That said, here are some of the more common types of repairs and what they usually cost:
- Filling cracks and holes: Typically ranges from $300 to $500.
- Paintless dent repair: This doesn’t apply to plastic bumpers (which get buffed) or damages where paint has been scuffed...
- Standard dent repair: Most dent repairs cost between $100 and $600, on average.
What is the average cost of a bumper repair?
With minimal damage, you can expect to pay at least $100, but that figure will depend on again the make, model, and year of a vehicle. More extensive damage amounts to around $2,000 for full bumper replacement. Other Repair Methods. You can repair a bumper through paint-less dent repair or PDR. A body shop will use special tools that pull the dents out of a bumper without damage to the paint.
How much does a scratched bumper cost to repair?
If your bumper encounters a few scratches but there’s no paint removed, it’s a clear-cost scratch that typically takes 30 to 60 minutes per panel to complete. The price typically costs $50-$200 each. This is the best-case scenario since it’s the cheapest and quickest option.
How much does it cost to replace a rear bumper?
Likewise, it puts you and your passengers at risk because a damaged bumper can no longer protect you from minor crashes. How much does it cost to replace a bumper? On average, for a total bumper replacement, the costs are going to be anywhere between $500 and $2,500+ for an OEM rear bumper.
How do you repair a cracked car bumper?
Part 2 of 2: Repair a cracked bumper
- ¼ inch burrowing tool
- Air compressor suitable for tool usage (you will only need an air compressor if you are using air powered tools)
- Angle grinder
- Body filler such as Bondo
- Drill or dremel to fit burrowing tool
- Dust mask
- Jack
- Jack stands
- Masking paper or newspaper
- Paint brush
Is it worth fixing a cracked bumper?
It is essential because repairing bumper dents or bumper cracks can be just as crucial for the health of your car as maintaining the engine and brake. Even the smallest dents on your car or truck are ugly imperfections, mainly if it contains paint damage or crack.
Can a cracked bumper be repaired?
It is essential to repair the damage done to the bumper at the earliest because a broken bumper won't withstand impact as much as one that has not been damaged. Sometimes, cracked or scuffed bumpers can easily be fixed at home using a DIY repair kit.
How much does it cost to repair plastic bumper?
The average cost to repair plastic bumpers ranges from approximately $150-$450. However, the cost to replace a bumper in the event of extensive damage can be anywhere between $800-$1,300. In many cases, your insurance should cover the repair.
How much does it cost to repair a cracked rear bumper?
The exact cost to repair your rear bumper depends on the extent of the damage and what kind of car you own. In general, most people should expect to spend between $225 and $750. But if you need to replace the rear bumper, then you could end up paying up to $2,000.
How do you fix a cracked bumper?
0:004:05DIY Bumper Crack Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipHolds. I'm going to take a little bit of 40 grit sandpaper. And rough up the area around the crack.MoreHolds. I'm going to take a little bit of 40 grit sandpaper. And rough up the area around the crack. And next we can use a little bit of acetone or alcohol to clean the crack both on the inside.
Can plastic bumpers be repaired?
Many plastic bumper parts can be repaired, especially bumper covers, which are commonly damaged on a vehicle. By saving your bumper, the technician will also be able to blend the appended paint more efficiently and accurately.
How long does it take to fix a bumper?
If the damage is simple, your bumper could be fixed in as little as three hours. However, if the damage is significant, you could be waiting three days for your bumper to be fixed. The best way to find out exactly how long the repair will take is to bring your car to an auto body shop and have the area inspected.
Are car bumpers expensive?
Replacing a bumper could cost anywhere between $500-$700 for labor and $385-$925 for parts at an auto body shop. The cost is usually dependent on the year, make, and model of a car, as well as the body shop's labor cost.
How much does it cost to touch up a bumper?
Once the damaged area is smooth, they will then paint the area. The cost is typically between $300 – $500, but it might be higher depending on the cost of your car's paint. On average, expect to pay between $200 – $700 for a bumper repair cost.
How do you repair a plastic bumper?
