Drywall repair cost
| Repair | Average Cost |
| Small hole patch or dents | $50 – $150 |
| Medium to large hole patch | $200 – $400 |
| Hairline crack (less than 6") repair | $100 – $250 |
| Medium crack (6" to 24") repair | $120 – $330 |
Full Answer
What is the average cost to repair drywall?
Typical Drywall Prices
- Green Board Drywall Price. Green board drywall prices range from $14 to $18 per panel. ...
- Blue Board Prices. Blue board drywall costs $12 to $15 per panel. ...
- Purple Drywall Prices. Purple drywall costs $15 to $60 per panel. ...
- Other Gypsum Board Prices. Foil-Backed: Added moisture protection for cold climates. ...
How to estimate drywall repair cost?
- Drywall repair costs $50 to $100 per square foot for small jobs and fixes.
- Drywall contractors charge minimum trip fees of $125 to $200.
- Drywall repair labor costs $40 to $100 per hour.
What is the cost per square foot for drywall?
best pro for the job. Drywall is an affordable and reliable material and that’s why it is popular among homeowners and builders. Drywall finish can cost from $1.00 to $1.65 per square foot just for a finish if drywall is already installed. You can expect to pay from $560 to $742 for an average-sized room with labor and materials included.
How much to hang and finish drywall?
To hang and get this level of finish on your drywall, you’ll pay between $1.00 and $2.50 for each square foot. Think about how much finish your drywall needs to look complete and nice. Rooms you don’t go in as much like your basement or attic will require a lower finish level than living or family rooms.
How much does it cost to patch hole in drywall?
Drywall hole repair costs $50 to $400 per patch, depending on the hole's size and location: Patching one small hole costs $50 to $150 or $200 to $650 for multiple holes. Fixing medium or large holes costs $200 to $400 per hole. Prices increase for drywall in difficult-to-access areas or with water damage.
How do I estimate drywall repair?
Drywall Repair Costs In general, if the hole can be covered with what's referred to as a "patch," the repair will be a flat rate. The most expensive part of the project is the labor. For minor repairs, expect to pay an average of $60 to $90 per hour for handyperson repair, or about $50 to 75 per square foot.
How much does it cost to replace a section of drywall?
Drywall repair costs:National average cost$300Average cost range$250-$390Low-end cost range$81-$118High-end cost range$1,000-$1,500Apr 22, 2021
How much does it cost to fix hole in wall?
According to experts, you can expect to pay $50 to $75 per hole for drywall repair. The price includes materials and labor. For some handymen or drywall contractors, the location of the holes may factor into the cost.
How much does it cost to tape and finish a sheet of drywall?
The average cost to finish drywall is $1.50 to $3.50 per square foot for labor and materials. The cost to tape and mud drywall is $0.35 to $1.10 per square foot and is typically included with finishing. Finishing drywall in a 12x12 bedroom costs $580 to $1,800.
How much does it cost to spackle a room?
Expect to pay between $60 and $80 for a professional to spackle a small area of repaired sheetrock. Spackle is a different compound to use instead of mud and is a better choice for small nail holes.
How much does it cost to re sheetrock a room?
This cost works out to around $60 to $90 per drywall panel. So, for a standard 12-foot-by-12-foot room (using 18 panels), you could expect to pay anywhere from $1,000 to $1,600 in total. Hiring a pro for this job typically costs around $50 to $100 per hour.
How much does it cost to Sheetrock a room?
Cost to Replace DrywallItem detailsQtyLowUnused Minimum Labor Balance of 4 hr(s) minimum labor charge that can be applied to other tasks.0.0 h$0Totals - Cost To Replace Drywall125 SF$505Average Cost per Square Foot$4.047 more rows
How much does it cost to have Sheetrock removed?
Cost to Remove WallboardItem detailsQtyLowUnused Minimum Labor Balance of 2 hr(s) minimum labor charge that can be applied to other tasks.0.0 h$0Totals - Cost To Remove Wallboard125 SF$60Average Cost per Square Foot$0.484 more rows
How long does it take to patch drywall?
