Repairing Guides

how to repair a deep scratch on a plastic bumper

by Yasmeen Hand Published 3 years ago Updated 2 years ago
image

  1. Apply Masking Tape Apply masking tape to adjacent panels and plastic trim that could be accidentally sprayed by bumper paint.
  2. Sand Bumper Wrap a sheet of coarse sandpaper around your scuff pad, and sand the bumper with firm pressure until you have smoothed the scratches out.
  3. Clean Panel Once you are done sanding wipe down the panel with your cleaning towel, then clean the entire panel with wax and grease-remover.
  4. Fill Scratches Now if you find any scratches that will not sand out, fill them in with a thin layer of scratch-filling putty. ...
  5. Scuff Repair Area Take your scuff pad and scuff at least ten inches all around the repair area. ...
  6. Prime Bumper Cover any areas that might be hit with unwanted overspray with newspaper or butcher paper. ...
  7. Paint Bumper Using the fine-grit sandpaper, sand the primer with light pressure until it feels smooth. ...
  8. Clearcoat Layer

Part of a video titled How to repair a scratch in a plastic bumper.#diy auto body ...
0:12
14:15
This I've got some 180 grit sandpaper on a little block here. And we're gonna sand this and get itMoreThis I've got some 180 grit sandpaper on a little block here. And we're gonna sand this and get it prepped out to put a little bit of a glaze putty in here to fill these crevices that are in here.

How much does it cost to repair a plastic bumper?

When these are summed up, it will merely show why it involves so much to fix a plastic bumper. Labor – It costs about $200-$300 at $100 per hour with a duration of about 2 – 3 hours. Painting – It costs about $300-$400 at $100 per hour with a duration of about 3 – 4 hours.

How do you repair a scratched bumper?

  • Factory-matched paint in a spray can
  • Automotive spray primer
  • Automotive spray clear coat
  • Some sheets of coarse and fine sandpaper
  • Scuff pad
  • Cleaning towel
  • Wax and grease remover
  • Scratch-filling putty

How to fix a cracked plastic bumper?

you are correct, take a 40watt soldering iron and have at it, I've fixed many a broken bumper this way, its just plastic welding, first melt the cracked area together with a fine tip, making sure you get good penetration so the material on either side bonds together, then either shave some material from the bottom or somewhere inconspicuous and use them as a filler rod. harbor freight also sells filler rod and a plastic welder, though i have heard mixed results about it

Can a scratched bumper be repaired?

Yes, we can absolutely help with repairing bumper cracks as well as scuffs and scrapes. Fixing cracks in the bumper is imperative since a cracked bumper can’t necessarily absorb force as well as an undamaged bumper can. We can help you with any crack your bumper may have, whether that is a small hairline fracture or a larger area of damage.

image

How do you get deep scratches out of a plastic bumper?

Answer provided byStep 1: Lightly rub the scratched area with 3,000 grit sandpaper. ... Step 2: Wipe down the surface with a microfiber cloth to get rid of any particles or debris.Step 3: Apply a polishing compound to the buffed area via another microfiber cloth.More items...

How do you fix deep gouges in plastic?

STEP 1: Scrutinize the scratches. The depth of a scratch dictates how to remove it. ... STEP 2: Get it squeaky clean. ... STEP 3: First buff using a mild abrasive, like toothpaste or baking soda. ... STEP 4: Wet sand for deeper scratches. ... STEP 5: Go for a finer grit. ... STEP 6: Polish to renew sheen.

How do you repair a gouged plastic bumper?

1:3415:493M Plastic Bumper Cosmetic Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll we're really trying to do is just knock down this cliff edge on the edges of the gouges. AndMoreAll we're really trying to do is just knock down this cliff edge on the edges of the gouges. And also if you no doubt know anytime you contact plastic with a high-speed tool you melt the plastic.

How much does it cost to fix a deep scratch on a bumper?

Cash Cars Buyer reports the average costs to be between $325 and $425. Light scratches are typically quick fixes while deep scratches may result in severe paint chips that reveal the metal or plastic of the bumper. Cash Cars Buyer lists the range of scratch repairs as $50 to $600.

Does scratch doctor work on plastic?

Scratch Doctor® was formulated to remove surface scratches from painted metal surfaces. We have seen it work wonders on plastic surfaces as well, but we always recommend that you test it in an inconspicuous area before applying anything the first time to a large area.

How do you get scratches out of plastic car exterior?

Apply a mild abrasive, such as toothpaste, furniture polish, baking soda or plastic polish to the scratch. Try our VuPlex Plastic Cleaning Kit which will also give your surface a gloss finish. Wipe a clean cloth over the paste you have added in a circular motion.

How to remove scratches from bumper paint?

Step 1. Apply Masking Tape. Apply masking tape to adjacent panels and plastic trim that could be accidentally sprayed by bumper paint. Step 2. Sand Bumper. Wrap a sheet of coarse sandpaper around your scuff pad, and sand the bumper with firm pressure until you have smoothed the scratches out. Step 3. Clean Panel.

How long to sand a jar of paint?

Shake the jar of paint for about thirty seconds, then apply multiple coats of paint, about 10-12 inches away. If you encounter any bumps, cloudiness, or "cat" scratches, just wait five minutes, sand again until smooth, and try again.

How to get scratches out of a sandpaper?

Wet your 3,000-grit sandpaper and gently sand the scratch out. Do this until the scratch is no longer visible. Alternatively, you can use toothpaste to buff out this type of scratch. It works just like a 3,000-grit sandpaper, but polishes the affected surface as well. 2.

How long does it take for a sealer to dry?

First, you’ll need to do a wet coat of flexible part sealer and allow it to dry for 30 minutes. After this, apply primer and paint over the part sealer. Usually, two coats of two-part primer surfaces should work. Dry sand the restored surface with 400-grit paper once hardened.

Can you fix scratches on your car bumper?

Getting scratches out of your car bumper can be costly if you get it done at an auto body shop. But if the scratches aren’t too bad, you can opt to fix this issue on your own . Keep in mind, however, that you’ll need to follow the right process to get good results. Light scratches can usually be treated with car scratch remover kits.

Can you buff out scratches on metal?

These are typically the kind of scratches that are deep enough to reach the metal panel, so attempting to buff them out won’t work. You’ll have to fill in the scratches before painting them over and polishing them to your desired finish.

Can you remove scratches from a car?

Light scratches can usually be treated with car scratch remover kits. However, deep scratches and scuffs that go past the clear coat are better addressed with a more extensive procedure that will resto re not only the color, but also the contour. Light scratches can usually be treated with car scratch remover kits .

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9