How do I fix my solarez ding?
- Sand the ding and the area around it. Roughing up the smooth surface helps the new resin adhere to the surfboard.
- Wipe away any dust or residue with a paper towel and rubbing alcohol or water.
- Apply the Solarez resin.
What is solarez® repair putty?
Wahoo International 2018-04-07T04:19:09-08:00 SOLAREZ® repair putty is a mixture of high-strength, fiber reinforced polyester resin and an amazing solar-activated catalyst. There is no mixing required, just use it straight from the tube. SOLAREZ® quickly and durably repairs fiberglass, plastics, wood and metal in minutes.
How do you cure solarez resins?
They can cure slowly by heat or by contact with oxidizers or metals but they are kept in liquid state by “inhibitors” in the formula that rely on oxygen to make them effective. In order to prolong the shelf-life of Solarez resins, you can do so by storing them in a container with lots of “head space” that is, air space above the liquid level.
Can I thin solarez®?
CAN I THIN SOLAREZ®? You may thin Solarez very simply by heating it in a paper cup for a few seconds in a microwave oven. (microwave ovens vary widely in strength so check your resin every 5 seconds to see that it doesn’t’t get too hot –hotter than drinkable coffee 130°F). This Solarez cannot have any MEKP catalyst in it!!!
Does solarez need to be refrigerated?
Refrigeration is not necessary but certainly will prolong the life of the product. Liquid Solarez’ (eg pints, quarts) shelf-life can easily be increased by opening the lid monthly and allowing fresh air to circulate in the dead-space of the can. If the level of the liquid is high (little dead-space) the shelf-life will decrease.
How do you use the solarez repair kit?
1:554:06Repair your Surfboard Easily - with Solarez - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis back the epoxy is sealed for safety there's a nice little opener on the inside. So you justMoreThis back the epoxy is sealed for safety there's a nice little opener on the inside. So you just have to click it. And that opens it up.
How long does it take solarez to cure?
3 minutesDescription. SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
Can solarez dry without sun?
Wahoo International2020-03-31T16:03:35-08:00SOLAREZ® quickly hardens but only when exposed to direct sunlight. In the shade, you have all the time you need to put the goop where you want it and to remove excess bubbles.
Is solarez permanent?
MFitz73 Well-Known Member. suncure and solarez sun curing products can be used for permanent repair.
How do you polish a solarez?
12:4617:42How to Clear Coat A Guitar With Solarez UV Cured Polyester Gloss ...YouTubeStart of suggested clipEnd of suggested clipI use a buffing machine which you can see there in the corner. It has two large buffing wheels and IMoreI use a buffing machine which you can see there in the corner. It has two large buffing wheels and I'll use a couple of different polishing compounds to get my final high-gloss shine.
Is solarez toxic?
HARMFUL IF INHALED. MAY CAUSE ALLERGIC RESPIRATORY REACTION. MAY CAUSE LUNG DAMAGE. MAY CAUSE ALLERGIC SKIN REACTION.
Can I surf with a ding in my board?
Leaving dings or cracks can allow water to get into the board causing the board to get waterlogged. If you continue to surf on a board and not fix the ding over a long period of time the water will cause the fiberglass to delaminate from the foam causing serious damage to the integrity of the board.
Why is my UV resin cracking?
Don't mix too much resin and hardener at once. Resin kits have a maximum mixing amount. This is the maximum amount of resin and hardener you should mix together in one cup at one time. Mix more than this, and the resin will overheat and crack.
How long does ding all take to dry?
*Cure Times for laminations: 30 - minute working time, 2 to 3 hours of Gel time and 6 to 8 hours full cure figured at 77 F.
Does UV resin turn yellow?
Exposure to UV light is the most common reason for epoxy resin turning yellow. When UV light hits the cured epoxy resin, whether directly or indirectly, the natural process of degrading the polymers within is sped up. This photochemical reaction is responsible for more than just turning the epoxy resin yellowish.
How do you use solarez UV resin?
1:163:07Lee Baerman Shows How to use Solarez UV resin to tie a fly fishing ...YouTubeStart of suggested clipEnd of suggested clipIf you mix up five minute epoxy or ten minute epoxy you're not going to be able to do as many I canMoreIf you mix up five minute epoxy or ten minute epoxy you're not going to be able to do as many I can do take this little tube sit out in the backyard in the Sun.
How do you apply Ding tape?
