how to repair a cracked concrete fountain

How to Repair a Cement Fountain.

• 1. Turn the fountain water pump off. Dip out any standing water in the fountain bowl with a cup.
• 2. Dry the fountain with a towel. Allow at least 24 hours for the water to dissipate from the concrete.
• 3. Clean the repair areas with a wire brush to remove any small particles of concrete that have broken. Use the brush to clean larger pieces that have ...
• 4. Brush the areas you cleaned with a wire brush with a stiff-bristle paintbrush to remove concrete dust from the areas for good adherence.
• 5. Squirt both tubes of concrete epoxy onto a paper plate. One of the tubes contains a bonding agent and the other is a hardener.

Full Answer

How to repair a crack and leak in a fountain?

How to Repair a Crack and Leak in a Fountain

• Examination and Cleaning. Examine the fountain carefully to determine if it is a fiberglass, resin-cast fountain, plastic or concrete.
• Plastic, Fiberglass or Resin Fountains. Pour the resin or liquid plastic material into one cup, and pour the catalyst into another as the amounts needed for the repair job.
• Concrete Fountains. ...

How to repair a resin fountain?

How to Repair a Resin Fountain Wash and dry the fountain thoroughly. Create a paint color to match that of the fountain or get as close as you can. Mix the casting resin in a disposable container according to the manufacturer's instructions. Use the resin to repair cracks and fill holes in the fountain.

How to repair a crack in a concrete pond?

* My Remaining Steps with Installing Electrical:

• Trench to a location near the pond.
• Pull Wire over.
• Install a Waterproof GFCI.
• Add a breaker back at my breaker panel.

How to concrete the bottom of a fountain?

What is the best paint for concrete?

• Best overall: Rust-Oleum Decorative Concrete Coating.
• Best for your budget: Kilz Decorative Concrete Coating.
• Most weather resistant: In The Swim Patio And Deck.
• Best for your driveway: Rust-Oleum EpoxyShield Professional Floor Coating Kit.
• Best for your porch: INSL-X Sure Step.

How do you seal a leaking concrete fountain?

Concrete must be clean and free of previous sealers and paints. The birdbath and fountain must be completely dry before sealing. Fill in any cracks with a concrete crack filler where water may be leaking through. Use a penetrating concrete sealer or durable concrete coating to seal the birdbath and fountain.

How do you fix a crumbling fountain?

Step 1: Clean the Fountain. Turn off the fountain and drain the water basin completely. ... Step 2: Determine the Extent of the Damage. ... Step 3: Use Epoxy for Broken Stone. ... Step 4: Fill Small Cracks With Cement. ... Step 5: Use Cement for Larger Holes. ... Step 6: Seal the Fountain. ... Step 7: Restart the Fountain.

What do you use to seal a concrete fountain?

SANI-TRED® is a liquid rubber waterproof coating that will seal your concrete fountain with superior protection. SANI-TRED® adheres to concrete, getting into the pores and bonding on a molecular level, leaving you with a concrete fountain that is completely and permanently waterproof.

How do you fix an outdoor fountain?

1:046:52How to repair a water fountains low flow - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat I need to do is take that scraper right there and scrape this bottom surface and scrape thisMoreWhat I need to do is take that scraper right there and scrape this bottom surface and scrape this top clean. I should should go get a new hose for that it's only a couple bucks.

Can you repair a cracked fountain?

The exact material used to repair a cracked fountain depends on what it is made of -- epoxy-based patching materials usually work best for concrete fountains, while metal or fiberglass fountains can be repaired with waterproof silicone or similar fillers.

How do you fix concrete in water?

0:282:18How to Stop Leaks in Concrete Walls - YouTubeYouTubeStart of suggested clipEnd of suggested clipWater stop can permanently stop an active water leak in as little as 3 to 5 minutes proper crackMoreWater stop can permanently stop an active water leak in as little as 3 to 5 minutes proper crack preparation is essential to achieving a successful repair. Using a masonry chisel.

