How do you repair a broken concrete driveway?
How to Resurface a Concrete DrivewayRemove debris. If a crack is less than a quarter-inch, it's a prime candidate for simple resurfacing. ... Wash the driveway. Wet down the driveway with a pressure washer. ... Mix concrete and water. ... Fill the cracks. ... Let dry. ... Resurface. ... Prevent slips. ... Watch the video above to learn more!
Is a new concrete driveway worth it?
In almost every case, it's worth the investment. A new driveway can increase your home's value while improving the aesthetics of your house and your neighborhood. Learn more about the benefits of a concrete driveway and how it enhances your home's curb appeal.
Do it yourself repair concrete driveway?
0:024:57How to Repair Broken Concrete on a Driveway - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're using a bashed concrete rotary hammer with bashed chisel this setup works great for smallMoreWe're using a bashed concrete rotary hammer with bashed chisel this setup works great for small concrete projects or to remove some old tile.
What is the cheapest surface for a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
Can you pour concrete over concrete?
You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.
Is it cheaper to concrete or pave?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Do all concrete driveways crack?
In theory, concrete that is formulated correctly for its use and placed on a well compacted, well engineered base, and finished perfectly, should never crack. But that rarely happens. So concrete usually cracks. That fact is the reason concrete contractors put "control" joints in large slabs of the material.
Can you repair cracks in concrete driveway?
As long as the rest of your driveway is sound (no heaving, sinking, or crumbling), you can replace those tiny cracks with a smooth concrete surface by applying a high-quality resurfacing product, such as Quikrete's Concrete Resurfacer.
How do you fix a large hole in a concrete driveway?
0:080:52How to repair driveway potholes with concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipMix the concrete a little soupier than usual. So it will fill the cavity well push. It in with yourMoreMix the concrete a little soupier than usual. So it will fill the cavity well push. It in with your shovel to make sure it gets in all around overfill the hole a little and then trowel off the excess.
How can I make my concrete driveway look better?
There are several ways to make your driveway more appealing, possibly becoming the envy of your neighborhood.Pressure Wash. ... Repair any broken pavers or bricks, fill any cracks. ... Add a border. ... Staining concrete driveways. ... Upgrade your driveway. ... Improve your landscaping. ... Lighting. ... Decorative Mailbox.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
How much does a driveway increase home value?
5-10%You may be considering if the driveway is worth cleaning up, or about adding one to your home. You may be surprised to learn that a driveway does add value to your home. On estimate a driveway can increase your property's value by 5-10%. That is quite a bit for an area you do not really need to pay a lot to revamp.
Does replacing driveway a good investment?
You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.
Does having a driveway add value to home?
How much value does a driveway add to a home? According to Property Price Advice, a driveway can add between 5 and 10% to your home's value.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How long should you wait to drive on a new concrete driveway?
7 daysAfter One Week – After 7 days, it's OK to drive on your new concrete with normal passenger vehicles. Avoid driving near or across the edges of the driveway, though, since those areas are still weaker.
How much does it cost to fix a crack in a concrete driveway?
The average cost to repair cracks in a concrete driveway is $0.50 to $3 per linear foot. Minimum service fees of $100 to $250 apply to patch, seal, and fix cracks. Driveway crack filler costs $5 to $10 per bottle to repair 24 linear feet of cracks less than a 1/4" wide yourself.
How much does it cost to repair a cobblestone driveway?
Repairing a cobblestone driveway costs $8 to $20 per square foot to replace individual stones and $3 to $5 per square foot for sand to fill and level sunken areas. Settling is the most common problem with cobblestone. Pros charge $6 to $12 per square foot to relevel large areas.
How old should a driveway be to replace it?
Age – Homeowners should consider replacing asphalt driveways older than 15 to 20 years and concrete driveways older than 25 years. After so many years, the foundation begins to deteriorate, and problems are more likely to recur even after repairs.
How much does it cost to replace brick pavers?
Brick pavers cost $0.50 to $1.80 per brick or $2 to $8 per square foot. One benefit of brick paver driveways is that damaged bricks can be replaced individually. Level sunken areas by removing the pavers, filling the space with sand, and compacting the sand until it's flat.
How much does it cost to level a driveway?
Driveway leveling costs $600 to $1,200 to lift a small sinking section or $1,400 to $2,700 to level an entire driveway. Filling and leveling small surface areas costs $2 to $5 per square foot. Sinking, settling, and buckling are caused by water damage, tree roots, and foundation problems.
How much does it cost to patch a pothole?
Filling or repairing potholes costs $100 to $400 on average, depending on the size, depth, extent of the damage, and repair method. Patching costs $25 to $40 per pothole plus $100 to $250 to bring the equipment and crew to the job site.
How much does it cost to install a concrete driveway?
A concrete driveway costs $1,600 to $6,400 to install or $4 to $8 per square foot on average. The cost to pour a new concrete driveway with decorative colors, borders, stamped patterns, and finishes is $8 to $18 per square foot. Old driveway removal adds $1 to $3 per square foot when replacing.
How much does it cost to remove a driveway?
Removing an old driveway costs $1 to $3 per square foot, including demolition and hauling away the debris. Removal costs depend on the size, conditions, disposal fees, and if the concrete is reinforced with rebar or wire mesh.
How much does stamped concrete cost?
Stamped concrete driveways cost $12 to $18 per square foot , depending on the number of colors and patterns. Stamped concrete, also called patterned or textured concrete, replicates the look of stone, brick, or tile. Installers use a texturized mat to imprint a pattern directly into the concrete.
How long does a concrete driveway last?
Concrete driveways last 30 to 40 years on average with proper maintenance. Exposure to freezing temperatures, extreme weather elements, and road salts reduces the driveway's lifespan. Pressure washing a driveway every few years helps it last longer.
How much does a concrete driveway apron cost?
Concrete driveway apron cost. Concrete driveway aprons cost $4 to $10 per square foot or $1,000 to $1,600 on average for a two-car driveway. A concrete apron is an 8- to 10-foot long section of pavement where the driveway meets the public street, and typically spans the driveway's full width.
How much does it cost to pour concrete?
Cost to pour concrete driveway. The average cost to pour a 1,000 sq. ft. concrete driveway slab is $4,000 to $8,000 or $4 to $8 per square foot, depending on the size, shape, and decorative finishes. Small driveways may cost more per square foot because most installers have a minimum job price. Cost to pour concrete driveway.
How much does a driveway permit cost?
A concrete driveway permit costs $50 to $200, depending on location. Most cities require a permit for new driveway installations, but may waive the fee if there's already a paved apron connecting the property to a public street.
Why is concrete better than other materials?
Concrete driveways offer several advantages over other materials because of their durability and uniform surface finish. But concrete in any form has a tendency to crack, leaving you with a choice: repair or replace.
Can you replace a crack in concrete?
Not all cracks warrant replacement, and repairing concrete is often straightforward if you're dealing with a hairline surface break. All that's required to deal with such a crack is a bag of cement, water and putty knife.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
What factors affect the cost of a concrete driveway?
Size and thickness are the primary factors that influence concrete driveway costs. The larger the driveway, the more material is required. A traditional rectangular driveway will cost less than a stylized one, like a curved driveway with brick pavers along the edges.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