0:583:13Proper Repair of Crack or Tear on Plastic Bumper Products - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a DA with P 80 grit to rough up the backside for the reinforcement repair blow off the repairMoreUse a DA with P 80 grit to rough up the backside for the reinforcement repair blow off the repair with clean dry air and apply a light coat of adhesion. Promoter. Allow ten minutes of drying time.
How much does it cost to repaint a bumper?
In most scenarios, the bumper painting process will only take a few hours, which puts labor costs in the $94 to $430 range. Supplies will be in the range of a few hundred dollars, depending on material or color. However, these rates are only averages, and every repair shop is different.
How do you fix a damaged rear bumper?
0:5816:22DIY Bumper Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipTools and we're simply gonna push out the dent from the back. Side. We can use a smaller end of theMoreTools and we're simply gonna push out the dent from the back. Side. We can use a smaller end of the dolly to really help get our body line where we want. It. Apply some more heat if necessary.
Will a cracked bumper fail an MOT?
For example, if your bumper is only lightly scratched or dented, it's unlikely your car will fail its MOT. But if it is detached, that will be classed as a dangerous defect and if it is insecure or has suffered damage which could cause injury when contacted, that will go down as a major fault.
How do you repair a plastic bumper?
0:503:13Proper Repair of Crack or Tear on Plastic Bumper Products - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a DA with P 80 grit to rough up the backside for the reinforcement repair blow off the repairMoreUse a DA with P 80 grit to rough up the backside for the reinforcement repair blow off the repair with clean dry air and apply a light coat of adhesion. Promoter. Allow ten minutes of drying time.
How can I fix my bumper myself?
2:5516:22DIY Bumper Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow we have a little bit of a high spot still so we're going to use some heat and push it down weMoreNow we have a little bit of a high spot still so we're going to use some heat and push it down we don't want to grind away all the plastic. We just want to make sure we have a level surface.
How do you fix a cracked car body?
5:288:12How to repair cracked paint on your car. diy auto body, auto body repairYouTubeStart of suggested clipEnd of suggested clipThe first thing you want to do before you apply paint is you want to use a prep solvent a wax andMoreThe first thing you want to do before you apply paint is you want to use a prep solvent a wax and grease remover. And wipe the entire panel down to remove any contaminants.
How Much Does It Cost To Repair A Bumper
Your typical bumper repair cost is surprisingly expensive. Behind all the cosmetic damage, bumpers are structural elements of your car built for cr...
How Much Does It Cost To Fix Scratches On Car
Getting scratches on your paint is something that every car owner has to face every once in a while. However, getting them fixed could be a complic...
How To Get A Dent Out Of A Bumper
If you'd rather have a professional do this, they can pull out the dents and have the damaged surface repainted. A repair job like this would run y...
How much does it cost to fix a broken bumper?
Your technician will then sand the area until it’s smooth. Once the damaged area is smooth, they will then paint the area. The cost is typically between $300 – $500, but it might be higher depending on the cost of your car’s paint.
How to get a damaged bumper to pliable?
Warm up the damaged area using a hairdryer or a heat gun until it becomes pliable. It will usually take about 5 – 10 minutes to do this. Keep in mind that if you’re using a heat gun, keep it about 4 feet away from the bumper as it can reach temperatures that will melt your paint.
What are the different types of bumper damage?
Generally, there are three types of bumper damage depending on the severity: 1. Dented Bumper. Dents and scratches are the lightest kinds of damage. They often happen at low-speed impacts, such as when you “gently” tap a pole.
How to remove a splash guard?
To do this method, do the following steps: 1 Lift the car with a car jack and secure it on jack stands. You may not be required to do this depending on where the damage is, but it can give you more room to work. However, if you’re going to use a plunger, then you won’t need to do this and the second step. 2 Remove the splash guard if necessary. It may cover the area of the bumper. They will usually be held by either plastic clips or metal bolts. 3 Warm up the damaged area using a hairdryer or a heat gun until it becomes pliable. It will usually take about 5 – 10 minutes to do this. Keep in mind that if you’re using a heat gun, keep it about 4 feet away from the bumper as it can reach temperatures that will melt your paint. 4 Push the bumper out. You can do this by using a pry bar to push the bumper from the inside out. You can also use a plunger to pull it from the outside. Be sure to pull or push from the deepest dent. If the bumper still isn’t flexible, try heating it up again. 5 Repeat the process until the bumper is back to its normal state.