1:003:02Ding Tape 101 - Basic Application - YouTubeYouTubeStart of suggested clipEnd of suggested clipApplication would be starting with a dry clean surface applying the ding tape over the ding.MoreApplication would be starting with a dry clean surface applying the ding tape over the ding.
Will UV resin cure on a cloudy day?
Working in adequate sunlight should do the job because the UV rays emitted from the sun are able to cure the resin alone. However, if it's a cloudy day, you might need the help of UV lamp ultraviolet light.
Does UV cure epoxy?
UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. UV 60-7170 is water clear and is designed to be used as an adhesive, coating, or encapsulant. This system is moisture and chemical resistant.
Does UV resin turn yellow?
Exposure to UV light is the most common reason for epoxy resin turning yellow. When UV light hits the cured epoxy resin, whether directly or indirectly, the natural process of degrading the polymers within is sped up. This photochemical reaction is responsible for more than just turning the epoxy resin yellowish.
Can you use a UV flashlight to cure resin?
You need at least 4 watts to cure your UV Resin. You can use a lamp for nail curing or a UV LED flashlight.
How long does it take for SOLAREZ epoxy to cure?
SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required, just use it right from the tube. It gels in 5 seconds, curing in 3 minutes – but ONLY when exposed to sunlight.
Can you put epoxy resin in the sun?
It is important cover your repair with clear plastic prior to placing it in the sun. The epoxy resin won’t harden completely if exposed to air, and you’ll end up needing to sand through and off an uncured layer to get to the hardened surface. I had intended to glass over the Solarez-repaired area, but that wasn’t necessary.
How to thin solarez?
You may thin Solarez very simply by heating it in a paper cup for a few seconds in a microwave oven. (microwave ovens vary widely in strength so check your resin every 5 seconds to see that it doesn’t’t get too hot –hotter than drinkable coffee 130°F). This Solarez cannot have any MEKP catalyst in it!!! At this temperature, Solarez will be as thin as water and can instantly wet out fiberglass cloth. As soon as you pour out your resin onto a cool substrate, it will return to normal viscosity. If on the other hand, you want to add a thinning agent, you can add a little styrene monomer. It is not advised to add any more than 3% because adding styrene will soften the surface and cause premature yellowing. The adding of acetone or alcohol should be entirely avoided because these are not reactive diluents i.e. they do not become incorporated into the resin like styrene, they just boil out and cause pinholes.
Can you use red in Wahoo?
Wahoo International 2020-03-31T16:22:38-08:00 Yes, to a degree. Most any color (except black) may be added in moderation. Reds should be avoided or used sparingly. The idea here is light transmission. If light cannot penetrate the resin, it cannot cure it. So, if you want a thick (>1/8”) pigmented section, add 1% MEKP catalyst to your batch, this will allow the surface to cure by UV reaction. The resin will exotherm (heat up) and cause the underlying resin to cure faster than normal by the MEKP catalyst component.
Can you interrupt SOLAREZ?
Wahoo International 2020-03-31T16:03:56-08:00 Unlike dangerous M.E.K.P. catalyst, whose reaction proceeds irreversibly and sometimes catastrophically forward, SOLAREZ® ‘ can be interrupted at any time. Simply remove it from sunlight. When it is replaced into sunlight again, the reaction will resume. You may take advantage of this feature for making clean trims when the resin has reached its “gel-stage”, roughly 45 seconds in good sunlight.
What is a yellow solarez tube?
the regular "yellow" tube Solarez is to repair the broken/cracked resin/fiberglass. It hurts to see a 2 inch wide 1 inch deep hole filled with pure Solarez. If you lost foam, your want to re-build it up with the "white" Solarez Microlite filler. It's easy to sand to match the blank's shape. Then you cover that with the PU Solarez. From what I remember, the Microlite filler floats, the PU sinks.
Can you use microlite filler over a blank?
No, it has no strength. Just as you need to glass over the finished shaped blank, you need to cover the Microlite Filler with Solarez or resin/catalyst/fiberglass cloth ( or UV resin if you have ).
Can you use solar resin on board destruction stakes?
Another candidate in the board destruction stakes! The answer is yes and yes. Quite few forms of solar resin have fine glass particles in them and will do the job as long as you ensure strong bonding to existing glass by pre sanding around the ding. The full glass job is usually stronger as it provides a cloth glass reinforcement around the ding.
