windows 10 how to startup repair

How to run Windows 10 startup repair using command prompt?

How to Run Windows 10 Startup Repair Using Command Prompt

• User Case. “Guys please help I have a laptop and I've been having the blue screen of death recently and I don't know what's causing it.
• Instructions to Open Command Prompt. ✩ Press and hold the power switch on the computer case for about 5 seconds until the computer is completely shut down.
• Quick Solution for Windows 10 Startup Problems. ...

How do I launch a startup?

• Use the Windows key + R keyboard shortcut to open the Run command.
• Type the following command to open the Startup folder and press Enter: shell:startup
• Click OK.
• Use the Windows key + R keyboard shortcut to open the Run command.

More items...

What you should do if Windows fails to start?

What to do when “Windows fails to start” issue appears?

• ▌ Solution 1. Remove any hardware you recently installed. ...
• ▌ Solution 2. Verify your PC detects the boot disk and is booting from it. ...
• ▌ Solution 3. Use the Last Known Good Configuration to start Windows. ...
• ▌ Solution 4. Launch Startup Repair. ...
• ▌ Solution 5. Fix “Windows failed to start” with BCDEDIT command. ...
• ▌ Solution 6. Fix damaged MBR. ...

How to fix Windows 10 startup problem?

Windows 10 and 11 offer other methods for booting into Safe Mode. In Windows 10, go to Settings > Update & security > Recovery. In the Advanced Startup section, click the button for Restart now. In Windows 11, go to Settings > System > Recovery. In the Advanced Startup section, click the button for Restart now.

How to start up repair on Windows 10?

The Tutorial to Launch Startup Repair in Windows 10. Step 1: Boot to Advanced Startup Options. Step 2: Click/tap on Troubleshoot. Step 3: Click/tap on Advanced options. Step 4: Click/tap on Startup Repair. Step 5: If prompted, select an administrator account to provide credentials for approval. Note: You will not be prompted for an administrator's ...

What is startup repair?

Startup Repair is a Windows recovery tool that can fix certain system problems that might prevent Windows from starting. Startup Repair will scan your PC for the problem and then tries to fix it to make your PC start correctly.

Where is startup repair located?

Startup Repair is one of the recovery tools in Advanced Startup options. This set of tools is located on your PC's hard disk (recovery partition), Windows installation media, and a recovery drive. The next content will show you how to run a startup repair on Windows 10 computer.

How to repair Windows 10 if it is corrupted?

If the installation of Windows 10 becomes corrupted, you should still be able to Run Startup Repair by using Recovery Drive or by forcing your computer into Recovery Mode. You will find below multiple ways to access the Startup Repair option in Windows 10. 1. Run Startup Repair from Settings. If you are logged into your computer, you can Run ...

Where is the startup repair button?

If you are unable to Login to your User Account, you can access Startup Repair option by using the Power Options menu located at the bottom-right corner of your screen.

How to fix a computer that is stuck on the start button?

2. After computer restarts, click on Troubleshoot > Advanced options > Startup Repair. 3. Run Startup Repair Using Keyboard Shortcut. This method can be helpful, if your computer is stuck or if the Start button is not working on your computer. 1.

How to repair a computer?

If you are logged into your computer, you can Run Startup Repair using the Settings menu. 1. Go to Settings > Update & Security. 2. On the next screen, click on Recovery in the left pane. In the right-pane, click on Restart now button located under Advanced Startup section. 3.

How to make a bootable USB drive for Windows 10?

If this does not happen, you will have to create a Bootable USB Windows 10 USB Drive by using another Windows 10 computer. 1. Shut down the computer by pressing the Power button. 2. Insert Bootable Windows 10 USB Drive into the USB port of your computer and Press the Power button to start your computer. 3.

How to start up Windows 10 when it is not loading?

1. Press the Power button to start your computer. 2. Before the Windows 10 loading screen appears, press the Power button again to Power OFF your computer. 3.

What happens if you restart your computer on the third restart?

During the third restart, your computer should enter into Windows Recovery Environment, where you will see your computer performing a number of diagnostic tests to fix booting problems.

What is startup repair?

Startup Repair is a Windows recovery tool that can fix certain system problems that might prevent Windows from starting. Startup Repair scans your PC for the problem and then tries to fix it so your PC can start correctly.

Where is startup repair located?

Startup Repair is one of the recovery tools in Advanced Startup options. This set of tools is located on your PC's hard disk ( recovery partition), Windows installation media, and a recovery drive.

Can startup repair fix a virus?

Startup Repair can only fix certain problems, such as missing or damaged system files. It can't fix hardware failures, such as a failing hard disk or incompatible memory, nor does it protect against virus attacks.

When to run a startup repair?

You will want to run a Startup Repair when you are experiencing these issues, but while it is early enough that no other issues have been caused as a knock on effect.

