- Sprinkler system repairs cost $120 to $350 on average.
- Sprinkler head replacement costs $65 to $90 for professional replacement or $2 to $12 per head for DIY.
- An annual backflow test costs $50 to $100 and is required in most states.
Full Answer
How much does repairing a sprinkler system cost?
The average cost to repair your sprinkler system is $75 to $250, with most homeowners paying $212. Most sprinkler repairs involve replacing sprinkler heads at $5 to $20 per head, or replacing valves at $20 to $40 per valve, not including the cost of labor of about $75 an hour by a professional plumber. Likewise, How deep are sprinkler lines buried?
How much will a good sprinkler system cost?
On average, a professionally installed in-ground sprinkler lawn irrigation system costs between $1,800 to $3,500. For larger and more complex landscapes, the cost can exceed $5,000. In-ground Sprinkler Sample Project.
How to tell if your sprinkler system needs repair?
To Winterize:
- See if your system has auto-drain valves. ...
- If you have manual drains, you'll need to use an air compressor with pressure between 50 and 100 PSI. ...
- Open the valve manifolds to allow any remaining water to drain.
- Hook up the air compressor and run air through each zone in your system until you've cleared all zones of water.
How much to install a sprinkler system?
To estimate costs for your project:
- Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.
- Specify Project Size and Options Enter the number of "square feet" required for the project.
- Re-calculate Click the "Update" button.
How much does it cost to have my sprinkler system blown out?
about $80 to $85Cost to Blow Out Sprinkler System Hiring a pro to winterize your system will require about $80 to $85. Plumbers usually prefer to "blow out" the sprinkler because it works for almost all systems. This involves an air compressor to force the water out.
How much does it cost to replace a sprinkler control valve?
Sprinkler System Repair Cost by Type of ReplacementType of ReplacementAverage Replacement CostValve$85 - $150Manifold$100 - $225Controller$100 - $300Pump$200 - $5006 more rows•Jun 6, 2022
How long does a sprinkler system last?
20 yearsWhile different parts of your system may need replacing throughout its life, you can expect the average sprinkler system to last for upwards of 20 years. During that time, you'll likely need to replace your sprinkler heads around the 10-year mark if using high-quality heads.
How much does it cost to replace a sprinkler solenoid?
Sprinkler Systems Repair CostsNational Average Cost$212Minimum Cost$75Maximum Cost$500Average Range$75 to $250
How much is a sprinkler valve cost?
The cost to replace a sprinkler valve runs about $12.50 to $40 each for most models, plus labor expenses. The valve controls the release of water to the various zones in the yard.
How do you replace an inground sprinkler system?
0:424:51Replace SPRINKLER HEAD in 5 Minutes - Rainbird - Hunter - OrbitYouTubeStart of suggested clipEnd of suggested clipYou don't need to go all the way down because you could actually cut the sprinkler line. And if yourMoreYou don't need to go all the way down because you could actually cut the sprinkler line. And if your knife is thick enough you can use it to pry this doughnut out or just use your hands.
How do you fix an old sprinkler system?
0:522:223 Most Common Lawn Sprinkler System Repairs - YouTubeYouTubeStart of suggested clipEnd of suggested clipCreating a big wet spot right next to the sprinkler head another easy repair we just replace theMoreCreating a big wet spot right next to the sprinkler head another easy repair we just replace the sprinkler head or really no parts that can be replaced.
How often should you replace your sprinkler system?
between 20 to 25 yearsGenerally speaking, residential lawn sprinklers can last anywhere between 20 to 25 years depending on how well your system was installed and maintained. Your sprinklers' longevity also depends on where you live.
Do sprinklers add value to home?
A sprinkler system indirectly increases a home's market value by enhancing the home's overall curb appeal. Since attractive landscaping requires sufficient watering, an automatic sprinkler system ensures the protection of your investment.
How do I know if my sprinkler solenoid is bad?
Signs You Have a ProblemThe Water Won't Shut Off. If you have this problem, it's very likely the solenoid. ... Low or Uneven Water Pressure. The solenoid controls the water pressure. ... Water Leaks. There are many points in a sprinkler system that can leak. ... Current Testing. ... Valve Inspection. ... Parts Replacement.
