how to fix automatic repair boot loop in windows 10

How to Fix a Windows 10 Automatic Repair Loop

1. Disconnect or Remove Recently Installed or Connected Devices
2. Run System Repair Tools (Chkdsk, SFC)
3. Run the Windows 10 DISM tool
4. Disable Automatic Startup Repair to Limit Boot Loops

Full Answer

How to fix Windows 10 automatic repair?

How to Repair Windows 10 Using Automatic Repair

1. Open Windows Settings. Go to Start icon on the extreme bottom left and type Settings.
2. Go to Update & security. Tap on Settings option and choose Update & security option from there.
3. Restart from Advanced start-up. Tap on Recovery on left side option. ...
4. Troubleshoot the PC. ...
5. Go to Advanced options. ...
6. Click on Start-up Repair. ...
7. Choose the option “Continue”. ...

How to disable automatic repair on Windows 10?

So, here is how to go about it:

• Open the Control Panel, choose System, and then select Advanced System Settings.
• Look for the Advanced tab and head into the Startup and Recovery section. ...
• In the dialog box that will appear, head on down to the System failure section and proceed to uncheck the Automatic Restart checkbox.
• Click OK to apply and save the changes.

How to fix Windows 10 boot loop after system update?

Top 3 Ways to Fix Boot Loop in Windows 10

• Solution 1: Refresh Your PC to Fix Windows 10 Boot Loop. To fix Windows boot loop issue, you can try the following steps. ...
• Solution 2: Remove Bad Registry Entry to Fix Windows 10 Reboot Loop. The corrupt registry entry will affect the performance of Windows 10. ...
• Solution 3: Fix Windows Boot Loop with Windows Boot Genius. ...

How to run Windows 10 Startup Repair?

The Tutorial to Launch Startup Repair in Windows 10

1. Boot to Advanced Startup Options.
2. Click/tap on Troubleshoot.
3. Click/tap on Advanced options.
4. Click/tap on Startup Repair.
5. If prompted, select an administrator account to provide credentials for approval. ...
6. Start Repair will now start "Diagnosing your PC", and attempt to automatically repair it.

More items...

How do you fix an infinite boot loop preparing automatic repair?

If the above trick fails, try the following solutions.Method 2. Boot your computer in Safe Mode. ... Method 3. Rebuild BCD with the Command Prompt. ... Method 4. Disable Automatic Repair at boot. ... Method 5. Run the Fixboot and Chkdsk commands. ... Method 8. Restore the Windows Registry. ... Method 9. Reset or Refresh Windows 10.

What causes automatic repair loop Windows 10?

A bad system update, a new graphics card, corrupted system files, even a fresh USB mouse—any of these can cause a dreaded Windows 10 automatic repair loop to occur when you're trying to boot up a Windows PC.

How do you stop automatic repair loops?

How to Disable Windows 10 Automatic Repair at StartupOpen the Command Prompt as administrator and run the bcdedit command: ... To disable automatic repair at Windows 10 startup, execute this command: bcdedit /set {current} recoveryenabled no.More items...

What causes startup repair loop?

Boot sector viruses and other malware that targets the bootloader or the booting chain can cause errors in the bootloader settings and state that result in an infinite loop of Startup Repair. The virus may then block Startup Repair from either launching or carrying out its repairs successfully.

How do I fix startup repair?

First, power the computer completely down. Next, turn it on and keep pressing the F8 key as it boots. You'll see the Advanced Boot Options screen, which is where you would launch Safe Mode from. Select “Repair Your Computer” and run startup repair.

How do you fix the automatic repair loop 2022?

0:564:18【2022】How to Fix Automatic Repair Loop in Windows 10/11? - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf it detects errors it will automatically repair them while windows can't boot you can still forceMoreIf it detects errors it will automatically repair them while windows can't boot you can still force windows to boot to a command prompt window using the advanced. Options menu.

How do I fix Windows 10 automatic repair couldn't repair my computer?

How do I fix Windows 10 automatic repair couldn't repair your PC?Run fixboot and/or chkdsk command. ... Run DISM. ... Delete the problematic file. ... Disable Automatic Startup Repair. ... Restore Windows registry. ... Check device partition and osdevice partition. ... Disable early launch anti-malware protection. ... Perform Refresh or Reset.More items...•

What Causes a Windows 10 Automatic Repair Loop?

There isn’t a single cause for a Windows 10 automatic repair loop, but there are several situations that are likely to cause it. Missing or corrupted system files are one of the more common causes, where Windows can’t boot (or repair itself) because these essential files it needs to run aren’t available.

Why is my Windows 10 auto repair looping?

If you recently installed new hardware before a Windows 10 automatic repair loop began to appear, then the hardware you’ve installed is a likely cause of the problem.

How to get Windows to boot into safe mode?

Once Windows boots up in Safe Mode, right-click the Start menu and select Windows PowerShell (Admin). In the PowerShell window, type DISM /Online /Cleanup-Image /RestoreHealth and allow the process to complete, which could take some time.

How to boot to a minimal version of Windows?

