Repairing Guides

how much does it cost to repair a flash drive

by Shakira Nader Sr. Published 2 years ago Updated 2 years ago
image

If this method doesn’t work, your best bet is to take the flash drive to a specialist. How much does it cost to repair a broken flash drive? That depends on the extent of the damage. This can cost you anywhere from $150.00 to reattach broken pads to a connector to $300-$500 for “chip-off” recovery.

If there is physical damage to the USB flash drive and the flash drive must be repaired, the cost for recovery starts at $200 (e.g. reattach broken pads from a broken connector).Sep 6, 2021

Full Answer

How can I recover data from a damaged USB flash drive?

If the USB drive has nothing important on it, then a home flash drive repair is one way you might try to recover data. Any data recovery attempt can put your data at risk, and there is no guarantee a home fix will work. If your data is too valuable, then you should get the USB drive shipped to Gillware’s data recovery experts.

How much does it cost to repair a hard drive?

If your solid state drive qualifies for the $90 service, we will proceed with the repair. If your drive has more severe issues, we will contact you with other options, or you can elect to have it returned to you with no cost for the diagnostics. Evaluation We’ll check your device for free to see what the problem is and provide you a quote. Recovery

How can I repair my USB flash drive Windows 7?

3 How can I repair my USB flash drive? 7 You can sometimes fix the unreadable drive by enabling the device on the control panel’s device manager. One of the most frequent requests our data recovery experts get is to fix or repair USB devices, such as a corrupted flash drive, pen drive, USB stick, or a USB attached hard disk drive.

Is it possible to repair a broken flash drive?

That depends on how badly it’s broken. If it’s just a case or port issue, it’s possible. If the circuit board is broken, the likelihood of repair is greatly lessened. How do you fix a physically broken flash drive? How to fix a broken USB flash drive will depend on how badly it’s damaged. If necessary, follow these steps:

image

Can a USB flash drive be repaired?

For software or driver issues, you can scan and repair your flash drive using your computer's built-in repair utility. If your drive isn't working because of an improper formatting or corrupted data, you can reformat your drive—but keep in mind that reformatting your USB flash drive will erase all files on it.

Where can I get my flash drive repaired?

1:396:06How to Fix Corrupted USB Flash Drive and Recover Data? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnother way to fix corrupted usb drives though is to use the check disk utility. Check disk is aMoreAnother way to fix corrupted usb drives though is to use the check disk utility. Check disk is a command line based utility that is executed through the command prompt window.

How do I fix a faulty flash drive?

Method 2. Windows Utility - Check and Fix the Error on the Damaged USBConnect the USB to your PC.Go to My Computer/This PC and then the USB Drive.Right-click the USB drive and select Properties.Click on the Tools tab.Click the Check button.Step 6: Let the scan process complete, then close the scan window.More items...•

Why is my flash drive not showing up?

Reason Why a USB Flash Drive Is Not Showing Up The drive isn't seated properly in the port. The drive isn't on (this is rare, but some some models of USB drives have a physical power switch). The USB port on computer is bad. The USB drive itself is broken.

How do I fix an unreadable USB using CMD?

To repair files on a USB flash drive with CHKDSK:Open the start menu and type “cmd”. Hit Enter on your keyboard.Enter the following command (make sure to replace DRIVE_LETTER with the letter assigned to the hard drive you want to fix) and press Enter: chkdsk DRIVE_LETTER: /r.Wait for CHKDSK to finish.

How use SysTools pen drive recovery?

Simple 5 Steps to Recover Pen Drive Data:Step 1: Download & Run SysTools Pen Drive Data Recovery Software.Step 2: Connect your pen drive with your system.Step 3: Click on "Scan" or "Formatted Scan" Mode.Step 4: Preview recovered deleted data from Drive.Step 5: Click on "Save" to restore data at any location.

Can you recover files from a broken flash drive?

Yes, broken USB flash drive data recovery is possible using either the built-in Windows or macOS tools or a third-party solution. To do this with D...

Can a damaged flash drive be repaired?

That depends on how badly it’s broken. If it’s just a case or port issue, it’s possible. If the circuit board is broken, the likelihood of repair i...