How do you know if a sprinkler valve is bad?
Signs of issues in sprinkler valve:Water not turning Off: If you notice that water is not closing off from the sprinkler, then there seems to be an issue in the diaphragm valve. ... Leaks of water: ... Broken Sprinkler Head. ... Stuck Valve. ... Wiring: ... Irregular Watering:
Why would one sprinkler zone not work?
If only one zone isn't working, the field wire is damaged. If none of the zones in a control valve box is working, the common wire is damaged, although the field wires could also be bad.
When should you replace sprinkler valves?
Signs of issues in sprinkler valve:Water not turning Off: If you notice that water is not closing off from the sprinkler, then there seems to be an issue in the diaphragm valve. ... Leaks of water: ... Broken Sprinkler Head. ... Stuck Valve. ... Wiring: ... Irregular Watering:
How do you replace a bad sprinkler valve solenoid?
0:211:26Replacing the Solenoid: Rain Bird Residential Valve TroubleshootingYouTubeStart of suggested clipEnd of suggested clipFirst shut off the main water supply to your irrigation. System disconnect the wires to the solenoidMoreFirst shut off the main water supply to your irrigation. System disconnect the wires to the solenoid. By cutting them or by unscrewing the wire nuts. Turn the solenoid counter clockwise to remove.
How do you fix a sprinkler valve?
0:3313:41Fixing A Sprinkler Valve "Quick Fix," No Glue - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the tops on the sprinkler valve that's already down in the ground. And it needs to have itMoreWith the tops on the sprinkler valve that's already down in the ground. And it needs to have it replaced because the valves leaking it won't shut off with the timer. So.
How do you replace a main sprinkler valve?
0:443:34How to Replace a Sprinkler Valve Diaphragm - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the solenoid looks good then remove the screws securing the bonnet to the valve you. May alsoMoreIf the solenoid looks good then remove the screws securing the bonnet to the valve you. May also have a jar table valve that unscrews just as the name implies.
How much does it cost to fix a sprinkler system?
The average cost to repair your sprinkler system is $75–$250, with the average homeowner paying $212, which includes an hourly labor cost of about $75 by a professional plumber. Most sprinkler repairs involve replacing sprinkler heads at $5 to $20 per head, or replacing valves at $20 to $40 per valve, not including the cost of labor.
How much does it cost to replace a sprinkler valve?
The cost to replace a sprinkler valve is around $65–$290 which includes labor. This could be caused by debris in the valve or a broken valve, so the valve will need to be located, possibly excavated, and cleaned out or replaced. Sometimes, valves can be rebuilt instead of replaced.
Why do sprinklers need to be fixed?
The main reasons your sprinkler system will need to be fixed can include a damaged backflow preventer, faulty valves, broken sprayer heads, a malfunctioning sprinkler system controller, and/or broken or leaking pipes.
How much does it cost to install a sprinkler system controller?
Installing a new sprinkler system controller and timer will cost $150 to $225 on average, plus labor. However, your technician may only need to reprogram or rewire your unit, at an average cost of $80. If wiring is an issue you can expect to pay $1 per sq. ft. including labor, and sometimes you may need to hire an electrician at $50 to $80 per hour.
How much does a fire sprinkler system cost?
A fire sprinkler system costs $2–$7/sq. ft. to install in an existing building.
Why do insurance companies discount sprinkler systems?
Many insurance companies offer a discount by having your sprinkler system in working order—because of its ability to slow down the spread of an outdoor fire.
How much does it cost to replace a backflow prevent?
Replacing a backflow prevent costs around $150 to $400 just for the part, plus $50 to $200 for professional labor expenses. A state-certified backflow tester will need to check out the problem and provide a solution.
How Much Does It Cost to Repair a Sprinkler System per Hour?
Expect to pay an average of $75 per hour for a plumber to repair your sprinklers, with a range of $50 to $100 per hour. How much a plumber will get done in an hour depends widely on the kind of work they're doing.
How much does it cost to replace a sprinkler head?
Replacing sprinkler heads runs $2.50 to $18 per head for most types, plus a range of $50 to $100 per hour for labor by a professional plumber. Some heads can cost as much as $30 each, and brass valves range to $100 or more.
