Hold the watch firmly in the palm of your hand and with the tool in the other hand, rotate the whole tool in an anti-clockwise direction and loosen the watch case back. Once loosened, continue to use Mr. Twister until the case back is removed. Take care not to lose the rubber gasket which is sandwiched between the screw-down case back and the watch case as this is used to keep the watch dust free and, in many models, water resistant.
Full Answer
What tools do I need to repair a watch?
[Article]10 Essential Tools Every Watch Repairer Needs
- Size 2 This will be for picking up heavier pieces. ...
- Size 3 These are finer than size two and are useful for general purpose when working on wrist watches.
- Size 5 This size will have extremely fine tips and are most useful when working on watch escapements and manipulating hairsprings.
- Size AM.BR
What are the best watch repair tools?
View The Best Watch Repair Kit Below
- SE 16-Piece Watch Repair Tool Kit. The SE 16-Piece Watch Repair Tool Kit is a great place to start in your search. ...
- Ohuhu 156 PCS Watch Repair Tool Kit. Take your watch repairing to the next level with the Ohuhu 156 PCS Watch Repair Tool Kit. ...
- EZTool Watch Repair Kit. ...
- HAOBAIMEI 168 PCS Watch Repair Kit. ...
- Vastar 151 PCS Watch Repair Kit. ...
What tools are typically included in a watch repair set?
Watch repair kits are professional quality kits that contain all the tools that you need in order to fix a watch. Tools include a watch case holder, a watch case opener knife, a back pry opener, spring bar tool, link remover, a selection of precision screwdrivers and other items. The tools are usually presented in a zipped carrying case.
How to use some basic watch tools?
- Screwdrivers
- Tweezers
- Movement Holder
- Loupe
- Watch Case Tools
- Watch Hand Removing and Fitting Tools
- Peg Wood
- Rodico
- Demagnetizer
- Digital Calipers
What tools are used for watch repair?
12 Essential Tools for your Watch Repair KitWatch Case Opener.Watchmakers Screwdriver Set. ... Watchmakers Tweezers. ... Eyeglass or Eye Loupe. ... Watch Hand Lifting Levers. ... Movement Holder. ... Parts Container. ... Pegwood.More items...•
How do you use a watch opening tool?
0:443:37How to Open a Screw Down Watch Back with a Case Wrench - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd tighten the holder until it holds the watch case. Securely. Now you need to make sure the caseMoreAnd tighten the holder until it holds the watch case. Securely. Now you need to make sure the case wrench fits securely in the notches of the case back using the thumb screw control between the tips.
How do you use a watch screwdriver?
0:070:51Reversible Screwdriver Set of 7 For Watch and Jewelry Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you'll always have the screwdriver you need on hand the blades are reversible. And can easily beMoreSo you'll always have the screwdriver you need on hand the blades are reversible. And can easily be changed by loosening and tightening the nut at the end of the screwdriver. Extending.
How do you use a 3 prong wrench on a watch?
1:318:57Using a 3 Prong Watch Case Wrench Opener - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey're adjusted by turning either the handle which moves the single pin on the bottom backwards orMoreThey're adjusted by turning either the handle which moves the single pin on the bottom backwards or forwards. Or the two pins on the top which are moved.
How do you open watch back with tools?
0:151:53How to Open a Watch Back Multiple Types - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese. There are several different ways to open a screw-off watch case back you can use a jocksMoreThese. There are several different ways to open a screw-off watch case back you can use a jocks wrench a regular watch case wrench or a case ball.
How do you open the back of a watch with notches?
0:453:31How To Unscrew A Watch Back With Scissors (No Case Wrench Needed)YouTubeStart of suggested clipEnd of suggested clipI'm going to squeeze the handles together and put apply some pressure downwards. And I'm going toMoreI'm going to squeeze the handles together and put apply some pressure downwards. And I'm going to turn counterclockwise. And hopefully I can unscrew. This let's see let's try I'm just gonna.
How do you open the back of a watch without the tool?
Using a Rubber Ball on a Screw-Back Watch. Purchase a soft, mashable rubber ball. Rubber balls often have enough grip to pry off watch backings. Choose a rubberized ball that is both squishy and tacky so it can latch onto your watch's back.
What size screwdriver do I need for a watch?
But many watch bracelets have screws for which you need a screwdriver with a size of 1.4-1.8mm. Worth adding is that the vast majority of watch bracelets use T-screws.
