Fixing a Dripping Delta Single Handle Kitchen Faucet
- SHUT OFF THE COLD AND HOT WATER VALVES UNDER THE SINK. ...
- REMOVE THE BUTTON AND SCREW THAT HOLDS THE HANDLE IN PLACE. ...
- REMOVE THE CAP. After removing the handle, you can proceed to remove the cap. ...
- USE THE WRENCH TO REMOVE THE CARTRIDGE RETAINING RING. An adjustable wrench is the perfect tool to complete this step. ...
- REMOVE THE OLD CARTRIDGE AND INSTALL THE NEW ONE. The faucet’s cartridge is held in place by the retaining ring. ...
- RE-INSTALL THE CARTRIDGE RETAINING RING. With the new faucet cartridge in place, you can start re-assembling the faucet. Start by re-installing the cartridge retaining ring.
- RE-INSTALL CAP, HANDLE, SCREW AND BUTTON. As the title’s suggests, put the faucet’s cap back on and hand tighten it. Re-install the handle. ...
How to stop a dripping Delta kitchen faucet?
Here’s how you can fix a dripping Delta faucet:
- Turn off the waterline, both hot and cold water valves.
- Remove the screw cover using a screwdriver.
- Insert a 1/8-inch (3.2-mm) Allen wrench into the hole to remove the handle.
- Remove the cap and ring, using two wrenches—one holding the bottom and the other turning the top counterclockwise.
- Remove the round metal stem and ball from the faucet.
How to fix a dripping 2 handle Delta kitchen faucet?
What You’ll Need to Repair the Faucet:
- 1/8-inch Allen wrench
- Needle-nose pliers
- Tongue-and-groove pliers
- Screwdriver
- Replacement parts (If you have a lever-handle style product, you need RP61; if you have a knob handle you need RP188.)
Is it hard to repair a drippy Delta Faucet?
Here’s a guide:
- Turn off the main water shutoff valve so that water is cut off from the faucet. ...
- Find the screw connecting the handle to the faucet system. ...
- Use a Phillips screwdriver or an Allen wrench to remove the screw. ...
- Use needle-nose pliers to remove the retaining pin holding the cartridge.
- Use pliers to grip the valve system then pull the cartridge out.
How to stop a leaky faucet in the kitchen?
How to Fix Water Leaks at the Base of the Spout
- Step #1: Identify Your Faucet’s Brand. Before restoring your dripping faucet, identify your sink’s brand and model. ...
- Step #2: Gather Tools and Shut Down Water Supply. ...
- Step #3: Deconstruct the Faucet. ...
- Step #4: Inspect and Replace Damaged Parts. ...
- Step #5: Reassemble the Faucet. ...
- Step #6: Call for Backup if the Problem Continues. ...
Why does my Delta kitchen faucet drip?
Your Delta® faucet is designed for leak-free performance. Through normal use, and depending on the water conditions in your area, the seats and springs experience wear and may need to be replaced occasionally. It is also possible that there is sediment or debris in your faucet.
How do I disassemble a Delta single handle kitchen faucet?
1:078:56Delta Kitchen Faucet Leak Repair (Single Handle) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to removeMoreThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to remove the set screw in the handle. Put the set screw in a parts pole to ensure that you will not lose.
How do you fix a leaky Delta single handle faucet?
0:024:06How To Rebuild A Delta Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce we have the handle took off we're going to need to open our rebuild kit as it has the tool toMoreOnce we have the handle took off we're going to need to open our rebuild kit as it has the tool to loosen that nut on the top of the faucet. The part numbers gonna be at our b-36.
How do I change the O-rings on my Delta kitchen faucet?
1:112:57How to repair a leaky Delta faucet. - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean off all the old grease. Each package comes with two o-rings slide the first one on the secondMoreClean off all the old grease. Each package comes with two o-rings slide the first one on the second one will slide right over the top of the first one.
How do you fix a leaking single handle kitchen faucet?
0:423:11How to Repair a Leaky Single Handle Ball Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You willMoreFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You will need to remove the single lever handle. This may require using an allen wrench to loosen the hammer.
How do you fix a dripping kitchen faucet?
To stop drips at the spout or correct problems with hot and cold mixing, remove the cartridge and either replace the O-rings on the cartridge if they're worn or replace the entire cartridge. Take the cartridge to the home center or hardware store to find a replacement.
How do you take apart a Delta Faucet head?
0:462:21How To Clean a Delta® Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipLikely just that mineral build-up you'll need to remove your spray wand don't worry this is superMoreLikely just that mineral build-up you'll need to remove your spray wand don't worry this is super easy on some faucets you can just remove your spray wand by simply unscrewing it.
How do I know what model Delta Faucet I have?
The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.
How do you disassemble a Delta faucet?
2:4710:00Delta Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext step we're going to be removing the cap assembly. We'll do that by using our adjustable wrenchMoreNext step we're going to be removing the cap assembly. We'll do that by using our adjustable wrench again this is a smooth draw wrench as we're not we don't want to scar the finish of the product.
How do you fix a dripping kitchen faucet with two handles?