How do you fix a physically broken flash drive?

How to fix a broken USB flash drive will depend on how badly it’s damaged. If necessary, follow these steps: Find an old USB cable Strip the newly-...

How much does it cost to repair a broken flash drive?

That depends on the extent of the damage. This can cost you anywhere from $150.00 to reattach broken pads to a connector to $300-$500 for “chip-off...

Why is my USB stick not working?

Your USB stick might not be working because of a damaged file system, missing device drivers, malware or virus, or a broken circuit board.

How do you fix a USB that won't open?

You can set the RAW partition as active with the following steps: Press the WIN+R key combination. When prompted, type diskmgmt.msc. Right-click on...

Why can't I see my USB drive in Windows 10?

Most likely the device has been physically damaged, the partition table is corrupt, or the drive has become RAW.

How do I know if my USB is corrupted?

Your USB flash drive is corrupted when it looks empty, appears as RAW, or the files stored on it are inaccessible.

Can a corrupted USB stick be Fixed?

There are many ways “to fix” a corrupted USB stick, but each might be a vastly different solution. If you’re dealing with filesystem corruption, tr...

Are there any USB Repair Tools working on Android?

Using USB sticks on Android devices never really caught on. With an almost non-existent target audience, app developers seem not to see a point in...

Is there any SanDisk USB repair tool?

There aren’t any SanDisk-specific USB repair tools. Most flash drive repair utilities which “fix” different types of problems are (usually) “vendor...

Are USB repair kits and USB repair tools the same?

Many people use the terms USB repair kit and USB repair tool interchangeably. Still, the term “kit” is mainly used for hardware. For example, a bro...

Which USB repair tool will fix my write-protected USB stick?

The way to deal with a write-protected USB flash drive depends on the particular USB stick: Is your USB stick the official media where software lik...

Can you recover a USB flash drive?

Yes, no matter what you call them, we recover 95% of the conventional USB devices we receive. We can repair most USB flash drives and recover your files. We’ll inspect your device under a microscope and determine how to proceed with your recovery case.

Do full size flash drives incur extra charges?

The majority of full size flash drives are conventional and do not incur the extra charge. If you are not sure you can send us a photo of your device. Recovery media is included but the size and type is our choice. You can always provide or purchase other media.

How to recover data from a bent USB drive?

To recover the data from a bent USB flash drive, our flash drive repair experts focus on fixing the tip of the USB drive. In other words, we need to repair the damaged USB plug connection. This is difficult and delicate work in itself, and can easily be done wrong by an inexperienced data recovery novice, making data recovery more difficult. But we don’t have data recovery novices tackling these cases—we have data recovery experts with tens of thousands of hours of experience between them.

How many pins are in thumb drive?

Thumb drives removed from their casing for USB flash drive recovery Top: The 48-pin NAND flash memory chip mounted to the thumb drive’s PCB. Bottom: The controller chip mounted to the underside of the PCB

What happens if you can't access thumb drive?

When you can’t access the data files on your thumb drive through its broken USB connector, there is a “Plan B.”. However, Plan B just happens to involve removing the heat pads, then the NAND chip itself, and piecing its data files together. It’s hard work, requires specialized tools and knowledge, the file recovery process is slow, ...

How to repair a thumb drive?

In cases where the connectors have been damaged, it takes an experienced electrical engineer to repair a thumb drive. Engineers use a soldering iron to carefully resolder the damaged connection between a flash drive and its USB connectors. If done wrong, the data files on your drive can become even harder to recover.

Why is my USB drive bent?

A bent USB drive is another very common occurrence, often caused by people sitting down and bending the drive in their pocket. The next time the customer goes to use the drive with their PC or Mac, they discover the media is damaged.

Can a thumb drive be monolithic?

The client in this data recovery case, unfortunately, did not own a monolithic thumb drive . When they accidentally bent their thumb drive while it was plugged into the USB port of a computer, the USB plug snapped right off and the customer couldn’t access the files.

Can a NAND chip be soldered to a thumb drive?

The NAND chip and its controller board are soldered pretty securely to the thumb drive’s control board. It would take an unusual display of force to dislodge them from the board without breaking the chips. But the USB plug that connects the device to your computer is a different story.

How to recover data from a broken flash drive?

To recover data from a RAW USB device, you have options. One of the best options for broken flash drive data recovery is to make use of third-party software. One such tool is Disk Drill. Let’s find out how to get files off a broken flash drive with this tool.

What to do if USB isn't showing up?

If your USB device isn’t showing up, you can fix this by inserting the USB device and creating a new volume on the device. Do by following these steps:

Why is my USB drive unreadable?

Your USB drive might be unreadable, because of the assigned letter drive. To remedy this, insert the SD/USB device and change the drive letter by following these steps: Press the Windows key + X key combination. Click Disk Management.

How do USB sticks get damaged?

One of the most common paths to an unreadable card is when it’s been removed from a computer or laptop, without first safely ejecting the device. Do this once or twice, and you might be lucky.

Why is my USB stick not working?

Your USB stick might not be working because of a damaged file system, missing device drivers, malware or virus, or a broken circuit board.

What is a data recovery specialist?

Data recovery specialists are remarkably adept at salvaging data, even from disks and devices that might seem too far gone for recovery. If you don’t have anyone in your city who specializes in data recovery, you can also take the task to an online service. There are quite a few such services, such as the CleverFiles Data Recovery Center, that can help you recover data from a seemingly impossible situation.

What happens if your USB port is bent?

If your USB port is bent or broken and you cannot manually repair it, you’ll probably have to buy a new PC (if it’s the PC port) or USB device (if it’s the USB device that’s bent or broken).

What Are USB Repair Tools?

Multiple solutions fall under the somewhat vague term “USB repair tools”. The term covers:

How to check for errors on USB flash drive?

Use chkdsk DRIVE LETTER /r /f , where DRIVELETTER is the one of your USB flash drive, to check for and try to repair any errors on it.

How to scan a USB drive for lost files?

Select your USB flash drive from Disk Drill’s device list. Ensure “All recovery methods” is selected from the pulldown menu on the right. Click on “Search for lost data” to scan your device for files.

What is disk drill?

Disk Drill is a powerful but straightforward file recovery application worth adding to your USB stick repair utilities collection. We’ll zip through it and use it solely for recovering files from a non-accessible USB stick. Still, you can find out more about Disk Drill in our comprehensive review of this fantastic app.

How to protect a USB flash drive?

To ensure the safety of the data in your USB flash drive, you should first take a complete backup of its contents, even if it’s unusable in its current state. That’s because if the problem’s source is your USB flash drive’s hardware (for example, its memory chips), more use translates to more wear and intensifies the problem. Having a backup will ensure that even if the situation gets any worse, you will still have options to recover your precious data.

Why is my USB stick write protected?

Is your USB stick the official media where software like Microsoft’s Windows 10 came on? Then, it might be write-protected on purpose to avoid accidental deletion of the operating system’s installation files.

How to run PowerShell with elevated privileges?

Press Windows Key + X to see Windows 10’s quick menu of administrative tools and, from there, run PowerShell with elevated privileges.

How can I repair my USB flash drive?

Knowledge of how to fix and repair a corrupted USB drive can save you a lot of work in redoing a project all over again. A USB pen drive works under the same memory principle as a computer hard drive. Before you try USB flash drive repair, you need to know what is causing the problem. This can mitigate future storage-related issues.

How to fix unreadable disk drive?

You can sometimes fix the unreadable drive by enabling the device on the control panel’s device manager. You simply go to start and then control panel in order to access the device manager. Enlarge the list next to the “disk drives option.”. Double click on the arrow facing downwards under this tab option to “Enable device.”.

How to rebuild a hard drive on a laptop?

Step 1 – Click on the “My Computer- Removable Disk” icon. Then right-click the “Properties” tab to the Removable Disk icon. Left-click the tools tab to select the button named “Rebuild” on it.

How to rebuild a USB drive?

Step 1 – Click on the “My Computer- Removable Disk” icon. Then right-click the “Properties” tab to the Removable Disk icon. Left-click the tools tab to select the button named “Rebuild” on it.

How to find a USB drive that is missing?