How do you remove the back of a watch to replace the battery?
0:212:33How to Open a Snap Off Watch Back - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse it like a lever to pop the back open gently push the handle away from the watch back the backMoreUse it like a lever to pop the back open gently push the handle away from the watch back the back will pop loose. And you will be able to remove it with your fingers.
How do you use a watch clamp?
2:575:22How To Close A Snap Off Watch Back With A Watch Press (Tutorial)YouTubeStart of suggested clipEnd of suggested clipAll that you have to do is grab. The watch press like this and then squeeze it down together. OkayMoreAll that you have to do is grab. The watch press like this and then squeeze it down together. Okay now with most watches you will here the watch back snap.
How do you open the back of a watch with notches without tools?
5:589:05How to Open a Watch Case With Common Household Items Without ...YouTubeStart of suggested clipEnd of suggested clipYou can use alternatively small precision screwdriver. But I prefer this because give me moreMoreYou can use alternatively small precision screwdriver. But I prefer this because give me more leverage. Even if it doesn't have you just on that spot and you pry it open.
How do I open my watch to replace the battery?
0:102:54How to Save Money Replace Watch Battery with Simple Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a plastic ring that goes around the covers the battery. So just take that and pop it outMoreThere's a plastic ring that goes around the covers the battery. So just take that and pop it out with a pair needlenose pliers.
How do you pop open the back of a watch?
0:382:33How to Open a Snap Off Watch Back - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse it like a lever to pop the back open gently push the handle away from the watch back the backMoreUse it like a lever to pop the back open gently push the handle away from the watch back the back will pop loose. And you will be able to remove it with your fingers.
How do you open a screw back watch without tools?
2:325:35How To Open A Screw Down Watch Back WITHOUT The Right ToolsYouTubeStart of suggested clipEnd of suggested clipAnd you apply some pressure downwards towards the back of the watch and you twist counterclockwise.MoreAnd you apply some pressure downwards towards the back of the watch and you twist counterclockwise. Just like that you can unscrew. You can loosen and unscrew. The back of the watch.
How long do watchmakers screwdrivers last?
Purchasing a good quality set of watchmakers screwdrivers will be the best investment you can make. If you look after your screwdrivers they can last a lifetime.
How many times magnification do you need for a watch?
No need to panic, you will only really need 2 types: General Eyeglass (3 - 4 times magnification) Inspection Eyeglass (10 - 12 times magnification) Your general eyeglass is used most of the time for dismantling and reassembling your watch.
Why do you need a part container for a watch?
But more importantly they should have a cover which prevents any dust or debris landing on the watch parts after they have been removed and cleaned.
What is a watchmaker tweezer?
Watchmakers tweezers are very different from regular cosmetic tweezers. They have very precise ends that close perfectly together and are easy to operate.
What does a number on eyeglasses mean?
Good quality eyeglasses are numbered eg. No. 1, No. 2.5 etc. This number corresponds to the focal length so a No. 1 means you would focus 1 inch from the object and a No. 2.5 would be 2.5 inches from the object. The closer you are to the object the greater the eyestrain so it is best to work at a good distance for as much time as possible.
What is the first thing you need to repair a watch?
1. Watch Case Opener. The first addition to your watch repair kit should be a case opener. Before you can even get inside a watch to see what may be causing a problem or just to undertake a regular service you need to remove the back and/or front of the watch.
What is the purpose of an eyeglass?
Your general eyeglass is used most of the time for dismantling and reassembling your watch. The inspection eyeglass is only used periodically for getting a closer look at pivots, jewels or for closer inspection.
How to remove scratches from plastic watch?
Removes scratches from plastic crystals. You put some poly watch on some cloth and wipe the crystal scratches right out of the plastic crystal .
How many pieces are in a watch staking set?
Deluxe watch staking set with 120 pieces and stand. Click the picture for better view. Comes in a wood box with a glass top. There are many pieces to this assortment to do any watch repair staking tasks.
How to remove push pins from watch bands?
This is one of the most popular system for removing push pins from metal watch bands. The side of the watch slides into the wooden slots and then use the pin with the small hammer to remove the watch band links .
What is a stand up Rolex watch opener?
Stand up style Rolex watch opener with multiple sized dies to open oyster style watches. This is the preferred opener compared to the flat style as the watch gets locked into position so there is less chance of slipping and scratching the watch.
What is the size of a Rolex watch case opener?