In the Troubleshoot menu, select the Advanced options option. Select Command Prompt in the Advanced options menu to boot to a minimal version of Windows, showing only a command prompt window.

How to open command prompt in Windows 10?

In the boot troubleshoot menu, select Troubleshoot > Advanced options > Command Prompt, then wait for the command line window to open. You may need to authenticate with your local or Microsoft account password first.

How to check system drive for errors?

In the command prompt window, type chkdsk /r c: to begin a low-level check of your system drive for errors using the Check Disk utility. If it detects errors, chkdsk will automatically repair them (if possible).

How to restore health in PowerShell?

In the PowerShell window, type DISM /Online /Cleanup-Image / RestoreHealth and allow the process to complete, which could take some time.

What happens if you create a restore point before the automatic repair loop occurs?

If you have created a Windows restore point before the Automatic Repair loop occurs, you can perform a system restore to cope with the issue.

What is the solution to an endless 'Preparing Automatic Repair' loop?

The official Microsoft solution to an endless 'Preparing Automatic Repair' loop is to refresh or reset the PC directly.

How to make a bootable disk with easeus partition master?

To create a bootable disk of EaseUS Partition Master, you should prepare a storage media, like a USB drive, flash drive or a CD/DVD disc. Then, correctly connect the drive to your computer. Step 2. Launch EaseUS Partition Master, find the "WinPE Creator" feature on the top.

How to create a bootable disk on Windows 10?

Connect the USB drive to PC, launch EaseUS Data Recovery Wizard WinPE Edition. Select the USB drive and click "Create" to create a bootable disk.

What is the best tool to extend the system partition?

To make more free space for the system and applications, professional partition tool - EaseUS Partition Master can extend the system partition from a bootable disk and rescue the computer from a blue screen of Automatic Repair error:

How to change boot sequence in BIOS?

For most users, it works well when they restart their computer and press F2 at the same time to enter BIOS. Set to boot the PC from "Removable Devices" (bootable USB disk) or "CD-ROM Drive" (bootable CD/DVD) beyond Hard Drive. Press "F10" to save and exit.

What is the best recovery software for Windows 11?

EaseUS Data Recovery Wizard is the best data recovery software for Windows 11. Use it to retrieve deleted, lost, formatted, corrupted data quickly.

What to do if bootrec.exe doesn't fix auto repair loop?

If the bootrec.exe command doesn't fix the automatic repair loop, some suggest that you should run chkdsk commands as well.

How to get out of auto repair loop?

Perform Command Prompt. If you see "your PC did not start correctly", you can go into Boot Options menu and use Command Prompt to get out of automatic repair loop. Step 1. Click Advanced Options; Choose Troubleshoot > Advanced Options > Command Prompt;

What Is Automatic Repair Loop and Why Does It Happen?

The tool is designed to launch automatically when a start-up problem comes up on Windows system.

Why does my computer go into auto repair?

Normally, by running Automatic Repair, Windows diagnoses the start-up problem (missing or corrupt system files, drivers, registry settings, etc.), fix it and then restart the PC automatically. But when Windows didn't shut down properly, it gets into automatic repair loop. For example, if your PC powered off improperly because of a power outage, system crash, data in the registry could be incomplete and corrupt, which lead to the automatic repair loop.

How to fix a computer that is stuck in repair loop?

Sometimes, your PC gets stuck at automatic repair loop or is attempting repair forever because Windows thinks that there is a problem with your PC while there is not, so you may just restart the PC. Step 1. Restart the PC and keep pressing F8 to get it into Windows Boot Manager. Step 2.

Why won't my computer repair?

When Windows shows "Windows Automatic Repair couldn't repair your PC", it could indicate a corrupted registry on your computer. Therefore, you can get your Windows out of automatic repair loop by restoring the registry from RegBack directory.

How to disable auto repair tool?

When all else fails, disable the automatic repair tool using the following steps: Insert a Windows installation disc/media in your PC. Select your language preferences, and click “Next”. Click on “Repair your computer”. Click on “Troubleshoot”. Click on “Advanced Options”. Click on “Command Prompt”.

What is automatic repair?

Automatic repair is a Windows system-recovery tool that diagnoses and troubleshoots common boot errors in Windows 8 and above systems.

How to retrieve files from Windows 10 backup?

Click “OK”. Click “Save settings”. Click “Exit”. To retrieve individual files or entire system data from a backup on Windows 10, use the following steps: Open Settings. Click on “Update & Security”. Click on “Backup”. Under the "Looking for an older backup" section, click on “Go to Backup and Restore”.

How does system restore work?

System Restore rolls your system software back to its previous state by overwriting files on your PC’s local drive.

How to set up backup option in Windows 10?

Under the "Backup or restore your files" section , select “Set up backup option” option

How to backup Windows 10?

To configure automatic backups on Windows 10, use the following steps: Open Settings and click on “Update & Security”. Click on “Backup”.

How to fix auto repair loop?