Step 1 – Attach the USB drive to your computer and press on the Windows button at the bottom left of your screen (this used to be called the Windows Start button). As soon as you see a popup, type diskmgmt.msc and hit enter. This will start Disk Management, which is great for detecting any missing drive.

How to use a pen drive in Windows 10?

Step 1 – Insert/connect the USB flash drive or hard drive into the computer system USB port. Step 2 – Windows 10 should automatically detect the USB flash drive. Then, go to the removable disk icon under the “My Computer” icon list. Step 3 Access the pen drive via right-clicking the properties tab, then click on the Tools tab using ...

How to get to disk management on Windows 10?

Step 1 – Attach the USB drive to your computer and press on the Windows button at the bottom left of your screen (this used to be called the Windows Start button). As soon as you see a popup, type diskmgmt.msc and hit enter. This will start Disk Management, which is great for detecting any missing drive.

How to fix a flash drive that is not working?

If your drive isn't working because of an improper formatting or corrupted data, you can reformat your drive—but keep in mind that reformatting your USB flash drive will erase all files on it. Finally, if the flash drive won't work because of physical damage, you should take it into a tech department or data recovery professional; if that's not possible, you may be able to fix it yourself by soldering the broken USB drive's circuitry to a working USB cable. However, attempting repairs yourself is not recommended as there is a high risk of destroying the flash drive.

How to connect a USB flash drive to a Mac?

Connect the USB flash drive to your computer. Plug it into one of your Mac's USB ports.

How many gigabytes does ExFAT have?

Works on Windows and Mac, but has a storage limit of 32 gigabytes. exFAT (Recommended) - Works on Windows and Mac, and has no storage limit. If you've formatted your drive before and you're positive that it isn't broken, you can also check the Quick Format box. ...

How to format a hard drive?

Click Format. It's in the menu that appears when you right-click the drive. Doing so opens the Format window.

Why won't my flash drive work?

Finally, if the flash drive won't work because of physical damage, you should take it into a tech department or data recovery professional; if that's not possible, you may be able to fix it yourself by soldering the broken USB drive's circuitry to a working USB cable.

What to do if you choose to seek the services of a professional data recovery company?

If you choose to seek the services of a professional data recovery company, be sure to describe your problems to the best of your abilities to ensure they have the tools and experience for the job.

How to get to the menu on a flash drive?

Right-click your flash drive's icon. This displays a menu to the right of the drive.

We can recover your data

If you've suddenly lost family photos, financial records and other crucial data, we're here to help. Make an in-store appointment with a Geek Squad Agent and we'll use our expertise to recover your data as quickly as we can.

What to expect with Data Recovery

Bring your device or drive to your appointment and an Agent will diagnose your data loss. There is a $49.99 charge for this initial service.

Data Recovery Q&A

If it holds data, we will take it. A list would be too long to compile, but it includes all makes and models of laptops, desktops, hard disk drives, camera systems, SD cards, DVRs, flash devices and voice recorders (mobile devices excluded).

What advice do you give to people seeking data recovery?

One piece of advice we always give to people seeking data recovery is to always request an upfront quote. And remember:

How much does it cost to recover a hard drive?

Depending on the severity of the issue, recovering a hard drive can cost anywhere from $99 to $2000.

What to do if playback doesn't begin?

If playback doesn't begin shortly, try restarting your device.

Can you recover data from a hard drive?

At Hard Drive Recovery Group, we’re confident that we can recover data from whatever drive or media you send us. In fact, 98% of the time, our client’s data is fully recovered via either hard drive recovery software or hard disk repair.

Is Gigabyte charging for data recovery?

The idea of charging for data recovery by the GigaByte makes very little sense, as the job is typically an all-or-nothing proposition. This myth was created by a specific provider in Los Angeles, CA, to make it appear that their costs are particularly low compared to other shops. They are not.

Can a hard drive be recovered?

It can be, depending on if the hard drive has physically failed, or it is simply a file system issue. If the data can be recovered with software, it will generally be much cheaper than if a clean room data recovery service is required.

Can a data recovery engineer answer your question?

No matter the issue, a data recovery engineer should be able to answer your question immediately.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9