post due to storm damage or rot, but most of the fencing is still intact you might want to just repair the post using a repair spike like the ones below. Fence post repair spike.
What happens when you tighten a rawl bolt?
With the rawl bolt, as the head of the bolt is tightened the bottom sheath expands, gripping the concrete.
How to make a driving block?
You could make your own driving block by cutting a short length of fence post and using that as a block.
What is a concrete fence post holder?
Concrete-in fence post holders are designed for use where soil conditions are unsuitable for drive-in spikes.
How to mark holes in post holder?
Place your post holder in position and mark through the holes onto the surface below using a permanent marker or similar .