How do you restore an old concrete fountain?

0:162:41Concrete Fountain Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipConcrete is a porous material. The bonding agent will enhance the bonding strength of the repair byMoreConcrete is a porous material. The bonding agent will enhance the bonding strength of the repair by penetrating the pores in the concrete.

Can I use flex seal in a fountain?

We partnered with the Flex Seal® Family of Products to create a DIY relaxing tabletop fountain! Let's face it…we can all use a little zen in our lives! Summer is in full swing and it's the perfect time to get crafty with family and friends!

How do you refinish a concrete fountain?

Coat the fountain with concrete sealer. Apply it with a paintbrush to get into all the small decorative areas. ... Apply a primer. Use a new paintbrush to apply a paint primer. ... Paint the fountain using an oil-based paint. The oil-based paint will help protect the fountain from water damage.

How long do concrete fountains last?

And even if it is covered, they aren't likely to last more than probably 5-8 years, as over time tarps or covers tend to get holes or sweat on the underside – and those droplets of moisture start the damage process as it infiltrates the stone and freezes over winter.)

What do you do with a broken fountain?

How to Repurpose Your Fountain and Save WaterRepurpose your fountain as a flowerbed. ... Reuse a patio fountain as an herb garden. ... Transform your fountain into a centerpiece. ... Turn your fountain into garden art. ... Repurpose your fountain into a cold beverage bin for parties.More items...•

What kind of paint do you use on a concrete fountain?

Concrete water fountains can be painted with an exterior latex or oil-based paint. You can also use a concrete stain. If you go with a stain, you need to remove the old paint and sealer with a concrete and masonry paint stripper.

Concrete Fountain Repair - YouTube

Repair a Leaking Concrete Fountain » The Money Pit

Can you repair a broken concrete fountain?

Cement fountains generally last many years before developing small cracks, crumbles or figurines that release from the base. Cement repair is easily accomplished by the do -it-yourself homeowner in short time and with little expense.

Can you glue concrete back together?

Do not try to use concrete to glue the pieces back together – it won’t work, so don’t waste your time. Once you have the epoxy glue correctly mixed, simply apply it to the damaged areas, clamping them together until the glue is completely dry.

How do you seal a leaking fountain?

Apply a coating of concrete sealer onto the entire cement fountain on the outside and inside, using a paintbrush. The sealer repels ultraviolet rays from the sun and seals the surfaces so it does not absorb water and results in cracks or breaks.

Do I need to seal concrete fountain?

Birdbaths and fountains are frequently constructed out of concrete and should be treated with a concrete sealer in order to presevere their life, prevent cracking, water penetration and organic growth such as mold and mildew.

How do you waterproof a concrete fountain?

After you’ve painted the surface of the fountain, any clear waterproof coating will work to waterproof the fountain. If you have a concrete fountain, look for a sealant like a concrete and masonry sealer that will provide protection against harsh weather.

How do you reattach a broken concrete?

Spread a heavy layer of Loctite Metal And Concrete Epoxy on the surfaces to be joined and press the broken piece into position, leaning a heavy block against the repair until the epoxy sets. Leave undisturbed for 24 hours.

What glue will stick to concrete?

SAKRETE Concrete Glue is a liquid latex bonding adhesive for bonding new concrete, mortar or gypsum plaster to existing surfaces. Ready to use and easy to apply, it eliminates the need for roughing or scoring old surfaces.

How to keep algae out of cement fountain?

Add water clarifiers to keep algae from forming in your cement fountain. Seal pond and pool cement fountains in the same manner after draining water to a level of 6 inches or more below the areas of repair. Mary Lougee has been writing for over 10 years.

How long does a cement fountain last?

Cement fountains generally last many years before developing small cracks, crumbles or figurines that release from the base. Cement repair is easily accomplished by the do-it-yourself homeowner in short time and with little expense. After the repairs are made, you can re-seal your entire fountain with a clear sealant or paint it to create ...

