my pendrive is not working how to repair it

Full Answer

How to fix pen drive not working?

Run disk checking to check & fix errors If your pen drive is not working suddenly, you can run disk checking to settle pen drive detected but cannot be opened issue. In File Explorer, right-click your pen drive and choose “Prosperities”. Then click on “ Tools ” tab and click “ Check ”. After checking, you can try to open the pen drive again.

Why won’t Windows 10 open my pen drive?

Windows assigns the drive letter to pen drive or USB dynamically so that a drive that was labeled as F drive might be labeled as G if another drive is connected. Then, you may be unable to open your pen drive/USB flash drive. To fix this problem, you can change pen drive’s drive letter. Let’s see how it works: 1.

What should I do if my USB drive is not working?

If your drive isn't working because of an improper formatting or corrupted data, you can reformat your drive—but keep in mind that reformatting your USB flash drive will erase all files on it.

How to fix corrupted USB drive/SD card/pen drive?

Below is how to fix a corrupted USB drive/SD card/pen drive using CMD (Diskpart service). Open the CMD window and type the following command and press enter after each. list disk: a list of all the storage devices connected to your computer will be displayed.

How can I make my pendrive work again?

Fix related error on the USB drive and make it recognized:Recover files and format RAW USB.Update unallocated USB drivers and create a new volume.Change the USB drive letter.Check USB port, change USB connection.If none of the above fixes work, take USB to a local device repair center for manual repair.

How can I recover my dead pendrive?

If your computer can recognize the dead flash drive, then you can use data recovery software like Disk Drill:Download and install Disk Drill.Connect your dead flash drive to your computer.Launch Disk Drill and scan the dead flash drive.Preview & select files for recovery.Recover selected files to a safe location.

Can we repair pen drive?

For software or driver issues, you can scan and repair your flash drive using your computer's built-in repair utility. If your drive isn't working because of an improper formatting or corrupted data, you can reformat your drive—but keep in mind that reformatting your USB flash drive will erase all files on it.

Why is my pendrive not showing?

Update/reinstall driver. When there is something wrong with your device drivers, it's possible your pen drive will not show up in Windows File Explorer or Disk Management. To exclude this cause, you can either update your device driver by following method 1 in situation 1 or reinstall your device driver: Step 1.

Can a corrupted USB Be Fixed?

If the USB drivers are corrupted or out-of-date, reinstalling them or updating them can fix the issue. Right-click the Start icon and click on Device Manager. Expand the dropdown for Disk drives, right-click your USB, and click Uninstall device. Unplug your USB then plug it back in.

How do I know if my pendrive is damaged?

First of all, you can check the pen drive or SD card for disk errors. To do so, double click “My Computer/This PC” to open File Explorer, then right-click the damaged pen drive or SD card, click “Properties” and go to “Tools”, finally hit on “Check” to scan this drive for file system errors.

How can I recover my corrupted pen drive without formatting?

Solution 1: Recover data from flash drive using CMDOpen CMD. You can press Win + R to summon the Run window, then type cmd.exe and click OK.Check if your drive has bad sectors. ... Type Y if the drive is in use and hit Enter key to proceed.Get the deleted files back.

What happens if a pen drive is not detected?

Fixing pen drive not detected error may lead to data loss. For example, formatting or changing the drive letter are common scenarios that result in data loss. At this juncture, you need a recovery tool that has the power to restore your data. Recoverit Data Recovery is easier to use, with laid down steps.

Why is my pen drive not opening?

When your pen drive is detected but not opening, there is a possibility that the drive is in RAW format. You need to convert it to a compatible file system to use it. Right-click on the 'Start' icon and key in 'Computer Management' then click on it. Go to the 'Disk Management' and figure out your drive device.

How to change the letter of a USB drive?

To change the drive letter, right-click on the 'This PC' button and select the 'Manage' option. Go to the 'Disk Management' to see your USB device. Then select the 'Change Drive Letter and Paths' option. Next, choose a new drive letter and click 'OK'. Your USB drive should be operational with a new drive letter.

How to uninstall USB drive?

If your USB drive was not correctly installed, you may require to properly install it once more. Open the 'Device Manager' tab. Click on the 'Universal Serial Bus Controllers' to expand it. Check out for your USB device that is not being detected. Right-click and click the 'Uninstall Device' option.

How to fix USB not detected?

Connect your USB drive to the computer once more to confirm its functionality. Solution 2. Unplug and Re-plug your computer. This is a simple way of refreshing your computer's operations to fix USB not detected issues. It will remove power from the computer and possibly reboot all the ports.

Why is my USB flash drive not reading?

This problem may result from a virus attack, physical damage, or power corruption. If the USB drive is not able to read a flash drive then it could be dead. A detailed repair may help restore it to use.

How to tell if USB port is faulty?