8 Solutions - Fix Preparing Automatic Repair Loop Windows 10 1 Remove the battery and AC adapter. 2 Press and hold the power button for 20 seconds and see if it will boot up normally.

How to fix a computer that won't boot?

If your Windows cannot boot because of the "Preparing Automatic Repair" or "Diagnosing your PC" error, you can do a hard reboot. Remove the battery and AC adapter. Press and hold the power button for 20 seconds and see if it will boot up normally.

How to make a bootable CD?

Step 1. Create bootable CD/DVD discs or USB flash drive by using MiniTool Bootable Media Builder.Install your MiniTool Power Data Recovery Personal Deluxe in a normal computer, and then click Bootable Media in the lower part of the main interface.

How to re-build a boot record?

Step 1. Insert the Windows bootable installation disk into your PC that has "Preparing Automatic Repair" or "Diagnosing your PC" error message. Step 2. Boot your PC from the installation disk. Step 3.

What is automatic repair?

Automatic Repair is a feature introduced in Windows 10/8 that can fix some PC issues when the computer cannot boot properly.

How to install Windows 10 on a Windows 10 laptop?

Step 1: Turn off your computer. Step 2: Insert the Windows bootable installation disk to your PC and boot from it. Step 3: When prompted to Press any key to boot from CD or DVD, press any key to continue. Step 4: Select your language preferences in the Windows Setup interface, and click on Next button to continue.

Does MiniTool Bootable Media Builder work with USB?

Note: MiniTool Bootable Media Builder will format the USB flash drive or CD/DVD discs while building MiniTool Bootable Disc. Please make sure to back up all important data on the USB drive or CD/DVD disc before burning.

How to fix a computer that is stuck in a repair loop?

To reset a Windows 10 PC, select Troubleshoot under the Advanced Repair option and then select Reset this PC. If resetting the PC option also does not help, install a fresh copy of Windows 10 on your PC.

Why does Windows 10 run an auto repair tool?

Sometimes, Windows 10 runs Automatic Repair tool at boot up whenever there is an issue with a system file or failed software update causing issues with Windows 10 boot.

How to disable auto repair tool?

To disable Windows 10 Automatic Repair tool, follow these steps. Step 1: Boot into Windows by pressing the F8 key. Step 2: Again, select the Command Prompt option.

How to restart a laptop in safe mode?

Boot into safe mode and follow these steps: Step 1: Turn off your Windows 10 laptop. Step 2: Now click on the Power Button. Immediately after clicking the Power Button, press the F8 key and then select ‘See advanced repair options.’. Step 3: Go to Troubleshoot > Advanced options > Startup Settings > Restart.

How to overwrite files in Windows 10?

Step 1: Boot into the Command Prompt option by going into Advanced Repair Options . Step 2: In the Command Prompt, enter the following command. C:WindowsSystem32configregback* C:WindowsSystem32config. Step 3: If you’re asked to overwrite files, type All and press Enter.

Why does my Windows 10 computer stop working?

Windows 10 PC runs fun until a bad system update, a corrupted file, and even a driver update can cause your it to stop working abruptly . When you reboot your computer, the Windows 10 gets stuck in the automatic repair loop. You can fix your Windows 10 device stuck in an automatic repair loop using these solutions.

How to check for malware on Windows 10?

Step 1: Again, turn off your computer, and turn it on while pressing the F8 key. Step 2: Now, instead of choosing Startup Settings, select the Command Prompt option. This will directly take you to a Command Prompt. Step 3: In the Command Prompt, enter the following to start a ‘low-level’ check of your Windows’ files.

How to fix Windows 10 auto repair loop?

1. Use the installation media, whether a DVD or USB drive, and connect to the system. 2. From the options, select boot from the installation media. 3. Wait till the files are copied. 4. From the setup screen, click "Next " to fix Windows 10 automatic repair loop. 5.

What to do if Windows 10 preparing automatic repair loop persists even after the above methods?

If windows 10 preparing automatic repair loop persists even after the above methods, you must refresh or reset your PC. The steps include the following:

How to set bcdedit to current?

Follow the steps below to proceed: 1. Search command prompt in the search window and open the application as an administrator. 2. In the command prompt screen, enter the following command and hit the "Enter" key: " bcdedit /set {current} recoveryenabled No ". 3.

How to fix boot loop of death?

The steps include: 1. Right-click on the Windows symbol at the bottom and select "Command Prompt (Admin)" from the list. 2.

What is Windows startup repair tool?

The Windows Startup Repair tool is an excellent feature to fix problems that are preventing the PC from starting in the normal mode. Although it may not resolve issues related to hardware, it is an excellent place to begin the troubleshooting procedure. The steps include:

What is safe mode in Windows 10?

The Safe Mode present in Windows 10 helps you start the computer with the necessary programs and services. It is feasible to fix a few problems related to the system in this mode. You will need a Windows installation DVD or installation media to repair the error. Prepare one and then proceed with the following steps:

Can you restore the registry?

Restoring the Windows registry could solve most of the problems, including the automatic repair loop. You can utilize the command prompt window to perform the task. The steps are as follows: