how to fix windows 10 repair loop

[Solution] How to Fix Automatic Repair Loop in Windows 10

1. 1. Restart Your PC. Sometimes, your PC gets stuck at automatic repair loop or is attempting repair forever because Windows thinks that there is a ...
2. Step 1 Restart the PC and keep pressing F8 to get it into Windows Boot Manager.
3. Step 2 Highlight Windows 10 and hit Enter to restart the PC into Windows 10.
4. 2. Perform Command Prompt. If you see "your PC did not start correctly", you can go into Boot Options menu and use Command Prompt to get out of ...
5. Step 1 Click Advanced Options; Choose Troubleshoot > Advanced Options > Command Prompt;

Full Answer

How to fix Windows 10 stuck in endless reboot loop?

Windows 10 might get stuck in a infinite loading Windows cycle. The following workaround may help with this problem: Hold the FN (Function key) down while powering on the system. Still holding the FN key, start tapping the Windows key to bypass the issue. This should bring up the login screen.

How to fix Windows 10 boot loop problem?

You Got a Black Screen

• Method 1. Perform a Hard Reboot. When the computer doesn't respond, perform a hard reboot first. ...
• Method 2. Refresh or Reset PC. ...
• Method 3. Boot into Safe Mode. ...
• Method 4. Run System File Checker Tool. ...
• Method 5. Rebuild BCD. ...
• Method 6. Disable Automatic Repair. ...
• Method 7. Extend the System Partition. ...

How to start automatic repair Windows 10?

How to initiate startup repair from the desktop or lock screen

• Click Start.
• Click the power button icon.
• Press and hold down the Shift key and then click Restart. ...
• Select Troubleshoot.
• Go to Advanced Options > Startup Repair.
• After the startup repair process is complete, reboot the computer.
• If the computer fails to boot into the operating system, initiate startup repair using the Windows installation disk.

How do I fix automatic repair in Windows 10?

How to Repair Windows 10 Using Automatic Repair

1. Open Windows Settings. Go to Start icon on the extreme bottom left and type Settings.
2. Go to Update & security. Tap on Settings option and choose Update & security option from there.
3. Restart from Advanced start-up. Tap on Recovery on left side option. ...
4. Troubleshoot the PC. ...
5. Go to Advanced options. ...
6. Click on Start-up Repair. ...
7. Choose the option “Continue”. ...

How do I fix the endless reboot loop in Windows 10?

With Windows 10 stuck in the reboot loop, all you need to do is insert the installation media. Alternatively, access the UEFI/BIOS (tap Del, F8, or F1 when the system boots) and find the boot manager. Select the recovery partition as the primary device, then restart the computer.

How do I stop the startup repair loop?

Fix #2: Disable Automatic RestartRestart your computer.Wait for your BIOS to complete POST (the screen with your manufacturer logo and/or system information)Quickly begin tapping F8 repeatedly, until you see the list of boot options.Choose “Disable automatic restart on system failure”More items...

What causes automatic repair loop?

A bad system update, a new graphics card, corrupted system files, even a fresh USB mouse—any of these can cause a dreaded Windows 10 automatic repair loop to occur when you're trying to boot up a Windows PC.

How do I fix startup repair couldn't repair my computer?

How to fix Automatic Startup Repair couldn't repair your PCRebuild BCD & Repair MBR.Run chkdsk.Run SFC and Use DISM Tool in Safe Mode.Disable Early launch anti-malware protection.Disable Automatic Startup Repair.Restore registry from RegBack directory.Reset This PC.

What do I do if Windows Startup Repair doesn't work?

If you cannot use Startup Repair, then your option is to disable automatic restart, run chkdsk and rebuild bcd settings....Type following command lines and press Enter after each to fix Startup Repair stuck issue:bootrec /fixmbr.bootrec /fixboot.bootrec /rebuildbcd.

How to fix a computer that is stuck in repair loop?

Sometimes, your PC gets stuck at automatic repair loop or is attempting repair forever because Windows thinks that there is a problem with your PC while there is not, so you may just restart the PC. Step 1. Restart the PC and keep pressing F8 to get it into Windows Boot Manager. Step 2.

Why does my computer go into automatic repair loop?

For example, if your PC powered off improperly because of a power outage, system crash, data in the registry could be incomplete and corrupt, which lead to the automatic repair loop .

How to get out of auto repair loop?

Perform Command Prompt. If you see "your PC did not start correctly", you can go into Boot Options menu and use Command Prompt to get out of automatic repair loop. Step 1. Click Advanced Options; Choose Troubleshoot > Advanced Options > Command Prompt;

What to do if Windows 10 is in a repair loop?

This may lose your local saved files, so be sure to back up your hard drive before you begin.

How to boot to a minimal version of Windows?

In the Troubleshoot menu, select the Advanced options option. Select Command Prompt in the Advanced options menu to boot to a minimal version of Windows, showing only a command prompt window.

How to get Windows to boot into safe mode?

Once Windows boots up in Safe Mode, right-click the Start menu and select Windows PowerShell (Admin). In the PowerShell window, type DISM /Online /Cleanup-Image /RestoreHealth and allow the process to complete, which could take some time.