Remember your computer harbors several ports. Try them out by connecting your USB drive and switching to other ports. By this, you can immediately identify if there is a faulty port.

How to fix a flash drive that is not working?

If your drive isn't working because of an improper formatting or corrupted data, you can reformat your drive—but keep in mind that reformatting your USB flash drive will erase all files on it. Finally, if the flash drive won't work because of physical damage, you should take it into a tech department or data recovery professional; if that's not possible, you may be able to fix it yourself by soldering the broken USB drive's circuitry to a working USB cable. However, attempting repairs yourself is not recommended as there is a high risk of destroying the flash drive.

Why won't my flash drive work?

Finally, if the flash drive won't work because of physical damage, you should take it into a tech department or data recovery professional; if that's not possible, you may be able to fix it yourself by soldering the broken USB drive's circuitry to a working USB cable.

How to connect a USB flash drive to a Mac?

Connect the USB flash drive to your computer. Plug it into one of your Mac's USB ports.

How to format a hard drive?

Click Format. It's in the menu that appears when you right-click the drive. Doing so opens the Format window.

What to do if you choose to seek the services of a professional data recovery company?

If you choose to seek the services of a professional data recovery company, be sure to describe your problems to the best of your abilities to ensure they have the tools and experience for the job.

How to get to the menu on a flash drive?

Right-click your flash drive's icon. This displays a menu to the right of the drive.

Where is the Properties button on a drive?

Click Properties. It's at the bottom of the menu that appears when you right-click a drive.

What to do if pen drive is not working?

If your pen drive is not working suddenly, you can run disk checking to settle pen drive detected but cannot be opened issue.

How to solve pen drive detected but not opening issue?

To fix the issue effectively, figure out the condition of your pen drive and refer to corresponding solutions.

How to format a pen drive?

Step 1. Install and open it. In the main interface, right-click the pen drive that needs to be formatted and choose “ Format Partition ”. Step 2. In the pop-up window, choose an appropriate file system from drop-down menu. Then, click on “ OK ”. Step 3. Confirm formatting operation and click “ Apply ” >“ Proceed ” to perform this operation.

How to change the pen drive letter?

1. Open Disk Management: Click “Start”, right click “Computer” and go to “ Manage ” >“ Storage ” > “ Disk Management ”. 2. Find out where the pen drive is, right-click it and choose “ Change Drive Letter and Path…. ”. 3. In the pop-up window, click “ Change… ” and assign a new drive letter to the pen drive.

What happens if a pen drive is not showing up in File Explorer?

If the pen drive is detected but not showing up in File Explorer, you will not be able to open the pen drive in File Explorer. At this time, you can enter Disk Management to realize more information about the pen drive.

Why is my USB flash drive labeled as G?

Windows assigns the drive letter to pen drive or USB dynamically so that a drive that was labeled as F drive might be labeled as G if another drive is connected. Then, you may be unable to open your pen drive/USB flash drive. To fix this problem, you can change pen drive’s drive letter. Let’s see how it works:

Can I reformat a pen drive to a NTFS?

To reformat pen drive flexibly and effectively, you can employ a free yet powerful partition manager, AOMEI Partition Assistant Standard. It allows you to format RAW pen drive to NTFS, FAT32, exFAT, Ext2, Ext3 or Ext4 and breaks 32GB limitation, enabling you to format drive larger than 32GB to FAT32.

What to do if USB port is not working?

If your USB port is not working you could try blowing canned air into the port to see if that solves the problem. If not, the port might have to be replaced (which means a trip to your local PC repair shop).

What to do if USB isn't showing up?

If your USB device isn’t showing up, you can fix this by inserting the USB device and creating a new volume on the device. Do by following these steps:

How to recover data from a broken flash drive?

To recover data from a RAW USB device, you have options. One of the best options for broken flash drive data recovery is to make use of third-party software. One such tool is Disk Drill. Let’s find out how to get files off a broken flash drive with this tool.

Why is my USB drive unreadable?

Your USB drive might be unreadable, because of the assigned letter drive. To remedy this, insert the SD/USB device and change the drive letter by following these steps: Press the Windows key + X key combination. Click Disk Management.

How do USB sticks get damaged?

One of the most common paths to an unreadable card is when it’s been removed from a computer or laptop, without first safely ejecting the device. Do this once or twice, and you might be lucky.

Why is my USB stick not working?

Your USB stick might not be working because of a damaged file system, missing device drivers, malware or virus, or a broken circuit board.

What is a data recovery specialist?

Data recovery specialists are remarkably adept at salvaging data, even from disks and devices that might seem too far gone for recovery. If you don’t have anyone in your city who specializes in data recovery, you can also take the task to an online service. There are quite a few such services, such as the CleverFiles Data Recovery Center, that can help you recover data from a seemingly impossible situation.

