DIRECTIONS
- Allow engine to cool. Make sure engine is cool enough so radiator cap can be safely removed.
- Shake well. Pour Head Gasket Fix directly into radiator. If using in a small cooling system including all 3 and 4 cylinder engines, use 1/2 bottle. ...
- Fill radiator and overflow tank to proper level and reinstall radiator cap. Start engine.
- Turn heater on hot and fan on high.
- Idle engine for 15 minutes.
- Turn off and allow engine to cool.
- Top off (fill up) radiator and leave Bar’s Leaks Head Gasket Fix in cooling system for continued protection. Drive vehicle as normal. ...
Why choose bar's leaks head gasket fix?
Our easy-to-use Bar’s Leaks Head Gasket Fix will not only save you all that cash, but also get you back on the road in less than an hour. At Bar’s Leaks, we specialize in creating chemical repair solutions that are fast, easy, effective and affordable.
How do you fix a leaking head gasket?
Start engine. Turn heater on hot and fan on high. Idle engine for 15 minutes. Turn off and allow engine to cool. Top off (fill up) radiator and leave Bar’s Leaks Head Gasket Fix in cooling system for continued protection. Drive vehicle as normal. Many leaks seal instantly, but some can take a few additional days of usage.
Is it bad to have a blown head gasket?
There’s no reason a blown head gasket should sideline your life. For nearly 70 years, Bar’s Leaks has served car owners with effective solutions to complicated problems like blown head gaskets and leaks related to engine oil, power steering, cooling systems, transmissions and more.
What is head gasket repair and how does it work?
Our head gasket repair is a professional-strength sealant that penetrates the leaking, blown or damaged head gasket area drying to form a seal that is actually stronger than the original head gasket itself.
How long does it take for bars head gasket sealer to work?
about 15 to 30 minutesA head gasket sealer works when you pour it into the radiator. You run the car for about 15 to 30 minutes, with the heater and fan on high. Then the special chemicals in the sealant work via heat. They will seek out and fit in cracks and gaps in the head gasket.
Does bars leak work for a blown head gasket?
Bar's Leaks Professional Carbon Fiber Blown Head Gasket Repair is the strongest antifreeze-compatible solution on the market, period. It penetrates a leaking, damaged or blown head gasket, drying to form a seal that's actually stronger than the original head gasket itself.
Can you use bars head gasket sealer more than once?
Yes. You can use the blue devil head gasket sealer more than once. This product does not contain petroleum distillates, so you might use it more than once if a leak occurs after the last time you used it.
How do bars Stop leak head gasket repair?
1:282:26Tech Review: Bar's Leaks Head Gasket Repair Solutions - YouTubeYouTubeStart of suggested clipEnd of suggested clipHead gasket fix is easy to use with the engine cold remove the radiator cap and depending on yourMoreHead gasket fix is easy to use with the engine cold remove the radiator cap and depending on your cooling system capacity. Or in up to a full bottle. And top off with coolant. Then starts the vehicle.
How long does Bar's leak head gasket last?
It depends. If the leak is mild to moderate, we've had customers run 10,000-50,000 miles with no further issues. If the leak is more severe, or on the edge of becoming severe, the repair might last a shorter duration. The advice we always give is to act at the first sign/symptom of a cooling system problem.
What is the best stop leak for blown head gasket?
The Steel Seal Blown Head Gasket Fix Repair Sealer is our top pick for the best overall permanent head gasket sealer. It works well on older and new vehicles and is suitable for cars, vans, SUVs, and trucks. If your budget is a little tight and you still need a professional-grade sealer, check out the K-Seal ST5516 HD.
Will bars leak damage my engine?
Bar's Leaks for Your Vehicle When you carefully follow the instructions for our engine, radiator or other stop leak products, there is no risk of damage.
Where do you put Bar's leaks engine Repair?
Bar's Leaks Engine Repair helps to stop and prevent these problems, and also extends the useful life of your engine. Adding to existing engine oil: Remove engine dipstick and check oil level. If oil is low, remove oil cap and install entire contents of the two-chamber bottle into engine crankcase.