Total time: 15-20 minutes for small holes and 1-2 hours for larger holes. Then up to 24 hours to allow joint compound/primer/paint to dry.
How much does it cost to fix nail pops?
How much does it cost to fix nail pops? If you get a professional to fix your nail pops, it can cost anywhere from $30 to over $100, depending on rates in your location. If you repair the nail pops yourself, however, supplies shouldn't cost more than $40-50.
How much does it cost to install drywall per square foot?
$1.50 to $3 per square footWritten by HomeAdvisor. Drywall installation costs $1,878, with a typical range of $993 and $2,921. This cost translates into a price of $1.50 to $3 per square foot for materials and labor. Most homeowners pay $2 per square foot, depending on the number of rooms and the level of finish.
How much does it cost to re sheetrock a room?
Cost to Replace DrywallItem detailsQtyLowUnused Minimum Labor Balance of 4 hr(s) minimum labor charge that can be applied to other tasks.0.0 h$0Totals - Cost To Replace Drywall125 SF$505Average Cost per Square Foot$4.047 more rows
How much does it cost to repair hole in ceiling?
Cost to Repair a Ceiling by Type of RepairType of RepairAverage Repair Costs (Labor Included)Crack$100 - $500Hole$100 - $600Seam$150 - $500Joist$150 - $7008 more rows•Jun 7, 2021
How much does it cost to repair drywall?
The bigger and wider the hole is, the more expensive drywall repair will be. Many builder-owners pay an average of roughly $75 per hour for drywall repair, but it varies based on professionals and region. Of course, bigger holes in drywall take longer to repair, and that means it’s more expensive.
How much does a 4x8 sheet of drywall cost?
Sheetrock and drywall are different in only one way, and that is cost. For example, a 4x 8 sheet of drywall costs $12-$16 but can cost as little as $7. Sheetrock generally starts out at $7 as well, and rarely costs more than $15 for a 4 x 8.
How long does it take to repair a small hole in drywall?
Repairing small holes in drywall is quite common, and many homeowners have to do it at one time or another. You can usually expect a small hole in drywall up to 6” to take no more than 2 hours to repair. It can take longer if the drywall is hard to reach and there are obstacles.
What do I need to repair drywall?
There are several things that you need to have on hand for DIY drywall repair, including: 1 Adhesive 2 Screws 3 Patch plaster 4 Drywall and masking tape 5 Drywall sheet (not always)
How much does it cost to repair drywall?
The cost of hiring a contractor to repair damage to drywall ranges between $292 and $845, or an average of $548, depending on the extent of the damage. However, regional pricing variations can also affect the cost of the repair.
How much does a drywall repair kit cost?
Kits cost between $10 and $30 each. Professionals will charge the rate of $60 to $90 per hour in addition to materials (which may be minimal). Cracks in drywall may be easy to repair, but will only return if they occurred because of foundation trouble.
How do I fix a small hole in a wall?
To fix a small hole in the wall, apply a patch that is slightly larger than the hole. Using a putty knife that is larger than hole's width, apply drywall mud to the patch, feathering the edges . Allow the mud to dry, then sand it until smooth. Paint over the mud when the job is finished.
How much does sheetrock cost?
However, these sheets generally cost more than its generic counterpart. An eight by four sheet is priced at around $11 to $15.
How much does it cost to fix a ceiling?
The overall average cost to repair a drywall ceiling is between $320 and $1,300. Labor for a basic ceiling patch job run at about $65 to $90 per hour. For a simple patch, materials and supplies may cost around $30, including tape, fasteners, and mud. Ceiling repair is best performed by a professional because physical strength and special tools (including properly sized ladders or even scaffolding) may be required. In addition, fixing high ceilings can be dangerous for an untrained professional.
What to do if your foundation cracks?
Homeowners who notice cracks may need to hire a professional to assess their foundation's condition. Contact a foundation professional for costs of foundation repair if other signs of foundation damage are noted, such as jammed doors or windows and cracks in the foundation.
How much does water damage repair cost?
