| Brass Repair Pricing Prices do NOT include parts. | ||
|---|---|---|
| Instrument | General Service | Overhaul Student Instruments |
| Trumpet or Cornet | $60-$90 | $550 |
| Single Horn (3 Valves) | $90-$125 | $1,065 |
| Double Horn (4 Valves) | $60-$90 | $1,540 |
How much does it cost to repair a trumpet water key?
To repair a broken water key will cost about $20-$40. Stuck slides are a fairly common issue among trumpet players. This is one of the cheaper issues to fix – however, it’s also tempting to try to yank and pull at the slide until it comes loose.
How much does it cost to repair trumpet tubing?
A minor dent will generally cost between $20 and $50 repair. Cracks in soldering seams can happen and can often be repaired by a professional (or by yourself, if you’re very handy). See the article Patching Cracks, Splits, Holes etc. over at robbstewart.com to find out more about common splits in trumpet tubing.
How much does it cost to align trumpet valves?
Price: To solder two components of your trumpet together will cost roughly $30. A valve alignment is about aligning the pistons with the corresponding holes in their valve casings. This can happen when your valve felt pads compress over time and shift the position of the valve hole slightly.
Why do good quality trumpets last longer?
The reason that good quality trumpets last longer is that for the most part they are made with more care, made with better materials and have better quality components (valves, horn, mouthpiece etc). Care and maintenance is another critical step to ensuring a long lifespan for your trumpet. Looking for a teacher?
Can you fix a bent trumpet bell?
Try using a pair of marching drumsticks to bend your bell back into shape. One stick on the inside and one on the outside of the bell. The result won't be pretty but it will get you 90% of the way there (ps if its a really nice horn take it to a pro).
How do you fix a crack in a trumpet bell?
Stress cracks in brass tubes and bells can be repaired with either regular silver solder or low temperature silver solder. It really depends on the desired results. Silver solder or hard solder requires significantly higher temperatures and will blend nicely into the brass color just like the material along the seam.
How much does it cost to get a trumpet replated?
Refinishing and ReplatingSilver PlatingGold PlatingTrumpet / Cornet / Flugelhorn One-piece$50.00$120.00Trombone One-piece$60.00$170.00Tuba One-piece$70.00$175.00Saxophone Mouthpiece$50.00$120.0011 more rows
Can trumpets be repaired?
Fortunately, the trumpet is a fairly simple mechanism and the problems you'll run into are pretty universal. Experiencing problems with the trumpet and its various components is a normal part of owning the instrument, and many of the issues can quickly and easily be fixed by a qualified repair technician.
Why is my trumpet not making noise?
Air blown into the trumpet refuses to pass through, rendering the instrument unplayable. While there are many possible causes, it's most likely that one or more of the valves has been turned from its proper position, blocking the air flow.
How do you fix cracked brass?
3:3821:27Patching a Bell Crack: Restoring an Antique French Horn #4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust going to open it up a little bit and then a little bit. More. Until i can get that ring out ofMoreJust going to open it up a little bit and then a little bit. More. Until i can get that ring out of there. Okay there it goes. Now with a little bit larger screwdriver i'm going to melt the solder.
Can you Replate a trumpet?
If you're playing the horn,though, and having a shabby looking instrument bothers you, then by all means have it relacquered or replated. It's not going to ruin it, as long as you follow the idea that you get what you pay for. So many trumpets and mouthpieces, so little time.
Can you spray paint a trumpet?
Using spray paint is the best way to achieve an even color on every part of the trumpet's surface. Because there are so many nooks and crannies on a trumpet, the mist that spray paint provides will ensure that no part remains unpainted.
Can you remove scratches from trumpet?
Just work the general area around the scratch(es). Upon successfully removing the worst of the scratch, move to a finer abrasion polish, like other automotive polishes by "Mother's" or "Meguir's". Finally, a jewelery silver-polish will get most of the swirls out. The best final touch would be with "Flitz"-brand polish.