Why is my USB drive not detected?

Another reason that could cause the ‘drive not detected’ issue is if the drive letter assigned to the USB drive is already occupied by another drive on the computer (or the letter on the USB is missing).

Why is my USB flash drive not showing up?

If a driver is missing, outdated, or corrupted, your computer won't be able to load your USB drive. USB driver issue, drive letter conflicts, and file system errors, etc. may all cause your USB flash drive not showing up on Windows PC.

Why is my USB drive showing unallocated space?

If your USB drive is showing as 'unallocated space' in the Disk Management utility, then it could be that the driver is out of date or corrupted. To fix this you'll need to install a new driver. Step 1. Connect the USB flash drive to the PC. Step 2.

What does it mean when a USB drive is RAW?

File system errors can render a USB drive RAW, meaning that it can't be read by a computer. In this situation, you'll need to recover the files from the drive first, then convert RAW to NTFS or FAT32 format so you can use it once more.

How to determine which fault has occurred and the current state of the drive?

To determine which fault has occurred and the current state of the drive, you'll need to use the Disk Management utility in Windows. This can examine the drive and give you further details of the solution required

Where to connect USB drive to PC?

Connect your USB drive to the rear ports on your desktop PC, which often provide more stable power supplies compared to the front ones

Can a USB drive be unusable?

As you can see, there are a variety of ways that a USB drive can be rendered unusable. Hopefully, you've been able to recover your files by following the steps in this guide. But we also recommend that you make regular backups of your data and be sure to eject drives properly from your PC each time you're finished with them.

How Can I Fix my Flash Drive Not Recognized?

Question: " My USB flash drive is not recognized when I plug it to the computer. What causes such a problem to happen? Is my USB drive got broken? How to fix the flash drive not recognized issue? Also, can I recover data from the USB flash drive not recognized? "

How to check if flash drive is working?

Way 1: Scan Flash Drive to Find the Issue. Plug the flash drive into your USB port. Go to My Computer and right-click on the flash drive. Open the Properties. Open the Tools tab and click Check now "¦. It may take some time to complete the scan. Once finished, it will tell you what the flash drive's problem is.

What to do if you find something missing on a flash drive?

You should also check if there is any accidental data loss from the drive. Should you find things missing, use a flash drive data recovery tool to help you recover loss documents do this immediately before it is overwritten by new data.

How to format a flash drive?

Right-click on the flash drive and click on Format"¦, the Format window will pop up.

How to update USB driver software?

Expand the menu and right-click on the Generic USB Hub. Click on Update Driver Software"¦

Why won't my computer recognize my flash drive?

USB Formatting Issue : This is the most probable reason your computer could not detect your flash drive. The inability to format flash drive properly before the first use could cause problems later on. Driver Issue: The drivers may not be available, corrupted, or outdated which would make the flash drive not Recognized.

Where to find flash drives that need to be fixed?

You will be able to find the flash drives that need to be fixed in the left panel.

What to do if pen drive is not showing?

If the pen drive is still not showing in my computer after you operate all the above steps, you need to recover your data and create a new volume to make your device usable again. To retrieve data from an inaccessible device, you can use the reliable hard drive recovery software - EaseUS Data Recovery Wizard. It will easily retrieve your important data from the pen drive or any other external USB devices since it can still be detected by Windows. In addition to recovering data from an inaccessible device, EaseUS Data Recovery Wizard can also perform deleted file recovery, formatted data recovery, RAW drive recovery, and more.

Why is my pen drive not showing on my computer?

At most times, pen drive detected but not showing in my computer error happens because USB driver is not installed properly which is considered as one of the most widespread failures occurred on USB flash drive devices.

How to update pen drive driver?

To exclude this cause, you can either update your device driver by following method 1 in situation 1 or reinstall your device driver: Step 1. Connect your pen drive to your computer, right-click "This PC", and choose "Properties" > "Devices Manager". Step 2.

Why won't my phone show up on my computer?

If your device is damaged or dead, it won't show up on your computer. Besides, you will not be able to recover data using a data recovery software tool since the device cannot be detected. In this case, you will need manual data recovery services in order to rescue your data. You may be interested in data recovery cost if you are considering manual repair.

Is my USB drive still detectable?

Congratulations, your USB drive is still detectable by the computer, which makes the problem less serious. Generally, if the pen drive is not showing up under File Explorer but can be seen in Disk Management, it will: Be marked as unallocated space. Or be shown as a volume without a drive letter.

Can you create a new volume on a pen drive?

After getting back all your files, you can now create a new volume on your pen drive to make it ready for data storage.

Is easeus a good recovery tool?

EaseUS Data Recovery Wizard is the best we have seen. It's far from perfect, partly because today's advanced disk technology makes data-recovery more difficult than it was with the simpler technology of the past.