Where do you pour head gasket sealer?
1:112:19How to Install BlueDevil Pour-N-Go Head Gasket Sealer - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the engine. Eileen you want to slowly pour the Blue Devil into the radiator.MoreWith the engine. Eileen you want to slowly pour the Blue Devil into the radiator.
How do you fix a head gasket without replacing it?
0:523:41How to Fix a Head Gasket Leak in Your Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen you want to take the two bolts off the thermostat housing and take the thermostat. Out with theMoreThen you want to take the two bolts off the thermostat housing and take the thermostat. Out with the thermostat removed the sealant will flow better and have a better chance of sealing the leak.
How do I know my head gasket is blown?
5 Signs Your Head Gasket Is Blown: Capitol Subaru Auto Care...Engine Overheating.White Smoke From Tailpipe. ... Low Coolant Level. ... Rough Idle/Engine Knock. ... Contaminated Engine Oil. We know that oil and water don't mix, but if coolant gets into the oil in your engine, the resulting mixture loses its lubricating qualities. ...
What leaks from head gasket?
A head gasket leak is when coolant is leaked from your vehicle, combustion gasses or a combination of both. When this happens, you will likely see blue smoke coming from the exhaust. If you notice that it generally means that there is excess oil that is entering into your combustion chambers.
Will bars leak plug my heater core?
Our Bar's Leaks Liquid Aluminum Heater Core Stop Leak is a one-of-a-kind solution that is guaranteed to safely and easily seal leaks in plastic, aluminum and metal radiators, heater cores, gaskets and freeze plugs.
Where is a head gasket?
Located between the cylinder head and the engine block, you'll find the head gasket. This small yet vital component is used to seal the internal combustion process allowing coolant and oil to travel throughout the engine to cool and lubricate.
Where are Bar's leaks made?
Each product is developed and manufactured right here in the U.S.A., just an hour outside Detroit, and each comes with the promise of ease-of-use and incredible results. While you can find other head gasket repair liquids on the market, other products don’t always fix the problem — and they can sometimes make your issue even worse.
Can you use head gasket repair liquid?
Using our head gasket repair liquid is easy. Simply follow along with Bobby and Caitlin in our how-to video to safely and quickly get your car back on the road. There’s no reason a blown head gasket should sideline your life.
How to check head gasket leak?
So, in a nutshell, this is how you can tell if one of our products will be able to help with with your head gasket leak: 1 If your vehicle can run for 15 minutes without overheating and you need our most professional-grade solution, consider our HG-1 product. 2 If your vehicle can run for 20 minutes without overheating, consider our 1111 product or 1100 product, depending on how easy you want the installation to be. 3 Bottom line that most chemical seal vendors won’t tell you: If your vehicle overheats within 15 minutes, chances are you need a physical repair by a licensed facility/mechanic. We’d love to be able to sell you a product, but if your car is overheating rapidly, no chemical fix will work. It’s not just ours that probably won’t work, but any. Save your money for a mechanic’s attention.
How to contact Barsleaks?
If you want to chat about this further, contact us at 800-345-6572 x204 (ask for Fred) or drop us an email at ‘support @barsleaks.com’. Or, you could always hit us up on Facebook. We do our best to respond as quickly as possible.
Is Bar's Leaks Head Gasket Repair a good product?
If you want a cheaper, but also strong product whose installation is a bit more involved, our Bar’s Leaks Head Gasket Repair (p/n 1100) is a great option. It offers a very strong seal, (though not as strong as our HG-1) lower price, but installation is more demanding because the formula is not compatible with antifreeze.
Can a head gasket leak be sealed?
There is one ultimate truth, no matter what any chemical tool vendor tells you: if your head gasket leak is too serious, no chemical tool will seal the leak. None. Zip. Zero. We’d love to tell you otherwise, but we’d be lying. If your leak is severe, then you’re looking at a physical repair. That’s the reality.
