how to repair a cracked fountain

How to Repair Cracks in Outside Water Fountains

• 1.. Turn off the fountain's pump and drain all the water from the fountain. Leave the fountain to sit empty for about a...
• 2.. Identify all the cracks that need repair. Small cracks may not be visible when the fountain is wet, but once it has...
• 3.. Clean the cracks with a stiff-bristled brush to remove dirt and debris that...

Full Answer

How do you fix a cracked concrete fountain?

Concrete Fountains 1 Put on your safety gear after cleaning the inside of the fountain. ... 2 Apply a primer coat to the inside of the fountain for large fountains or ponds. You can skip this step on smaller fountains or ponds. 3 Let the primer dry before applying a liquid or caulk-like crack filler to all cracks. ... More items...

Can You widen cracks in a fountain?

Only widen cracks that won't affect the structure of the fountain. For example, on round fountains with a crack that runs along the perimeter, do not widen the crack or you could cause the fountain to break. On these types of cracks, sand the surface with sandpaper.

How do you fix a chipped water fountain?

If your fountain is made of either stone or fiberglass, you can fix this with clear silicone like the kind used to repair cracks in an aquarium. If you find a chip in your stone water fountain, this can be easily patched using a mixture of mortar or quick drying concrete or cement.

How can I tell if my fountain has cracks?

Small cracks may not be visible when the fountain is wet, but once it has dried they will be easier to locate. If the fountain is made of concrete, small cracks will appear white once dry.

How do you repair a cracked resin fountain?

1:202:46How to Repair a Resin Fountain - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhen making repairs use the resin as a glue holding the pieces in place until the epoxy sets up fillMoreWhen making repairs use the resin as a glue holding the pieces in place until the epoxy sets up fill holes by spreading resin into them and then smoothing away excess resin mix the epoxy putty.

How do I fix my water fountain?

0:194:49Tips & tricks | Fountain Repair with Glue, Epoxy Putty and PaintYouTubeStart of suggested clipEnd of suggested clipSome repairs can be easily done with silicone. While others may require some glues and some epoxiesMoreSome repairs can be easily done with silicone. While others may require some glues and some epoxies that will bring your item back to life for this repair we're going to be using some glues.

How do you fix a crack in a ceramic fountain?

0:076:34HOW TO FIX A CERAMIC WATER FOUNTAIN WITH POLYMER CLAYYouTubeStart of suggested clipEnd of suggested clipWe will apply the polymer clay to the broken openings paint it and restore the fountain to itsMoreWe will apply the polymer clay to the broken openings paint it and restore the fountain to its original.

How do you fix a leak in a plastic fountain?

Silicone Sealant or Caulk Silicone sealant is a clear gel in a tube with a consistency similar to a gel toothpaste, only far stickier. Repair a leak in resin by applying a thin layer of silicone directly over the leaky area on a dry fountain; or better yet, on both the inside and outside areas of the fountain.

What is the best paint for a concrete fountain?

Concrete water fountains can be painted with an exterior latex or oil-based paint. You can also use a concrete stain. If you go with a stain, you need to remove the old paint and sealer with a concrete and masonry paint stripper.

Should I seal concrete fountain?

Birdbaths and fountains are frequently constructed out of concrete and should be treated with a concrete sealer in order to presevere their life, prevent cracking, water penetration and organic growth such as mold and mildew.

How do you fix an outdoor fountain?

1:046:52How to repair a water fountains low flow - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat I need to do is take that scraper right there and scrape this bottom surface and scrape thisMoreWhat I need to do is take that scraper right there and scrape this bottom surface and scrape this top clean. I should should go get a new hose for that it's only a couple bucks.

How long do concrete fountains last?

And even if it is covered, they aren't likely to last more than probably 5-8 years, as over time tarps or covers tend to get holes or sweat on the underside – and those droplets of moisture start the damage process as it infiltrates the stone and freezes over winter.)

Why has my water fountain stopped working?

Check the fountain pump's impeller by placing a hand on top of the running pump. If you feel a mechanical piece whirring inside, the impeller is working. If this piece isn't working, it's likely jammed with debris. Run water backward through the pump to remove any blockages in the impeller.

Why does fountain pump stopped working?

Your pump can't push water if it doesn't have access to it. First, check to see if there is anything keeping water from getting to the pump, be it a large rock or debris, leaves, a clogged skimmer net or opening, a jammed skimmer flap, or just a skimmer mat that has gone too long between cleanings.

Why is my waterfall not working?

If it is within one foot of the water level then something is wrong. Check for anything that would obstruct water flow. Winterizing plugs are one obvious possibility, though too much debris blocking the inlets or in the pump strainer basket could easily do it as well. It's definitely within a foot.

How do you fix an outdoor fountain pump?

0:0016:06How to fix and replace a water fountain pump (a Tetra pump)YouTubeStart of suggested clipEnd of suggested clipRight here it's a little black plug. That goes in the hole on top here that goes in here I made aMoreRight here it's a little black plug. That goes in the hole on top here that goes in here I made a little extra length of hose and got a second adapter but yours will be basically the same here.

