How to fix phone charger port
- Try out a different power source. The problem with your phone not charging might not be due to your phone or charger but the power outlet the charge is connected ...
- Switch off your phone. Sometimes, your phone is actually receiving power from your charger and your wall adapter is working well, but there's a glitch with your phone software acknowledging ...
- Check the cell phone's charging port. We often put our phones in our pockets and other places without a protective pouch that protects the charging port.
Full Answer
How do you fix a cell phone charger port?
- Remove the back cover, SIM card and microSD card
- Remove the battery
- Unscrew the midframe and disconnect various cables and screws
How to clean a dirty phone charging port?
- Make sure you are in a well-lit area. ...
- Power your phone down.
- Shine a light into the charging port to see if you can identify obvious dirt or lint.
- Still shining the light into your charging port as best you can, take a toothpick and insert it into the charging port. ...
- Gently scrape the walls of the charging port to dislodge dirt and lint.
Why is my charging port not working?
- Drain the battery completely. This means using your device until it powers down by its own and the battery level reads 0%.
- Charge the phone until it reaches 100%. ...
- After the elapsed time, unplug your device.
- Restart the device.
- Use your phone until it completely runs out of power again.
- Repeat steps 1-5.
How do you recharge a cell phone?
To calibrate your phone’s battery:
- Run your battery down until the phone turns itself off (without charging in between)
- Charge your phone to 100% while the phone is off
- At 100%, unplug from charger and power on your phone
- If after powering on the battery isn’t 100%, charge it to 100% and unplug
- Done! The full discharge and recharge cycle has recalibrated the battery’s reading
Can the charging port on a phone be fixed?
Fixing a charging port on your own can be challenging But you can trust the technicians at Phone Clinic to ensure that your iPhone or Android mobile phone is fixed correctly the first time.
How do you fix your phone when the charger port is broken?
0:004:18Charger port not working? This tip could help! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimple little tip that might actually get your phone back up and running let's go. And what is thatMoreSimple little tip that might actually get your phone back up and running let's go. And what is that tip it involves. These yes toothpicks we're going to use toothpicks.
How much does it cost to fix a phone charging port?
Expect to pay between $2 and $30 for a new charging port, depending on the model and whether you buy a standalone charging port or a flex cable/assembly (more on that below). Toolkits start at $5 if you don't already have the tools you need.
How do you fix a phone charger port at home?
3:015:57HOW TO FIX ANDROID PHONE Loose CHARGING PORT At HOME ...YouTubeStart of suggested clipEnd of suggested clipAs you see now it's tight. It's not a loose port. Next we're going to clean this port using someMoreAs you see now it's tight. It's not a loose port. Next we're going to clean this port using some isopropan alcohol and a brush because there is lot of dust.
Can I use a wireless charger if my charging port is broken?
A wireless charger will absolutely help unless it has nothing to do with the charging port located on the phone. Wireless charging will resolve the problem but charging might be slower with it.
How can I fix the charging port on my Android phone?
4:217:10HOW TO FIX ANDROID PHONE CHARGING PORT - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour own phone after years of charge this thing it really loose like these loose. So what you can doMoreYour own phone after years of charge this thing it really loose like these loose. So what you can do you can use this kind of plier. And little if pressure it. So that this charging port become tight.
How do I know if my charger port is damaged?
Signs Your Phone's Charging Port is Damaged or BrokenBroken Pins in Phone Charger Port. Similarly, if pins inside the port become broken or bent, correct charging will become impossible. ... Debris in Phone Charger Port. ... Charger Cable and Adapter Work With Other Devices. ... Faulty Phone Charger Adapter. ... Defective Phone Battery.
Can a Verizon store fix my charging port?
Re: Will the verizon store fix a bad charging port? The stores don't do repairs.
Why won't my iPhone charge?
Most likely, the reason your iPhone won’t charge is due to one of four things: Your iPhone’s Software is Preventing Your Phone From Charging. The Charger Cable/Lightning Cable is Damaged. The Wall Adapter is Damaged. The Charging Port at the bottom of your iPhone is Damaged or Has Something Blocking the Connection.
How to fix a black screen on a phone?
So you’ll need to force reset/hard reset your phone to test this method. Try a hard reset by holding both the on/off button and the home button for up to 30 seconds. Eventually, your phone will restart, resulting in the screen first turning black, then the Apple logo will appear on the screen. When the Apple logo appears, you can stop holding both buttons and allow the phone to restart. Once the phone fully reboots, try plugging the phone into your charger. Hopefully, this easy solution solved your problem. If not, you’ll want to check off the next possible solution. Image credit
Can you use a toothbrush to clean a charging port?
You can try using a new , unused toothbrush to brush away any visible debris gently. You can also use a cue tip, which is very gentle and non-invasive. We strongly recommend against using items such as toothpicks and paperclips, as they can potentially damage the charging port.
How to clean a phone charging port?
If you find visible dirt and debris, get a soft toothbrush and use it to clean the phone charging port. You can also use a cue tip to do this. Avoid using things like toothpicks or paper clips. A toothpick can easily get broken into your charging port and even damage your charging port.
What to do if your phone is charging from a USB port?
If you were charging using a USB port on your computer, switch to another port or try charging directly from a wall adapter. If your cell phone starts charging, then you've found the problem. You just need to call an electrician to fix the faulty wall adapter, buy a new extension box or get your computer USB port fixed.
Why is my phone not charging when plugged in?