How to restart Windows 10 home screen?

If you still have access to the windows home screen, you can click Restart while holding down the SHIFT key. Or you can press the Windows+I keys together and choose General and select restart to advanced startup.

How to boot CD from Dell splash screen?

You can do this by tapping rapidly on the F12 key at the Dell Splash screen when the computer starts up and choose the CD or DVD drive from the Boot Once Menu that appears.

How to boot from a USB on Dell?

Tapping rapidly on the F12 key at the Dell Splash screen when the computer starts up and choose the CD or DVD drive from the Boot Once Menu that appears. You can do the same thing if you have a USB recovery drive, choose to boot from the USB instead.

What disk to boot to system recovery options?

Boot to the System Recovery Options screen using your Windows Vista installation disk or computer repair disk.

What does automatic repair do?

The Automatic Repair will start Diagnosing your personal computer, and it attempts to automatically repair them.

How to get to Advanced Options screen on Dell?

Tap rapidly on the SHIFT+F8 key together as the computer goes past the Dell Splash screen and it may bring up the Advanced Options screen.

Why is my Windows 10 startup repair not working?

As you can see, the problem of Windows 10 startup repair not working can be caused by damaged, invalid or deleted system files. This software can help you create a system image backup so that you can restore system to a normal state when problems occur. What’s more, you can use AOMEI Backupper to create a bootable device for recovery before accidents happen.

How to boot into safe mode in Windows 10?

When you are in Windows Recovery, select Troubleshoot -> Advanced options -> Startup Settings. From there, press the 6) key to boot into Windows 10 safe mode with command prompt on next restart.

What is bootrec.exe?

Bootrec.exe is a standard free utility designed to troubleshoot boot problems in the Windows Recovery Environment. If the Windows 10 Startup Repair not working, you can try to fix Windows 10 with BootRec commands.

What is SFC in Windows 10?

SFC (System File Checker) is a command-line utility that can scan for corruption in Windows system files and replace any corrupted or missing protected system files with a known good version. In the Command Prompt, enter the following command and press enter.

Can you restore a system with dissimilar hardware?

Tip✍: If you want to restore system with dissimilar hardware, you can enjoy “Universal Restore” feature in AOMEI Backupper Professional or other advanced versions.

How long does it take for Windows to fix a startup problem?

Windows will take anywhere from a few seconds to a few minutes to attempt to fix the problem. (It may not be able to.) If you don't actually have a startup problem, it will also say it can't fix the problem.

How to fix Windows 10 if it won't boot?

Method 1: Use Windows Startup Repair. If Windows 10 is unable to boot up and takes you to the login screen or the desktop, your first step should be to use Startup Repair. Here's how: 1. Navigate to the Windows 10 Advanced Startup Options menu.

Why is my Windows 10 computer not working?

Your Windows 10 problems may stem from a corrupt file. If you can boot into the operating system — even if you have to boot into safe mode — you should perform a file scan to check for problems.

Does Windows 10 have a reset feature?

Instead, Windows 10 provides a built-in reset feature which takes your computer back to the way it was before you had any software, special devices or data preloaded. On a side note, if you're giving your computer to someone else, resetting is a good way to wipe it.

Why is my Windows 10 startup repair not working?

As you see, the Windows 10 Startup Repair not working problem can be caused by corrupted, invalid or deleted system files. Therefore, it’s important for you to create a system image backup so that you can restore system to a normal state when problems occur.

What is startup repair?

Windows 10 has its own repair tools, and Startup Repair is the frequently-used one. You can use Startup Repair to scan and repair some PC issues like damaged/corrupted system files or invalid boot files. If your Windows 10 won’t boot, you can use installation disc or system repair disc to boot into Advanced options, ...

How to check if a file is corrupted?

2. In the Command Prompt window, type chkdsk C: / f /r and press Enter to check your system partition for corrupted, invalid or deleted system files.

How to stop auto restart on Windows 10?

2. On the Startup Settings screen, press 9 or F9 to choose Disable automatic restart after failure.

What is a Windows 10 11 repair loop?

Windows 10/11 Startup Repair loop is also known as Windows 10/11 Startup Repair stuck. When you encounter this error, Windows 10/11 will boot again and again into Startup Repair and present an endless loop, so that you cannot access anything else on the computer.

What to do if Windows 10 won't boot?

If your Windows 10 won’t boot, you can use installation disc or system repair disc to boot into Advanced options, and then perform a Startup Repair. However, some users find Windows 10 Startup Repair not working sometimes. Here are two most common cases: Case 1: Windows 10 Startup Repair loop. Windows 10 Startup Repair loop also can be called ...

What command to run to repair a file?

You can run the sfc /scannow command ( System File Checker) to repair system files.