Full Answer
How do you fix a ripped bounce house?
If the material in your bounce house is torn, you can repair it with a patch. You can purchase a vinyl repair kit or use the one that came with your bounce house. A vinyl repair kit has patches made from tough material that can resist punctures and tears and an adhesive that will bond to the vinyl in your bounce house.
What kind of glue do you use to patch a bounce house?
vinyl cementSimply apply the vinyl cement to the cleaned area on the unit and also on the secondary vinyl (patch or what you are gluing to the inflatable). The vinyl cement needs to dry for a couple of minutes to become tacky then apply together with pressure for a few minutes.
Are bounce houses a good investment?
How much profit can an inflatable bounce house business make? Industry research indicates an average of 1.5 rentals per week, which comes out to $188 per week per bounce house. If you invest in 4 bounce houses, your business will draw in about $750 per week.
How do you find a leak in a bounce house?
0:044:31How to Check & Repair Air Leaks for your Inflatables - YouTubeYouTubeStart of suggested clipEnd of suggested clipFull of dish soap and water and then spray the entire piece down looking for bubbles.MoreFull of dish soap and water and then spray the entire piece down looking for bubbles.
Can You Use Flex Seal on a bounce house?
0:021:532018.10.14 - Using flex-seal tape to fix bouncy houses - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just apply that right in there and it sticks all the time keeps all that air from coming out andMoreWe just apply that right in there and it sticks all the time keeps all that air from coming out and it's got a nice clean.
How do you repair vinyl inflatables?
2:225:08Repairing Inflatable Pin Holes, Punctures, and Tears - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe patch still wet with glue is carefully pressed over the puncture and massaged into place afterMoreThe patch still wet with glue is carefully pressed over the puncture and massaged into place after letting the glue cure the toy is ready to be inflated.
Can bounce house Blower get wet?
The bounce house may be able to get wet, but the blower and electrical cords can not. Water getting into the blower could damage the unit, it's best to keep water away from it. Be careful covering the blower completely though.
Are water slides a good investment?
20 April 20 - Why Water Slide Rentals are a Great Investment for Your Party. When planning an outdoor party but don't have a beach or pool nearby, unique water slide rentals in Houston can save the day. The inflatable industry across the world is predicted to hit $5.72 billion in 2021 and for a good reason.
Can you patch a bounce house with Gorilla tape?
0:000:38How to Repair an Inflatable with Gorilla Waterproof Patch & Seal TapeYouTubeStart of suggested clipEnd of suggested clipHaving located the leak first you need to make sure the area is clean by giving it a wipe roughlyMoreHaving located the leak first you need to make sure the area is clean by giving it a wipe roughly measure your gorilla waterproof patch and seal tape black.
How do you repair a nylon bounce house?
Vinyl bounce houses are fixed with vinyl glue, while nylon bounce houses are fixed using a sewing kit. Because nylon is basically fabric, you can treat it as such and stitch a nylon bounce house just as you would a torn jacket.
Can you use epoxy on inflatables?
3:304:16How To: Inflatable Repair Adhesives Guide - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll want to use G flex epoxy G flex is a very strong and flexible epoxy that will stick to justMoreYou'll want to use G flex epoxy G flex is a very strong and flexible epoxy that will stick to just about anything as long as the surfaces are prepared properly.
How do I prevent rips and tears in my Bounce House?
Choose an appropriate site that is free of sticks and rocks - Store your bounce house properly - Set rules for children, including a no shoe policy.
How much does it cost to repair a Bounce House?
Vinyl Repair Kits, Sewing Awls, and other tools you may need will ultimately determine the total cost. For a rough estimate, let’s call it $10-30....
How do I repair any netting on the Bounce House?
You could sew the netting back together with the right equipment (needle, string, etc).
Listening for a leak
Listening for the sound of air escaping is a bit impractical. There will invariably be noise that is out of your control, like a car driving by or the sounds of kids playing (and not on the bouncy castle you hold in your hands).
Feeling around for a hole
Feeling around the side walls and the entire structure is tedious, but effective. What you are looking for are underinflated areas that just don’t seem to be keeping up with the rest. Once again, this is best to do inside a windless area, like your garage or basement. Make sure to shut any open doors as you don’t want a draft rolling through.
Using soap and water
If all else fails, you’re going to want to turn to soap and water. Some folks recommend mixing in some glycerin, which is useful for retaining the effectiveness of the bubbles you’re about to create - using a detergent helps to lower water’s surface tension, which in turn enables bubbles to last longer.
The Vinyl Patching Process
Patching up a vinyl bouncer takes some time, but it is at least a straightforward process, considering that over half of your effort is often spent just finding the leak. For starters, you’re going to need a Vinyl Repair Kit. And, maybe some lemonade to cool down some of the frustration from locating the hole to begin with.
Sewing a seam
Sometimes the stitching on an inflatable pool & water slide frays from repeated soaking. Whereas other times, careless teenagers jump all over the toddler bounce house you specifically told them not to jump on because they weigh too much.
Other Questions You May Have
You could sew the netting back together with the right equipment (needle, string, etc). Or, if you’ve ever taken the Coast Guard Boating Safety Course, you’re probably pretty handy tying ropes.
Price Estimates
Storage Fee: $10 per day per unit (after the first three days after your unit is repaired)
PATCH
The standard prices listed above are just a few of our most common repairs. The prices provided in the free quote form are an approximation. The price may change based on the repair's location and size, and after we see the inflatable in person.
How big of a damage to an inflatable bounce house?
If the damage to your inflatable is larger than 6 inches, we recommend having it repaired by a professional bounce house repair center.
What is a Magic Jump Repair Kit?
Our Repair Kit provides a fast and easy solution for small cuts and punctures. Your order of a Magic Jump Repair Kit includes multi-colored vinyls and 8-ounce vinyl cement. Make sure to have this Repair Kit handy when accidents happen.
How to contact Magic Jump Inc?
website visitors. If you are a bouncer repair company and would like to be included in this list of inflatable repair centers, please contact us at 818.847.1313 or email us at [email protected].