How to hold a fountain in place?

Place the loose end of a roll of duct tape on the center of the figurine and wrap the tape tightly around the fountain to hold it in place . Make at least one revolution of duct tape around the entire fountain and figurine.

How to attach a figurine to a fountain?

Apply a generous amount of epoxy on the attachment areas of a figurine and the area that it fits on the fountain. Hold the figurine in place with one hand. Place the loose end of a roll of duct tape on the center of the figurine and wrap the tape tightly around the fountain to hold it in place. Make at least one revolution of duct tape around the entire fountain and figurine.

How to fill cracks in a fountain?

Force the epoxy to the cracks. This way, you will fill the cracks to the surface level. Then using a plastic trowel, level up the surface. Using enough quantity of epoxy, apply it on the figur ine and areas fitting on the fountain. Using one hand, hold the figurine in place.

How to make a fountain with epoxy?

Using one hand, hold the figurine in place. Then place one end, the loose one, on the center of the figurine and wrap it around the fountain. You should make at least one such revolution. Allow the epoxy to dry for a whole day. After drying, remove the tape.

How long should cement sealant dry before turning on water pump?

The sealant should be allowed to dry for a whole day before you decide to turn on the fountain water pump. With the above steps in mind, you are good to go in as far as repairing your broken cement fountain is concerned.

Can you fix a cement fountain in Orange County?

It is easy to do the cement repairs, but sometimes you need a professional to ensure that you completely fix the problem.

How to make a resin repair?

1. Pour the resin or liquid plastic material into one cup, and pour the catalyst into another as the amounts needed for the repair job. Only create small batches at a time, as once you combine the resin or plastic with the catalyst, you must work quickly to avoid the material hardening in the cup.

What to wear to avoid concrete dust?

Wear goggles and a dust mask to avoid getting concrete dust in your eyes and lungs. Writer Bio. As a native Californian, artist, journalist and published author, Laurie Brenner began writing professionally in 1975. She has written for newspapers, magazines, online publications and sites.

Can you use epoxy to fill cracks in concrete?

If you are using an epoxy sealant, mix only the amount needed to completely fill the crack, otherwise it will harden and go to waste. For cracks that go all the way through concrete, use an two-part injection product that requires mixing as in Step 1 and 2 of the previous section.

Can you use caulk to fill cracks?

Verify the material fills up the crack fully. Some liquid crack fillers can be applied using a caulking gun, while others may be applied directly from the bottle.

Can you use epoxy to repair a concrete fountain?

For example, you can use a concrete patch or epoxy material to repair a concrete fountain, but for a resin, fiberglass or plastic fountain, you'll need a liquid plastic or resin-type sealant to make the repair.

Step 1 Prepare

The first thing you would do for pond and concrete fountain repair is to prepare the substrate. Meaning remove any loose crumbly substrate, make sure the substrate is clean, dry, free of any previous applied products, and foreign matter.

Step 2 Prime

Prime the substrate with PermaFlex (240 sq ft per gal). Cement block surfaces need 2 prime coats of PermaFlex. Shown using Light Grey.

Step 3 Patch

Patch and profile any joints, seams, cracks, holes and rough areas using LRB/TAV mixture (Liquid Rubber Base, Thickening Activator). 2-parts LRB is mixed with 1-part TAV. LRB can be used by itself (as a liquid membrane) to smooth out a rough floor.

What is a concrete fountain?

A concrete fountain is a water feature that can do a lot for the look and atmosphere of your backyard, but that doesn’t mean they’re always perfect. Sometimes, even the best looking fountains can have cracks that affect water flow.

Can a broken fountain be repaired?

A cracked and broken fountain does no good for anyone, so it’s a good idea to repair, waterproof, and protect your fountain with a concrete leak sealer to keep it working its best.