Water damage repair may have its own costs in addition to the average hourly rate of $60 to $90 plus materials. For example, mold remediation may have a separate charge if professionals are needed to remove mold spores and prevent the spread of mold to the rest of the house. The average cost for mold remediation is $2,300.
Can drywall be damaged by water?
Whether you call it drywall or sheetrock, it is the material that appears on walls and ceilings in most homes. Even homes with paneling may have drywall hidden behind it, and there are different types of drywall available. It can be easily damaged by a water leak, nails, doorknobs, and even just bashed into and smashed. It can crack and dry over time, and a house settling can damage drywall.
Can you do small repairs?
It is possible to do small repairs, but as already noted, it makes far more sense to get some estimates from experts. They can make seamless repairs of any size and ensure that no further problems occur.
How much does a drywall repair kit cost?
If you have a small hole measuring just a few inches across, you can purchase a drywall repair kit from a home improvement store for $10 to $30. These kits usually include spackle, wall patches, a putty knife, and sandpaper. If you need to paint to match the surrounding area, you should add an extra $15 to $25 for a quart of color-matched paint.
How much does it cost to fix a hole in drywall?
Fixing a small hole in drywall is an easy project that costs $100 or less, whether you hire a professional or do the job yourself. If you have several holes to repair or more extensive damage that requires replacing drywall, you can expect to pay up to $1,100.
How much does a handyman charge to install drywall?
Handypeople are best for smaller projects and charge about $60 per hour. However, if you have extensive damage or need to replace entire walls, it’s better to call a contractor.
How much does a handyman charge per hour?
However, if you have multiple areas that need repair or you have extensive damage, you can expect to pay by the hour. Handypeople typically charge about $60 per hour, while contractors charge about $90 per hour.
Can you repair drywall yourself?
When deciding between making drywall repairs yourself or hiring a local drywall installer, think about whether you have the skills and time to make a proper repair. Small patches are relatively easy, but larger ones may require you to cut out broken drywall to add a new piece .
Can shoddy repairs affect resale value?
In addition to looking bad, a shoddy repair can prevent you from getting back a deposit or affect the resale value of your home. Considering that the cost of bringing in a professional is relatively low, this is usually the better (and overall more financially sound) decision.
How thick is drywall?
Thickness – 3/8” to ½” thick. The drywall size most commonly used in residential walls is 4’ wide, 8’ tall, and ½” thick —the average wall height. Ceiling drywall tends to be made lighter due to significant gravitational forces, and some are labeled “sag resistant.”.
How much does it cost to frame a 12x12 room?
How much to frame and drywall a room? A 12’ by 12’ room with 8’-high walls is a total of 576 square feet. With framing at $4.50 per square foot, it will cost $1,728 to frame, and another $872 to hang drywall for a total cost of $2,600.
How much does drywall cost per sheet?
Depending on the brand and the thickness of drywall needed for installation, the per sheet price is going to range from $9.50 to $18 each, average price $11.2 5 each. Installers can often get access to lower unit prices for drywall if they buy in bulk.
What is drywall called?
What we refer to today as drywall was originally called Sackett Board when it was invented by U.S. Gypsum Company in 1916. Prior to its release on the market, the standard solution for creating wall surfaces, both residential and commercially, was to use a mix of lime and sand or concrete called plaster to sculpt a wall surface to coat a board. As widespread as the use of drywall has become, it is not suitable for every construction need, especially when more elaborate work is required or the wall features curved surfaces.
How much does white drywall cost?
$10. This white drywall is available with either square or tapered edges, and historically it has been the most prevalent type of drywall used in residential construction for living rooms and bedrooms.
How much is asbestos per square foot?
This typically averages around $4.50 per square foot, including labor and materials. Asbestos in drywall products - Asbestos has had a roller coaster of a ride in relation to bans, phased bans, and partial bans.
How much does it cost to remove drywall?
If you want someone else to take care of tearing out the old drywall, the costs typically average somewhere between $4 and $6 per square foot, and another $400 to $600 to have the debris taken off-site for disposal .