What Kind of Sprinkler Repair Can I Get on My Budget?
Most homeowners can afford simple sprinkler fixes, but what if you need a total system overhaul? Here’s how much of your system you can get repaired, depending on your budget.
What Factors Influence the Cost to Repair a Sprinkler System?
The cost to repair a sprinkler system boils down to four main factors: how big your sprinkler system is, how big the problem is, what type of sprinkler head you use (and other parts), and how difficult it will be for a plumber to access the area that needs repairing.
Why would a sprinkler system stop working?
If your sprinkler system has suddenly stopped working, check to see if the backflow valve has inadvertently been shut off. If that doesn't work, check the wiring to see if there are any cuts or disconnections. Sometimes, a quick check like this can solve the issue; if not, a plumber can diagnose the problem.
How do you know if your sprinkler system is leaking?
A telltale sign that your sprinkler is leaking is if you notice a lot of water pooled around the individual sprinkler, or just notice that it's a lot more muddy and marshy than other parts of your lawn. You might also notice bubbling water coming up from the ground.
How much to replace a backflow valve?
Before removing this part, ask a pro to confirm whether the problem results from broken equipment, faulty wiring or both. Sometimes, wiring gets disconnected or damaged, causing valve malfunction. In this case, you may need to pay to fix the wiring but not necessarily the valve. Installing a new backflow preventer costs $125 to $900 for the part, plus labor. This tool keeps water from flowing back toward the supply source. Annual testing ranges from $50 to $100 and can help ensure that the preventer continues to perform.
How much does it cost to replace a sprinkler system?
The cost to repair a sprinkler system ranges from $131 and $390, averaging $256. Replacing sprinkler heads runs $2.50 to $18 per head for most types, plus a range of $50 to $100 per hour for labor by a professional plumber. Valve replacement averages about $12.50 to $40 per valve in addition to labor. Some heads can cost as much as $30 each, and brass valves range to $100 or more.
How much does it cost to fix an irrigation system?
With a range of $125 to $375, the cost of irrigation repair often depends on the part. Repair for a broken piece usually requires replacement, especially for less-expensive components. Plumbers typically mark up the price they pay for the parts by 25-50%, in addition to the average $50 to $100 per hour for labor.
What is a sprinkler system?
Sprinkler systems are a great way to maintain your lawn. They take the hassle out of managing it yourself and ensure that the lawn gets evenly watered at the right time of day. If you start having problems with your system, it can be tough to figure out what to do.
How much does it cost to install a backflow preventer?
Installing a new backflow preventer costs $125 to $900 for the part, plus $25 to $250 for professional installation. This tool keeps water from flowing back toward the supply source. Annual testing ranges from $50 to $100 and can help ensure that the preventer continues to perform.
How much does it cost to fix a burst water pipe?
In colder temperatures, an improperly-winterized system can cause a pipe to freeze or break. The cost to repair a burst pipe ranges from $150 to $350, not including the expense to fix water damage. This system consists of interconnected pipes both above and below ground, so the location of the burst pipe will impact the price. You'll need to find a plumber who can locate the problem and complete the repair.
How much does it cost to hire an electrician?
Sometimes, you may need an electrician. The expense to hire an electrician runs $50 to $100 per hour. Before making the call, confirm that the timer program is set correctly for each zone. If you feel comfortable doing so, turn off power to the circuit and check the wiring on the controller.
How much does it cost to fix a sprinkler system?
Sprinkler system repairs tend to cost between $70 and $85, with a national average cost of $75. Low-end sprinkler repair can cost as little as $45 to $65, while high-end repairs can range from $91 to $300.
How to save money on sprinkler system repairs?
How to save money on future repairs. Stay on top of irrigation and sprinkler maintenance to prevent expensive repairs down the road. Follow these tips to save money on sprinkler system repair: Clean your sprinkler heads and valve to remove dirt, grime and other residues. Keep tabs on the water pressure.
What happens if your sprinkler system leaks?
If you've noticed that your sprinklers have a leak, the water pressure is low, the valve is broken or the sprinkler head is clogged, it might be time to enlist a contractor's help. The cost of sprinkler system repairs will depend on several different factors covered in the sections below. However, one of the most important factors is where you live.