This opener comes complete with six dies with the measurements of 29.50mm + 28.30mm + 26.50mm + 22.50mm + 20.20mm + and 18.50mm.
What is a spring bar tool?
Spring bar tool, to remove leather watch bands from the head of the watch. The actual style on these may vary from the picture, but one end has the pusher and the other end has the fork split to release spring bars and band from the watch.
How many prongs are in a pocket watch key set?
Set of two 5 prong pocket watch key set. This covers 10 sizes of the most common size keys needed for key wound pocket watches.
16PCS Watch Repair Tool Kit
Buy best price professional 16pcs watch repair tool kit for repairing watches and replacing batteries, including phillips screwdrivers, pin punches, tweezers, spring bar remover, hammer, watch case opener knife, slotted screwdrivers, long nose pliers, etc., portable and practical.
30PCS Watch Repair Tool Kit
Portable 30pcs watch repair tool kit for sale, includes screwdrivers, tweezers, spring bar remover, adjustable case opener, pin punches, watch case holder, watch back pry opener, etc. The best watch repair kit meets all your needs for repairing watches.
37PCS Watch Repair Tool Kit
Professional 37pcs watch repair tool kit with low price for sale, includes pin punches, spring bar remover, hammer, watch pin link remover, screwdrivers, adjustable case opener, long nose pliers, etc. The watch repair kit is the best tool set for repairing watches.
143PCS Watch Repair Tool Kit
Economical price 143pcs watch repair tool kit for sale, includes watch strap spring pins, screwdriver, pin punches, tweezers, spring bar remover, adjustable case opener, hammer, leather carry case, etc., a professional watch repair tool kit is the best hand tool for repairing and assembling watches.
147PCS Watch Repair Tool Kit
Reasonable price professional 147pcs watch repair tool kit for sale, includes watch strap spring pins, screwdrivers, pin punches, tweezers, spring bar remover, adjustable case opener, hammer, watch case holder, watch case opener knife, etc. A best watch repair kit meets your different needs for repairing watches.
149PCS Watch Repair Tool Kit
149pcs watch repair tool kit contains hand tools and accessories for repairing and assembling watches, including spring bar remover, watch back pry opener, tweezers, hammer, screwdriver, adjustable case opener, watch pin link remover, watch strap spring pins, etc., practical and easy to carry.
151PCS Watch Repair Tool Kit
Buy professional 151pcs watch repair tool kit with low price, including watch strap spring pins, screwdrivers, pin punches, tweezers, spring bar remover, adjustable case opener, hammer, watch case holder, watch case opener knife, etc., a carry case available. The watch repair kit meets all your needs for repairing watches.
What is a jeweler's loupe?
Loupe: A jeweler’s loupe is available in some kits help you to better focus on tiny watch parts. Magnification can vary here, usually from 3x to 10x. The more compact the watch, the higher a loupe magnification you should shoot for.
What type of screwdriver should I use for a watch?
Screwdrivers: A kit should contain multiple screwdrivers — preferably both flat edge and Philips — to handle the variety of tiny screws you run across in your watch repairs. Anti-magnetic screwdrivers are safer to use for the watch. The kit receives bonus points for including extra screwdriver heads in case you break one.
How many pieces are in a 52mm case opener?
151 pieces in all, including multiple sizes of replacement spring pins. Screwdrivers and tweezers are anti-magnetic. Includes an instruction manual. 52mm case opener can handle over-sized watches.
How much does a watch repair kit cost?
Watch repair tool kits are generally moderately priced. The majority are between $15 and $25, with a few reaching up to $40 or slightly more.
What can you use a watch repair kit for?
The tools in a watch repair tool kit can also be used to repair eyeglasses and similar items with small parts.
What is a pin punch?
Pin punch or pusher: For removing difficult spring pins in a watch band.
How many pieces are in a watch repair kit?
This is actually a big deal since some of these kits contain 150+ pieces.
What is the No. 3 handle?
3 in the first photo is a handle with a set of three lantern chucks for holding screws of different sizes to allow trimming, finishing and polishing the ends of screws. It is nothing to do with polishing the heads.
What is Picture 3 in a box?
Picture 3 in a box on its own is a poising tool. See here http://www.ebay.co.uk/itm/WATCHMAKERS-DRGM-POISING-TOOL-/252373690122?hash=item3ac2a4e70a:g:-CkAAOSwJQdXCjIy
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