What is a bumper made of?
On the outer layer, there’s a bumper cover that is made from a mix of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS).
How much does it cost to fix dents on a car?
It’s like the dents were never there. This will typically cost between $150 – $250, but it will depend on how many dents you have on your bumper.
How much does a bumper cover cost?
Bumper covers for most cars will typically cost around $300 – $400. However, if you drive a luxury car such as the 2010 Mercedes-Benz S400, then the bumper cover cost itself can be anywhere between $600 – $900 depending on the trim. Some models will cost as much as $1,500 for the bumper cover itself.
How much does it cost to repair a cracked bumper?
If an auto body shop repairs your cracked bumper, expect to pay between $350 and $600. The cost to fix a cracked bumper will depend on two things. How severe the crack is. What kind of paint your car has. Car paint is so expensive nowadays. Certain metallic car paint colors are even more expensive. If the bumper needs replacement, it will cost between $1000-$1500 depending on the make and model.
How to fix a cracked bumper?
Start welding the cracked bumper - Use the soldering iron to start welding the cracked bumper. The soldering iron may take five minutes to warm up and be able to melt the plastic. Once the soldering iron is hot, we start to weld the bumper on the outside first. This way, we can line the bumper up perfectly.
Would a car with a cracked bumper fail MOT / State safety inspection?
In most states, a car that has a small bumper crack won't fail inspection. If you have a large crack over four inches or have any parts of the bu mper loose, you will most likely fail state inspection.
Where to order a custom mixed spray paint can?
We found several listings on eBay that will ship you mixed custom car paint .
Can you fix a cracked bumper yourself?
On top of that, it also depends on how strict the mechanic at the inspection station is. Try to repair a cracked bumper yourself before taking it in for an inspection. The inspection station will not care if you or a body shop fixed the bumper crack or if it doesn't look perfect.
Can you remove a cracked bumper?
Remove your cracked bumper - This is a picture of our cracked bumper. This is a small crack. With this method, you can repair much larger bumper cracks. We strongly recommend that you remove the bumper to repair the crack. Or at least partially remove it. Bumpers may seem hard to remove, but they are not. Car bumpers are held in place with several 10 mm bolts and a few push-in pins. Once you remove the screws, you can easily remove the bumper.
Can you replace a cracked bumper without replacing it?
Small bumper cracks can be easily repaired. You don't need to replace the bumper if you got a crack on the lower lip. Take your car to a body shop, and they can fix your bumper without replacing it. If your bumper is cracked in multiple places, you may want to replace the bumper.
Can a body shop fix a crack in a bumper?
We bleieve that it is not cost effective to use a body shop for minor bumper crack repairs. This is because a body shops will in most cases not repair a bumper crack. It is far more likely they would simply fit a new bumper to the car and charge more in the process. Our SMART repair techniques offer the perfect solution to small scale damage for a fraction of the price of a body shop repair job.
Can you plastic weld a crack in a bumper?
We will plastic weld the crack in your bumper and fill excess damage to ensure the repair is successful. This means that there are no excess material charges and you are not paying for the cost of the new bumper as we haven’t needed to fit one. As the material cost and labour time is far less than traditional methods we can pass those benefits onto you In huge savings in time and money!
The Safety Brief
Safety comes first. We want you to get this job done in one piece. This job requires some grinding, sanding, spray painting, and mixing epoxy. To ensure your skin remains unblemished and intact, you’ll want to make sure you wear gloves, safety goggles and EHS/PPE rated dust masks. On top of that, you’ll want to work in a well-ventilated area.
The Tools & Parts You Need
Don’t get stuck in the middle of a job without the parts you need. Gather everything required for the job before you start.
