What is a hydraulic kit used for?
Here's an essential hydraulic kit for auto body and frame repair. Kit includes a puller ram and a pusher ram for lifting, pushing, pulling, bending, and straightening. A must for a variety of auto body, frame repair, and construction jobs.
What is the 4 ton hydraulic Porta-power autobody and frame repair kit?
INTRODUCTION The 4 Ton Hydraulic Porta-Power Autobody and Frame Repair Kit is essential for auto body and frame repair. The kit straightens, bends or s eparates metal to repair collision damage in half the time of conventional pounding methods .
How does the Porta-power repair kit work?
OPERATION The Porta-Power Repair Kit has various attachments to push, pull, stretch and spread metal structure and panels to reshape them. The pump works in both the vertical and horizontal position. The oil filling screw must be at the top when used in a vertical position.
What is a hydraulic kit used for?
The hydraulic kit contains a heavy-duty pump and multiple extensions and accessories to repair body panel dents, level machinery and more. The 10,000 PSI pump in this portable hydraulic kit exerts tremendous force for fixing, forcing and shaping metal.
How can I straighten my truck frame at home?
1:1919:33THIS is the Proper Way to Straighten a Truck Frame at Home! F ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut then we're going to hook a strap up to it this is just so we got a good anchor. Point a lot ofMoreBut then we're going to hook a strap up to it this is just so we got a good anchor. Point a lot of people use these in frame shops real mechanics. Do.
How do I use a porta power?
10:5515:45How To Use A 10 Ton Porta Power Jack - Harbor Freight ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo our harbor freight port of power is actually turning out to be a really really good item here. IfMoreSo our harbor freight port of power is actually turning out to be a really really good item here. If many of the body shop grow could go ahead and work that can you work the pump. All right go slow.
How do you use a chassis straightener?
3:144:56Introduction to Auto Body Frame Straightening and Uni-body RepairYouTubeStart of suggested clipEnd of suggested clipAlso the front of the vehicle is lifted off of the ground to keep the car. Level after the vehicleMoreAlso the front of the vehicle is lifted off of the ground to keep the car. Level after the vehicle is set up we can move our frame straightener into place. And push it right up against that bar.
Is a bent frame fixable?
Yes, bent car frames can be fixed. They are fixed by trained auto body repair technicians with highly precise tools and hydraulic machines. These machines use immense force to push your frame back into being true and like your car's manufacturer designed.
How much does it cost to straighten a truck frame?
between $500 and $750Estimates vary based on the severity of the damage in question, but full frame straightening usually costs between $500 and $750 plus repairs to other areas of the vehicle. This process is highly situational – your best bet is to ask a body shop to evaluate the vehicle before you plan on having frame work performed.
What all can you use a porta power for?
Porta power kit that contains the heavy duty hydraulic equipment you need for lifting, pushing, pulling, bending, straightening and spreading! A must for a variety of auto body, frame, repair, and construction jobs.
Can you pull with a porta power?
This is a hydraulic ram that hooks right up to a 10 ton hydraulic pump, like in a 10 ton porta power. This is perfect for body work on trucks, tractors, and heavy equipment. These units are made for bending, straightening, and pulling items.
How do you use a hydraulic spreader?
0:161:39Tools of the Trade - Episode 1 - Hydraulic Spreader - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis tool uh operates on a simple mineral oil based fluid uh and used in conjunction with a hose.MoreThis tool uh operates on a simple mineral oil based fluid uh and used in conjunction with a hose. And a pump.
How does a frame straightener work?
A frame straightening machine works by using hydraulics and chains to pull the distorted frame back into its original shape. In order to repair a vehicle's frame using a frame straightening machine, the vehicle will be raised up on the platform and fixed in place.
Can you fix a rusted truck frame?
The answer to this question is yes, it is possible to weld a cracked truck frame. However, this is not a job to be taken lightly. If you make a single mistake, you could endanger both yourself and your passengers. But more than just putting your safety at risk, you could potentially be doing something illegal.
How is frame straightening done?
Technicians may use laser technology and automation to determine how much damage has occurred and what adjustments need to be made to bring the frame back into alignment. The vehicle is then securely fastened to the platform, and chains from the posts are affixed to the frame.
How do you straighten a bent chassis?
5:208:21Can you fix basic frame damage yourself? | Rob Dahm - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd spray this so you can see you want to go past half in the middle go right now we're trying toMoreAnd spray this so you can see you want to go past half in the middle go right now we're trying to bow it out just a little bit so that way once you let go of the pressure.
How do you check if a truck frame is straight?
You can test this issue straightaway by removing your hands from the steering wheel. If it pulls, your alignment is off. The steering wheel itself should also stay straight on the straightaway. A car with a bent frame will not maintain its alignment.
How do you straighten a bumper support?
0:1415:10The cheap way to straighten a core support! Redneck ingenuity creates ...YouTubeStart of suggested clipEnd of suggested clipThird step that's what we're going to do right now tear it apart assess the damage see what you gotMoreThird step that's what we're going to do right now tear it apart assess the damage see what you got to straighten. Cut off fix weld repair buy. And then four steps put it all back together.
How do I know if my frame is straight?
One of the easiest ways to check for frame integrity is by running a string line from the rear wheel. Place your bike on a paddock stand or centrestand. With the bike in gear, wrap string around the rear tyre and tape it in place so it doesn't move.
What does it feel like to have fluid on your skin?
DANGER! Seek immediate, professional medical treatment if fluid penetrates your skin. It may feel like a pricking or sting. Do not wait for the appearance of symptoms. A toxic reaction can occur from the exposure. Delay in treatment can lead to amputation or death.
What happens if you disconnect a hydraulic hose?
7. A damaged or disconnected hydraulic hose under pressure may whip around and inflict personal injury or damage the work area. Secure the hose to a fixed or permanent structure with clamps or cable ties.
What is hazard notice?
A notice is an alert that there is a possibility of property damage, injury or death if certain instructions are not followed.
How much pressure does fluid have to penetrate skin?
Fluid can penetrate the skin at 100 PSI pressure. Fluid escaping under pressure from the tool has sufficient force to penetrate your clothing and skin. Follow the precautions below to avoid an injection injury.
What is the stroke of a ram pump?
The pump features a 4-3/4 in. stroke with a 10-15/16 to 15-3/4 in. extension range. Extension tubes with snap- lock design allow for quick and easy assembly. An automatic pump overload system helps prevent damage to the ram and accessories.
How to store rags contaminated with hydraulic fluid?
Store clothing or rags contaminated with hydraulic fluid in an approved metal safety can with a spring -closing lid and venting designed to contain a fire.
What is a 4 ton hydraulic body repair kit?
The 4 Ton Hydraulic Porta-Power Autobody and Frame Repair Kit is essential for auto body and frame repair. The kit straightens, bends or s eparates metal to repair collision damage in half the time of conventional pounding methods .
Product Overview
Here's an essential hydraulic kit for auto body and frame repair. Kit includes a puller ram and a pusher ram for lifting, pushing, pulling, bending, and straightening. A must for a variety of auto body, frame repair, and construction jobs.
Warranty
We guarantee this product to be free from defects in materials and workmanship 90 days from the date of purchase. Limitations apply.
Warranty
American Forge & Foundry, Inc. warrants, to the final purchaser that all equipment offered by American Forge & Foundry, Inc. to be entirely free from operating defects in material and workmanship for a period of one year. Calibration on torque wrenches is warranted for 90 days from the point of purchase.
Questions and Answers
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!