What is the best material to repair a cracked fountain?

The exact material used to repair a cracked fountain depends on what it is made of -- epoxy-based patching materials usually work best for concrete fountains, while metal or fiberglass fountains can be repaired with waterproof silicone or similar fillers.

Can you see cracks in a fountain when it is wet?

Small cracks may not be visible when the fountain is wet, but once it has dried they will be easier to locate. If the fountain is made of concrete, small cracks will appear white once dry. Get the Best Mortgage Rate for You | SmartAsset.com. Loading.

Can a crack in a fountain be repaired?

Outdoor water fountains come in various shapes, sizes and materials so you can tailor them to your yard or garden. Over time, the weather and other forces can cause these fountains to chip or crack. Most cracks in fountains can be repaired, provided you catch them before they become serious.

Why is my water fountain leaking?

A leak in your water fountain is also a bad because it wastes water and requires that it be replaced. Check the fountain over and see if you can locate the leak. If you can't see it, let the water sit for about seven days. Any cracks will show up as a white area on the base.

Why is my water fountain worthless?

Without a working water pump, your outdoor water fountains will be worthless because no water can be pushed through the system. If your water pump stops working or runs slowly, the filter probably needs to be cleaned.

What is the best material to use for a water fountain?

Resin and fiberglass cloth. Water proof sealant. Mortar, quick drying concrete or cement. Outdoor water fountains are a beautiful and artistic addition to your yard. You want them to maintain their beauty, and be in good repair. Therefore, maintenance and repair are important factors to consider for your water fountain.

Can you repair a broken water fountain?

If your outdoor water fountains are made of a resin material, you can still repair a crack or broken part fairly easily. All you have to do is use a mixture of resin and fiberglass cloth like you can find in a boat supply store.

How to repair cracks in cement?

Repair small cracks and chips in the cement by filling the areas with a quick-setting anchoring cement. Mix the cement to a pastelike consistency and completely fill the cracks and chips with the cement using a small garden trowel. Allow the cement to set for 15 minutes.

How to repair broken stone?

Repair broken stone using a quick patch epoxy. Quick patch epoxy is a two-part adhesive that when mixed forms a quick-binding material that immediately binds the stone pieces and cures in 24 hours. Mix the epoxy and spread a layer on both pieces of the broken stone using a putty knife. Firmly place the stone pieces together and hold for at least two minutes to allow the pieces to set. Wipe away excess epoxy on the surface of the fountain using a cloth. Allow the epoxy to cure.

How long does a cement fountain last?

A cement fountain is made to last for decades with proper maintenance, but even the best maintained fountains can develop issues that require repair. There are two main areas of repair with a cement fountain: the pump and the stone.

How to repair pitted surface?

Repair larger holes or restore a pitted surface using the quick set cement. Mix the cement and fill the holes with it, shaping the top of the patch. To smooth the patch's surface, mix a second, smaller batch of cement to the consistency of paint, and apply a layer of the thinned mix to the surface of the patch using a paint brush.

Can you fix a fountain yourself?

Most issues short of replacement of the fountain you can fix yourself, and due to the robust nature of the materials used to create the fountain, these fixes are generally inexpensive and quick, accomplished with supplies found at any home improvement store. Advertisement.

Can you repair a broken concrete fountain?

Cement fountains generally last many years before developing small cracks, crumbles or figurines that release from the base. Cement repair is easily accomplished by the do -it-yourself homeowner in short time and with little expense.

Can you glue concrete back together?

Do not try to use concrete to glue the pieces back together – it won’t work, so don’t waste your time. Once you have the epoxy glue correctly mixed, simply apply it to the damaged areas, clamping them together until the glue is completely dry.

How do you seal a leaking fountain?

Apply a coating of concrete sealer onto the entire cement fountain on the outside and inside, using a paintbrush. The sealer repels ultraviolet rays from the sun and seals the surfaces so it does not absorb water and results in cracks or breaks.

Do I need to seal concrete fountain?

Birdbaths and fountains are frequently constructed out of concrete and should be treated with a concrete sealer in order to presevere their life, prevent cracking, water penetration and organic growth such as mold and mildew.

How do you waterproof a concrete fountain?

After you’ve painted the surface of the fountain, any clear waterproof coating will work to waterproof the fountain. If you have a concrete fountain, look for a sealant like a concrete and masonry sealer that will provide protection against harsh weather.

How do you reattach a broken concrete?

Spread a heavy layer of Loctite Metal And Concrete Epoxy on the surfaces to be joined and press the broken piece into position, leaning a heavy block against the repair until the epoxy sets. Leave undisturbed for 24 hours.

What glue will stick to concrete?

SAKRETE Concrete Glue is a liquid latex bonding adhesive for bonding new concrete, mortar or gypsum plaster to existing surfaces. Ready to use and easy to apply, it eliminates the need for roughing or scoring old surfaces.