Charging cables are often the most common cause of your phone not charging when plugged in . Charging cables go through a lot of wrapping and unwrapping, twisting and untwisting especially when they are being transported on a regular basis as some of us can't do without taking our chargers everywhere with us. These can lead to the charging cable getting damaged. Change your charging cable to another and see if your cell phone charges, if it does then your charging cable was faulty.
Charging Port Problems
Charging ports are easy to damage. Constant connecting and removal of the connector cord can be hard on the port and move, bend, or damage internal components. Sometimes a dropped phone can also cause charging issues.
Troubleshooting Charging Port Problems
The charging port can be dirty or dusty, blocking the connection. Try using a can of compressed air to remove debris from inside the port. If this does not help, it might need further cleaning. Turn off the device, remove the battery and use a small amount of rubbing alcohol or contact cleaner to clean inside the port very carefully.
Repairing Your Charging Port
If you have tried cleaning and routine troubleshooting, but you are still having problems with the charging port, let us evaluate the problem with a free diagnosis. Bring the device to a local Cell Phone Repair store or use our convenient mail-in service.
Common Phone Problems & Repairs
A damaged charging port is one of the most common problems for phones and any other electronic devices. Smartphones usually suffer most because they need to be recharged very often.
Fast Cell Phone Repair Orange County
As this issue is very common, you may not need to seek the help of a phone charging ports repair service. Here are a few things you can try to fix the problem yourself:
How to replace a cracked Samsung phone screen?
On older models like the Samsung Galaxy S1 through S5, Galaxy J1 through J3 and Galaxy Note 1 through Note 4, you’ll generally need to do the following to access the charging port: Remove the back cover, SIM card and microSD card. Remove the battery.
How to remove lint from Samsung phone?
Follow these steps to remove lint and repair the USB charging port on your Samsung phone. Insert a small needle into the charging port and slowly, gently swipe it through the space between the contacts and the USB port walls. As you swipe, gently pull the needle toward you and out of the port to remove lint.
Can you replace a charging port with soldering?
On newer models, the charging port is sold either as a standalone part or as part of a flex cable (also known as an assembly or, in some cases, a daughterboard). Though it’s possible to replace the standalone charging port with soldering, it’s typically easier to replace the entire flex cable. Doing so will also ensure the charging port is ...
Why is the charging port so delicate?
The charging port is very delicate because of the construction of electrical pins. Hence, roughly inserting the charging cable or exposure to liquid can result in a faulty port. So how to charge a phone with a broken charger port? You can certainly fix the port without having to pay a dime on it.
How to check if a phone is charging?
You can check if the phone is charging, by taking the wires off the phone in an interval of two minutes. So, first, keep the phone on a surface with its face down. Then slide the battery into its compartment but not all the way in so that the terminals stay exposed.
How to connect a battery to a negative terminal?
Place the wires on the terminals. For black (Negative), clamp the knot of the wire onto the negative terminal of the battery. And, for the red (Positive), put the knot of the wire, on the positive terminal. Be careful of maintaining a distance between the two wires as you clamp them.
How to cut a rubber cable?
As you know, the rubber case is to protect the wire inside, it has a hard coating. Take knife or use scissors or even fingernails to cut the rubber case. Cut only one end of the cable which is used for plugging into the phone.
What to do if you don't have a plier?
If you do not have a plier, then use a knife with smooth edges or scissors. A tool to take off the sealed covered of the phone to take out the battery . You would not need any tool if you have a removable battery smartphone. Diligence and precaution.
Why is my charging port hard to move?
Charging ports, unfortunately, are easy to damage due to the constant connecting and removal of the connector cord. This constant movement, over time, can be hard on the port, often moving, bend, and in a worst-case scenario, damaging the internal components and the charging port itself.
How long does it take to repair a phone?
In most cases, the entire repair will take up to two hours.
Why does my phone need to be replaced?
Depending on the phone, the mainboard of the device may need to be replaced due to the charging port being connected to it . If this were the case, you may be better off taking the repair money and investing in a newer phone.
Can a phone be replaced by a third party?
As long as your phone is outside of its warranty, most third-party shops, even if they use third-party parts, will do just as good of a job, if not better in terms of customer service and turnaround time. Depending on the phone, the mainboard of the device may need to be replaced due to the charging port being connected to it.
Loose Phone Charger Port
If you have to hold your phone at a particular angle for it to charge correctly, it may be that the port has come loose. This will need to be repaired sooner rather than later as continued use in this condition will likely cause further damage.
Broken Pins in Phone Charger Port
Similarly, if pins inside the port become broken or bent, correct charging will become impossible. This problem is more difficult to diagnose as the phone will have to be disassembled before you can determine the issue.
Debris in Phone Charger Port
Debris inside the charger port will also affect efficiency. To check if debris is compromising your charging port, shine a light to see if there is any visible dirt. If there is, you can carefully use a paper clip to dislodge the dirt. We recommend for iPhone users, an apple lightning charger cable for high durability.
Charger Cable and Adapter Work With Other Devices
If your usual charging cable and adapter works fine when used on another compatible device, it is fairly likely that your phone’s charging port is faulty or evidence there is a wider issue with the device.
Faulty Phone Charging Cable
A damaged USB charging cable is one of the most common reasons behind charging issues as they are flimsy and often get carried around with us, leading to lots of opportunities for stress. Experiment with a brand new cable to see if a broken one was causing your charging problems.
Faulty Phone Charger Adapter
Many modern phone chargers come in the form of a cable with a USB and an adapter that the USB is plugged into. If you’ve established that the cable is working fine, then check your adapter in a similar fashion.
Defective Phone Battery
If you have an older phone, charging issues may arise as your battery ages and loses its ability to charge fully.