Do trumpets need service?
Keeping it properly maintained is critical to keeping it in prime playing condition. Whether you're new to the trumpet or have neglected it for far too long, trumpet maintenance is actually quite easy.
Is it OK to put water in a trumpet?
2:246:29How To Clean a Trumpet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAreas time to fill the sink. You want to make sure that the water isn't too cold or too hot you'llMoreAreas time to fill the sink. You want to make sure that the water isn't too cold or too hot you'll want to aim for deep warm water let the water fill until it submerges the trumpet fully.
Do trumpets get old?
Good quality trumpets will last around 60 years when cared for properly. The valve pistons are typically the first things to break. Some trumpets will last close to 100 years and still be fully functional if they are well-taken care off and haven't been played much. How to Check If a Trumpet Is Too Old?
How much does it cost to refurbish a trumpet?
Brass Repair Pricing Prices do NOT include parts.InstrumentGeneral ServiceOverhaul Student InstrumentsTrumpet or Cornet$60-$90$550Single Horn (3 Valves)$90-$125$1,065Double Horn (4 Valves)$60-$90$1,54014 more rows
How much does it cost to polish a trumpet?
Trumpet Repair ServicesSERVICE PLANSDESCRIPTIONCOSTUltrasonic Cleaning*Disassemble, degrease and Clean; Includes Play Condition$95.00 +$50.00 for silver polishPlay ConditionService Valves & Slides; Up to 2 Solder Points, New Corks & Felts as needed, Remove Minor Accessible Dents$75.00
How much does it cost to have a trumpet cleaned?
Lacquered Trumpets (Brass Color)ServiceEstimate of PriceChem Flush Cleaning$70.00Valve Repairs$48.00 ea. for Pistons $60.00 ea. for RotorsFreeing Slides$45.00Water Key Corks$21.006 more rows
How much is an old trumpet worth?
The good news is, used prices are low. Most YTR-2330s on eBay sell for between $300.00 and $500.00, but you can find good-condition instruments for as little as $200.00.
What is valve reconstruction?
Valve reconstruction makes your valve cylindrical in shape and fits perfectly in the valve housing so that your valve runs smoothly. The valves are then nickel-plated. You can also choose valve alignment, valve alignment ensures that the passages in the valve connect seamlessly to the valve pumps. This results in better control of the instrument.
Can you have your mouthpieces silver plated?
In addition to silver plating and lacquering your instrument, you can also have your mouthpieces silver- or gold plated. Contact us about the costs and possibilities. We can also make a plastic rim on the mouthpiece or a screw-on rim.
The First Diagnosis
- The ideal solution would be to replace the bell section entirely, this was indeed an option – but extremely expensive, much to the despair of the owner who loved this instrument for many years. After discussing various options, we agreed to do our best straightening the bell by hand. We knew it wouldn’t be 100%, but once the work was done, we would...
Starting The Repair
- Firstly, the Trumpet was mounted on a bell forming mandrel – this cone shaped former can be used as a template, to push burnishers into or hammer down the rim. As you can see, a significant improvement could be seen almost immediately with a bit of brute force. Brass is fairly soft and co-operative when it comes to re-shaping, as long as it’s not too old and brittle. The rim of the be…
Compromises
- The surface lacquer coating had been badly stretched by the damage and then again by the repair – see pic below. We call this effect ‘crazing’, where the lacquer becomes milky, matte finish and sometimes even breaks away. We can facilitate re-lacquer work, but it is expensive, and we were trying to keep costs low. We stripped the remaining lacquer off the bell section in-house and got …
Final Thoughts & Completed Pics
- The final bell repair is far from perfect, but our customer was thrilled with the result from the initial starting point and with the limitations of cost. Having talked through the options, we were able to compromise while still doing what was needed within the budget and requirements of the owner. This job is a perfect example of how understanding a customers needs can help us to think outs…