FAQs About Fixing a Cracked Bumper
We can’t read your mind, but we want to try to answer any questions you have before you start the job. We’ve selected common points of confusion from our experience, as well as commonly asked questions from popular search results. We answered those questions below.
Learn More From This Helpful Video Tutorial
Car Bibles editors understand that not everyone is a text-based learner. For those kinesthetic people out there, we have your back with a video showing you exactly how to fix your cracked bumper. We pulled it from one of our favorite, most trusted sources and it’s a great additional resource.
How Much Does Rear Bumper Replacement Cost?
Thankfully, replacing a bumper doesn’t always mean the entire structure, sometimes, you only need a new cover. The same goes for the Styrofoam and brackets, the cover can be intact, but they might break. Let’s take a closer look at what you might expect in terms of costs:
How much labor does it take to replace a bumper?
Labor. The labor amounts are similar to that of a repair unless the replacement cover is already painted. If it’s not, expect an average of about 6 to 8 hours of labor. They include removal of the old bumper (as well as any trim pieces, the brake light assembly, and any sensors or cameras).
What is a Bumper and What are they Comprised of?
In the past, bumpers were solid chunks of metal. Today, they’re comprised of several pieces that work together to absorb impact force in the event of a collision ( often referred to as 5-MPH bumpers). As this name suggests, 5-MPH bumpers should remain free of damage (other than minor cosmetic flaws) in an accident that’s at or below this threshold.
What is a 5mph bumper made of?
First, there’s the bumper cover, which is made from a mix of polycarbonate and acrylonitrile butadiene styrene (PC and ABS).
What are bumper mounts made of?
Then there are the bumper mounts, which are made from either plastic, steel, aluminum, or fiberglass. Like the Styrofoam, the mounts are also designed to absorb the impact force from a low-speed collision. Directing it away from the passenger compartment.
How much does a body shop charge per hour?
As stated earlier, body shops often charge between $50 to $100 per hour, sometimes more. Unless it’s very minor damage, the shop will likely have to remove the bumper first (as well as any cameras, sensors, or trim pieces). Repair options include filling and glazing, heat repairs, and paint-less dent repairs (PDR).
How to get rid of a dent in a clear coat?
With any luck, you’ll notice a small dent disappear before your eyes. Just be sure not to get too close, and if you see the area starting to look dull, be sure to stop immediately. You’ve likely melted the clear coat and need to apply a layer of wax.
How much does it cost to buff out scratches on a car?
Any auto body shop or detailing center can buff out scratches for you, and this often works well. Costs typically vary from $50 to $200.
How much does it cost to buff a car?
Any auto body shop or detailing center can buff out scratches for you, and this often works well. Costs typically vary from $50 to $200. You can also buff yourself using an electric automotive polisher along with the finest grade of auto polishing compound. A variable speed 6-in. random orbit woodworking sander fitted with a buffing pad also works great as a polisher.
What is a bumper cover?
More accurately called a “bumper cover”, these decorative plastic components hide the metal structural bumper components underneath. Bumper covers are easily damaged (whatever happened to those chrome bumpers that really could take some bumps?), and the best way to fix yours depends on your situation, your abilities, and the kind of bumper damage you’ve got.
Can you damage a bumper?
First, there should be no damage to the underlying metal bumper structure. If damage to the cover is small, then patching with conventional, catalyzed auto body compound is an option. That should even work on a big puncture localized in one place.
Do bumper covers need to be stabilized?
The second thing: Bumper covers need to be stabilized before they can be patched, sanded and made to look like new. Bumper covers are flexible enough to bend inwards when you push them. If movement like that happens after patching, it will cause the auto body filler to crack and fall out.
Can you take off a bumper cover without damaging the bodywork?
Getting the old bumper cover off without damaging the surrounding bodywork isn’t easy because all the fasteners and clips are hidden.
Can you fill the bumper cover with foam?
Filling the area behind the bumper cover with foam in one go will cause too much pressure and an outward bulging of the plastic. Painting and buffing are the final steps to complete a bumper patching job. Originally Published: March 27, 2020.
