| Item details | Qty | Low | High | |
| Fascia Board Installation Equipment Allo ... | 64 linear feet | $114.81 | $173.22 | |
| Unused Minimum Labor Balance of 2 hr(s) ... | ||||
| Totals - Cost To Install Fascia Boards | Totals - Cost To Install Fascia Boards | |||
| Average Cost per Linear Foot | Average Cost per Linear Foot | Average Cost per Linear Foot |
How much does it cost to install fascia boards?
The national average materials cost to install fascia boards is $1.72 per linear foot, with a range between $1.37 to $2.06. The total price for labor and materials per linear foot is $6.22, coming in between $4.90 to $7.54. A typical 125 linear foot project costs $777.21, with a range of $612.03 to $942.39.
How to replace a fascia board?
How to Replace the Fascia Board Step 1: Start by removing the gutter and any extra roof shingles that may be covering the fascia board. This is easiest if you decide to erect a scaffold but a ladder will work just as well. Step 2: Use a circular saw that is set to a 45 degree angle to cut off the damaged fascia board that is present. This may ...
How much does it cost to install soffit and fascia?
Written by HomeAdvisor. Professionally installing or repairing fascia and soffits usually runs from $6 to $20 per linear foot depending on the type of material used and the complexities of the installation.
How much does it cost to replace fascia and soffits?
The average cost to replace fascia boards and soffits is $2,300, but prices may range from $600 on the low end to $6,000 on the high end The cost to replace your fascia and soffit will differ from project to project.
How much does it cost to put on fascia?
Fascia installation costs range from $6 to $20 per linear foot, while soffit installation tends to be cheaper than fascia at $1 to $3 per linear foot.
Can you repair fascia boards?
0:008:54Repairing Fascia Board - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it splits real easily all you need is an 8 or 10 penny finishing nail on there galvanizedMoreAnd it splits real easily all you need is an 8 or 10 penny finishing nail on there galvanized finishing nail and you can secure this really well without splitting this wood.
How much does it cost to replace wood soffit?
The average cost to replace or repair fascia boards and soffits sits at $10 per linear foot, or $2,500 for the total cost of 250 linear feet. At the low end of the spectrum, expect costs to be $6 per linear foot, or $1,500 for the total. At the high end, costs are $20 per linear foot, or $5,000 total.
How much is a piece of fascia?
Vinyl fascia boards cost $5 to $8 per linear foot, while vinyl soffit boards cost $14 to $23 per 12-foot section.
How do you replace a damaged fascia board?
How To Replace Roof Fascia BoardStep One: Inspect the Existing Fascia. ... Step Two: Remove Gutters and Drip Edge. ... Step Three: Remove Existing Fascia Board. ... Step Four: Measure and Cut. ... Step Five: Cover the Seams. ... Step Six: Seal the Wood. ... Step Seven: Install Drip Edges and Gutters.
How hard is it to replace fascia boards?
Luckily, replacing a fascia board is as easy as taking out the old board and fitting a new one in its place. Once you've installed a new board, all you need to do is seal the seams and paint it to match your home. With a short afternoon renovation, you can have new fascia boards that will last for years!
What's the difference between soffit and fascia?
The soffit helps regulate your home's temperature, allowing your roof to “breathe.” Cool, dry air is drawn into the soffit vent, and hot moist air is forced out of roof exhaust vents. The fascia is the attractive board along the side of the overhang and the roof that helps your roof appear finished.
How do I renew my fascia board?
0:023:42How to Replace a Fascia - DIY at Bunnings - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust using multi grips to pull the clip out. Once we've got all the clips undone it's just a matterMoreJust using multi grips to pull the clip out. Once we've got all the clips undone it's just a matter of rolling the gutter off the clips. So just roll that out.
How do you repair soffits and fascia?
Soffit and Fascia RepairRemove Shingle Mold. Pry the narrow shingle mold from the fascia using a flat bar. ... Remove Rotted Fascia. Remove the rotted section of fascia. ... Remove Old Soffit. Pull down to remove the old soffit. ... Remove Rotted Rafter. ... Attach Cleat. ... Attach New Rafter. ... Seal Replacement Soffit. ... Attach Replacement Soffit.More items...
When should fascia be replaced?
If you have noticed that little to no ventilation is making its way into your home, that could indicate that your soffits and fascia are blocked or damaged. If the latter is true, you need to consider replacing them right away.
Is fascia board necessary?
The Best Fascia Tips You Will Read This Year. The short answer to this question is, “Yes!” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more.
What is the best material for fascia boards?
If you are looking to install fascias boards on your own, vinyl material is the best option. Vinyl is also widely used for soffits as well and is an accepted building code standard. It is also very easy to match or complement your siding. It is highly durable and very easy to install.
How much does fascia board cost?
Fascia boards cost between $1 and $20 per linear foot, with costs varying by material type. Wood is the most common type of fascia board because it’s easy to install, good-looking, and cost-effective at $1 to $3 per linear foot. Vinyl is another popular choice among homeowners because it’s easy to maintain, but it’s more expensive ...
How much does it cost to install vinyl fascia?
Vinyl is another popular choice among homeowners because it’s easy to maintain, but it’s more expensive at $5 to $8 per linear foot. The cost to install composite and aluminum fascia will be more expensive, but they’ll last longer.
Why do you need fascia boards?
The cost to replace fascia boards and soffits depends on the extent of the damage and the type of material you use.
How much does a soffit cost?
Soffits are relatively cheaper at about $1 to $3 per linear foot. The total cost will depend on the type of material. Hardware retailers usually sell soffits in 12 foot sections that cost between $10 and $23 each. Choose between vinyl, aluminum, PVC, and wood.
Where are fascia boards located?
Fascia boards are exposed horizontal boards located at the end of the rafters on your roof , while soffits are located beneath the rafter tails. You may not have paid much attention to them before becoming a homeowner, but they’re actually crucial elements of your roof.
Can fascia boards damage a roof?
Incorrectly installed fascia boards and soffit will damage your roof, warranting costly repairs. Material prices surged in 2021 due to high demand for siding and roofing. As demand grows and keeps manufacturers busy, delivery times are also lengthening. Order as far in advance as possible before your project.
How much does it cost to repair a vinyl fascia?
Fascia or soffit repair costs for labor run between $6 and $20 per linear foot.
What is the difference between fascia and soffit?
What’s the difference between fascia and soffit? Soffit is the board that bridges the gap between a home’s siding and roofline. It’s located under the horizontal fascia board, which holds the gutters. Soffits are at risk for water damage typically because of overflowing gutters or ice damming in cold climates.
Why is soffit water damaged?
Soffits are at risk for water damage typically because of overflowing gutters or ice damming in cold climates. If the roof drip edge, which directs water into the gutters, is missing or damaged, water will typically rot the fascia board before eventually traveling to the soffit, where it will continue on its destructive path.
How much does it cost to remove fascia?
It important to keep in mind, that the price to remove old fascias is $3-4 per linear foot. It can be as much as $4-5 per linear foot if there is no dumpster on the job and the contractor needs to dispose of old boards. If you need metal trim it will be another $5-8 per linear foot.
How much does aluminum fascia cost?
They can be as high as $17-20 per linear foot , for premium materials, such as aluminum. It is also possible to get aluminum fascia, which is a lot more durable and lasting that either wood or vinyl, starting at about $8-9 per linear foot. As we will discuss below, you don’t need to spend a fortune on high quality fascia.
How much does Azek PVC cost?
Azek PVC board is incredibly durable and moisture resistant, but prices are very reasonable, starting as low as $2.5 per linear foot. Home Depot sells a number of roof fascia materials and you can also them order from a specialty building materials suppliers.
Why is my fascia rotting?
Here, the board is usually made of wood, and it tends to rot. This happens due to excessive moisture exposure from rain, snow and ice dams that accumulate in the gutters, as well as roof leaks.
What is the strip of material that caps the ends of the roof rafters?
Usually, gutters are attached to a fascia strip. As you can see from the picture above, it is the exposed long horizontal strip of material that caps the ends of the roof rafters on your house. However, it does a lot more than create a “finished” nice look to your roof.
How often should I repaint fascia boards?
Sealed and painted wood may also need to be repainted every few years, while cedar and PVC may require less maintenance.
What damage can be done to a fascia board?
Types of damage that may merit replacing your fascia board include: Moisture damage: If your fascia board was left unsealed or without trim, it might be damaged by exposure to moisture. Roof leaks, gutter clogs and other roof issues may also allow the fascia to be exposed to moisture consistently.
Why do roofers put fascias in their gutters?
Roofers use the fascia to provide a stable mount for the gutters, but it serves other important functions as well. Without the fascia, the roof would have a gap leading straight into your attic. So, the fascia seals off your attic from the weather and animals. It is also aesthetically pleasing, especially when covered with a cap ...
What is fascia board?
The fascia is a long wooden board that runs horizontally on the edge of the roof. Usually, a fascia is either 2×8 or 2×6. This board connects the gutters to the roof truss. If you cannot see any wood in this spot, that’s likely because your fascia boards are covered with a vinyl or aluminum cap to match your gutter system.
What type of wood should I use for fascia boards?
Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.
Why is my fascia board damaged?
Clogged gutters, animal infestation in an attic area and other roof problems might leave you with a damaged fascia board. A damaged fascia can be the starting point for other roof problems and potentially lead to damage to an attic and home. So, if you have damaged fascia, it is important to have it replaced.
Why does my roof have black spots on the fascia board?
Black stains from algae may do the same. Cracks: Cracks in the fascia board may develop due to exposure to changing temperatures, to water damage or simply to age.
How to loosen a fascia board?
Keep the fascia board steady with your nondominant hand. Hold a hammer with your dominant hand behind your existing fascia boards and start pounding it to loosen the nails. Continue hitting the board until the nails behind it come out from the rafters. Once the board is loose, pull it off from your home.
How do I install a new fascia board?
1. Measure the length of your roof where you’re installing your fascia board. Use a tape measure to find how long your roof is where you’re putting in the new fascia. Make sure to double check your measurements so your cuts are precise.
How do I replace a gutter system?
Uninstall the gutter system from the fascia board you’re replacing. Unscrew the gutters from behind your existing fascia board with an electric screwdriver. Then, locate the brackets underneath your gutter holding them in place and unscrew them so you can lift the gutter up and away from the fascia.
How long does it take for fascia board to dry?
Once the fascia board is sealed, paint 1-2 coats of outdoor primer onto the wood and let it dry for 6 hours. When the primer is dry and evenly coats the surface, use a layer of outdoor paint to help protect your wood and blend it into the rest of your home.
Where are fascia boards located?
Fascia boards are found around the edges of your roof and usually support your home’s rain gutter system. Over time, these boards may start to rot or need to be replaced due to damage. Luckily, replacing a fascia board is as easy as taking out the old board and fitting a new one in its place.
How far apart should drip edges be on a roof?
Tip: Rafters are usually spaced 12 in (30 cm), 16 in (41 cm), or 18 in (46 cm) apart on center.
How to repair a fascia that is wet?
In order to carry out an effective fascia repair, you must first identify why your fascia got wet, and then do your best prevent water from soaking this area in the future. Chipped or damaged shingles can be a common source of water reaching fascia .
Can you replace fascia boards with PVC?
The most important thing to note here is that you should always replace fascia boards with PVC materials. These plastic-vinyl boards are inorganic, and therefore impervious to rot. For water-sensitive places like fascia, PVC is the best option. If you do want to use wood, make sure you’re at least using quality lumber.
Does fascia have to be the right length?
Producing a new piece can be a little tricky, because fascia wraps around a house. Pieces don’t just need to be the right length—they also need to be the right shape. Some pieces will have miter cuts on both ends, and even compound cuts where fascia turns up a roofline.
Do you need to go overboard with fascia boards?
Fascia boards have very little pressure on them. There’s no need to go overboard with fasteners. A high nail and low nail every couple feet is all it takes to secure the board in place. (Just make sure you’re fasteners are sinking firmly into the sub-fascia behind the board.) 9.
Can a gutter gunk up fascia board?
Rot and simple discoloration are two different things. In some cases, spillover from the roof or a gutter can just gunk up a fascia board. Actual rot will show up as soft spots or dark cavities in the surface of the board (like the one pictured above). Wood in these places will be mushy and pulpy.