How to force Windows to boot to command prompt?

To do this, restart your PC and press the F8 key on your keyboard before the Windows logo and spinning icon appears ( you may need to repeat this step a few times).

Can Windows repair itself?

If certain files become corrupted, Windows will replace them with the local image, but if this image itself has become corrupted, Windows can’t repair itself.

What happens when the registry is corrupted?

When Registry corrupts, it may lead to serious problems like the Automatic Repair loop. The good news is that the registry makes a backup of configuration data automatically. You can use the backup to restore the Windows registry to a working version. Step 1.

What happens when an auto repair fails?

When an Automatic Repair fails, your computer will get a blue screen with "Your PC did not start correctly" or "Automatic repair couldn't repair your PC." If you click "Restart", the computer will go through the same process, resulting in the Automatic Repair loop.

How to make a bootable disk with easeus partition master?

To create a bootable disk of EaseUS Partition Master, you should prepare a storage media, like a USB drive, flash drive or a CD/DVD disc. Then, correctly connect the drive to your computer. Step 2. Launch EaseUS Partition Master, find the "WinPE Creator" feature on the top.

How to change boot sequence in BIOS?

For most users, it works well when they restart their computer and press F2 at the same time to enter BIOS. Set to boot the PC from "Removable Devices" (bootable USB disk) or "CD-ROM Drive" (bootable CD/DVD) beyond Hard Drive. Press "F10" to save and exit.

What to do if your computer is black?

Perform a Hard Reboot. When the computer doesn't respond with a black screen, warning "Preparing Automatic Repair", perform a hard reboot first. A hard reboot is a way or restarting your computer manually instead of using the operating system controls (soft reboot). Step 1.

What is the Windows system file checker?

Windows provides a built-in System File Checker and CHKDSK Disk Utility for users to check and repair missing or corrupted system files.

How to disable auto repair tool?

When all else fails, disable the automatic repair tool using the following steps: Insert a Windows installation disc/media in your PC. Select your language preferences, and click “Next”. Click on “Repair your computer”. Click on “Troubleshoot”. Click on “Advanced Options”. Click on “Command Prompt”.

How to retrieve files from Windows 10 backup?

Click “OK”. Click “Save settings”. Click “Exit”. To retrieve individual files or entire system data from a backup on Windows 10, use the following steps: Open Settings. Click on “Update & Security”. Click on “Backup”. Under the "Looking for an older backup" section, click on “Go to Backup and Restore”.

How to backup Windows 10?

To configure automatic backups on Windows 10, use the following steps: Open Settings and click on “Update & Security”. Click on “Backup”.

How to backup a file?

Under the "Looking for an older backup" section, click on “Go to Backup and Restore”. Under the "Backup or restore your files" section, select “Set up backup option” option. Select a backup destination (removable drive) to store your automatic backups. Click “Next”.

How to fix a computer that is stuck in a repair loop?

To reset a Windows 10 PC, select Troubleshoot under the Advanced Repair option and then select Reset this PC. If resetting the PC option also does not help, install a fresh copy of Windows 10 on your PC.

How to disable auto repair tool?

To disable Windows 10 Automatic Repair tool, follow these steps. Step 1: Boot into Windows by pressing the F8 key. Step 2: Again, select the Command Prompt option.

How to overwrite files in Windows 10?

Step 1: Boot into the Command Prompt option by going into Advanced Repair Options . Step 2: In the Command Prompt, enter the following command. C:WindowsSystem32configregback* C:WindowsSystem32config. Step 3: If you’re asked to overwrite files, type All and press Enter.

Why does my Windows 10 computer stop working?

Windows 10 PC runs fun until a bad system update, a corrupted file, and even a driver update can cause your it to stop working abruptly . When you reboot your computer, the Windows 10 gets stuck in the automatic repair loop. You can fix your Windows 10 device stuck in an automatic repair loop using these solutions.

How to check for malware on Windows 10?

Step 1: Again, turn off your computer, and turn it on while pressing the F8 key. Step 2: Now, instead of choosing Startup Settings, select the Command Prompt option. This will directly take you to a Command Prompt. Step 3: In the Command Prompt, enter the following to start a ‘low-level’ check of your Windows’ files.

How to restart a laptop in safe mode?

Boot into safe mode and follow these steps: Step 1: Turn off your Windows 10 laptop. Step 2: Now click on the Power Button. Immediately after clicking the Power Button, press the F8 key and then select ‘See advanced repair options.’. Step 3: Go to Troubleshoot > Advanced options > Startup Settings > Restart.

Methods to Fix Automatic Repair Loop in Windows 10 Precisely

The oncoming sessions of this write-up will include the best and safest ways to fix Automatic Repair loop in Windows 10. Apply these fixes one by one until you get rid of the issue.

Jay Galiyal

Jay is an incredible writer who loves to give life to words. He is always carrying out some research and likes to keep himself updated with the happenings around him. Writing runs in his blood makes him happy.

Subscribe to Our Newsletter and stay informed

Keep yourself updated with the latest technology and trends with TechPout.