How much does a sprinkler guy cost?
The Sprinkler Guy: $35 per 30 minutes after the first hour. There are potential downfalls to both flat and hourly cost estimates for irrigation system repair. While a flat rate makes it easier to budget, a company may like to err on the side of caution when deciding on the fee.
How long does a sprinkler system last?
A sprinkler system should last around 20 years. However, this figure will vary with the regularity of your inspections, the climate and use of the system.
How much does Eric's Handyman charge for travel?
If a job site is outside the company's service range, there may be an additional travel fee. For example, Eric's Handyman Services charges a $10 travel fee for each day after the first day of work when a repair site is outside the service area.
Do sprinkler repair techs charge hourly?
flat rates can have on your project. Some sprinkler repair techs may charge a flat rate based on the size of the sprinkler system or the parts needed, while others provide an hourly estimated cost.
How much does a sprinkler system cost?
Sprinkler systems cost $500 to $1,000 per zone with installation. The average yard requires at least 3 to 5 zones. Irrigation zones are areas of the yard with different watering needs based on sun exposure and whether they feature turf, shrubs, or flower beds.
What is sprinkler repair?
Sprinkler repair services can typically fix leaks, broken pipes and heads, and faulty components before replacing the entire system.
How much does it cost to install irrigation systems?
Commercial irrigation systems cost $1,000 to $7,000 per acre to install and typically include a combination of furrow, drip, and pivot irrigation. Commercial irrigation systems cost less per acre than residential irrigation systems because the price per acre drops for large-acreage projects.
How long does it take to install a sprinkler system?
Installing a sprinkler system takes 1 to 3 days on average, depending on the yard size and number of zones.
What is an in ground sprinkler system?
In-ground sprinkler systems are the most common and feature sprinkler heads connected to underground pipes.
How many sprinkler heads can be in one zone?
Never put different sprinkler head types in the same irrigation zone. They have different flow rates and water application rates. A single zone may support 1 to 9 sprinkler heads, depending on the water pressure, flow rate, and type of heads.
How much does an in ground sprinkler system increase the value of a home?
A well-maintained lawn with an in-ground sprinkler system increases a home's property value by 7% to 15% on average. An automated sprinkler system maintains curb appeal and conveys convenience to potential home buyers.
How much does an in ground sprinkler system cost?
A standard in-ground sprinkler system ranges in price from $1,740 to $3,400, while an above-ground system can run $1,800 to $2,000 for a 1-acre plot. The addition of an automatic controller will cost an extra $10 to $325. An automatic controller can be added to either an in-ground or above-ground system.
How much does a sprinkler permit cost?
Typically, if a permit is required, it may only be necessary for an in-ground system, not an above-ground system. A permit could run as much as $200. If the home is located in a neighborhood with a homeowners association (HOA), check with the HOA board before hiring an installer. Potential rules about the type of sprinkler system permitted in the HOA may affect the cost.
What factors affect the final tally of a sprinkler system?
Factors such as the type of soil in the yard, whether the sprinkler system will be part of a larger landscaping project, or whether additional lawn services are needed will all affect the final tally. The type and quality of the installed components (valves and sprinkler heads) also play a significant role.
Why do you need a sprinkler system?
A sprinkler system encourages a uniform and healthy lawn, boosts curb appeal, and increases the home’s value and appeal to buyers. A professional appraiser will usually increase the home’s value if the landscaping and lawn are in top shape.
How much water does a sprinkler head water?
On average, a pop-up sprinkler head will water up to 300 square feet of la wn. An installer will decide the optimal number of heads by factoring in water pressure in gallons per minute (GPM) and the flow rate for each head. Q.
How tall is a sprinkler head?
Sprinkler heads come in various sizes ranging from 2 inches to 20 inches tall, but the general rule is to install any head so its highest point retracts below the surface of the soil when the system is not watering.
How much does it cost to install a drip system?
For a 1-acre yard, expect to pay about $10,280 for an in-ground system, $1,800 to $2,000 for an above-ground system, and $1,800 to $2,500 for a drip system. Automating any of these systems will add another $10 to $325.