0:424:49How to Repair a Leaky Two-Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with aMoreOnce you determine the trouble stem you'll need to turn off the water. Next remove the handle with a Philips head screwdriver. So that the stem is visible.
How do you take apart a Delta Faucet head?
0:462:21How To Clean a Delta® Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipLikely just that mineral build-up you'll need to remove your spray wand don't worry this is superMoreLikely just that mineral build-up you'll need to remove your spray wand don't worry this is super easy on some faucets you can just remove your spray wand by simply unscrewing it.
How do you disassemble a Delta faucet?
2:4710:00Delta Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext step we're going to be removing the cap assembly. We'll do that by using our adjustable wrenchMoreNext step we're going to be removing the cap assembly. We'll do that by using our adjustable wrench again this is a smooth draw wrench as we're not we don't want to scar the finish of the product.
How do you remove a Delta faucet without screws?
You can use an allen wrench (also called an allen key) to remove it. Once you've done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.
How do you unscrew a Delta faucet?
1:032:43How To Uninstall a Bathroom Faucet by Delta - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can lift the old faucet out you can use a putty knife to help break the seal. For single holeMoreYou can lift the old faucet out you can use a putty knife to help break the seal. For single hole mounts as well as three hole mounts with an escutcheon plate. The faucet should come right out.
How to stop a faucet from leaking?
Investigate the cap and adjusting ring by taking a good look. If the faucet seems to be leaking from there, try tightening the adjusting ring with needle-nose pliers. If that doesn’t stop the leak, you’ll need to replace the faucet’s seats and springs.
How long does water run in a faucet?
The water needs to run for one minute. For kitchen & bathroom faucets, be sure to put a bucket upside down over top of the faucet in order to direct the water down to the sink, or water will spray everywhere. Turn the water off at the supply lines again before re-assembling. 8.
Do you need an adjusting ring for a faucet?
Depending on the age of your faucet, you may not have an adjusting ring. For those with newer faucets that don’t contain adjusting rings, please skip this step. If you have an older faucet with an adjusting ring, it will not be needed after the repair if the cam/packing is replaced.
How to remove faucet arm from upright shaft?
Gently remove the faucet arm from the upright shaft by pulling upward on it while rotating it.
How to check for leaks in water valves?
Turn on the water at the valves and check for leaks. Start out with the water on cold and on with about half the maximum pressure. If things look OK with the half pressure then turn the cold water on all the way. Again, check for leaks. Once you're sure things are OK, turn on the hot water. ...
How to remove a swivel aerator?
Step 1: Remove old end, aerator (looks like a cap with a little screen), or previous swivel that broke and part is still there; carefully clean the threads. Step 2: Use one layer of Teflon tape around the outer threads. Converter first, then swivel. Hand tighten to be very snug, and do not wrench.
How to fix Allen wrench that won't remove?
Spray it with PB Blaster and let set, then spray again. Make sure the Allen wrench is secure and turn outwards to the left. If you still can't remove it, then replace it.
How to remove chrome dome?
Remove the chrome-dome by turning counter-clockwise. You may need to use Channel-Lock pliers to get things moving. Set aside.
How to remove a golf ball from a socket?
Gently remove the ball. Please note the orientation of the ball, cut into one side of the ball is a slot that rides on a stud inside the socket.
Where to get replacement water cartridges?
You can get the replacement cartridge from any big box hardware store.
What is a delta faucet?
Delta bathroom and kitchen faucets with two handles often are stem-style faucets that include a neoprene valve seat and spring that fits into the faucet below a cartridge-like insert stem. This is different from a true cartridge-style faucet, which closely resembles a stem faucet but does not have valve seats and springs.
How to tell if a faucet is leaking?
Determine Which Side Is Leaking. Place your hand under the drip from the faucet. If the water is warm, the leak is most likely on the hot side of the faucet. If the water is cold, the leak is most likely on the cold side. This tells you which is the better side to fix first, but it's possible that both sides are leaking in any case.
How to remove valve seat and spring?
Remove the seat and spring by inserting a small screwdriver or Allen wrench into the hole of the seat and pulling up both parts together. Note the spring's orientation inside the valve seat. The spring should be slightly larger in diameter at the bottom than at the top—where it fits into the seat.
How to replace a valve stem?
If desired, you can also replace the O-ring (which is sometimes included with stem-and-spring kits) or the entire stem. Fit the stem into its housing, aligning the tabs on the stem with the slots in the housing. Push the stem all the way down until it stops.
Where is the valve seat on a faucet?
Look inside the stem housing and locate the neoprene valve seat sitting in a hole at the bottom of the faucet housing. The valve seat is a small, black, rubber cap with a hole in the top. Sitting inside and below the seat is a small metal spring.
What to do if there is no water shut off valve?
If there are no shutoff valves under the sink, turn off the water to the entire house at the home's main shutoff valve, then turn on both sides of the faucet to relieve pressure in the supply lines.
Can you reinstall a faucet stem?
Note the position of the stem before removing it. You must reinstall it in exactly the same position for the faucet to work properly. Stems usually have one or more tabs that fit into notches in the stem housing to help you align the stem, but you can still get the stem backward. It might be helpful to take a photo of the stem for reference.
