Fixing a Dripping Delta Single Handle Kitchen Faucet
- SHUT OFF THE COLD AND HOT WATER VALVES UNDER THE SINK. ...
- REMOVE THE BUTTON AND SCREW THAT HOLDS THE HANDLE IN PLACE. ...
- REMOVE THE CAP. After removing the handle, you can proceed to remove the cap. ...
- USE THE WRENCH TO REMOVE THE CARTRIDGE RETAINING RING. An adjustable wrench is the perfect tool to complete this step. ...
- REMOVE THE OLD CARTRIDGE AND INSTALL THE NEW ONE. The faucet’s cartridge is held in place by the retaining ring. ...
Full Answer
Is it hard to repair a drippy Delta Faucet?
Here’s a guide:
- Turn off the main water shutoff valve so that water is cut off from the faucet. ...
- Find the screw connecting the handle to the faucet system. ...
- Use a Phillips screwdriver or an Allen wrench to remove the screw. ...
- Use needle-nose pliers to remove the retaining pin holding the cartridge.
- Use pliers to grip the valve system then pull the cartridge out.
How to fix a leaky delta style bathroom faucet?
Materials
- New rubber seat and spring (one set for each handle)
- Plumber's grease
- Replacement stem (as needed)
How can I stop a leaky Delta sink faucet?
To replace the stem:
- Shut off water supply.
- Cover drain opening so parts won’t fall into it.
- If you have lever handles, loosen the set screw with an Allen wrench and remove the handle. ...
- Unscrew bonnet nut. ...
- Pull stem straight up and out.
- IMPORTANT—STEM MUST BE REPLACED PROPERLY. ...
- Screw bonnet nut on and hand tighten.
- Replace handle, tighten screw.
How to repair a leaking Delta tub spout?
Remove a Slip-On Spout
- Remove the Set Screw Look for the set screw underneath the spout, close to the wall. ...
- Slide Spout Away From Wall Slide the spout away from the wall gently when you've completely removed the screw from the spout. ...
- Remove Old Caulk and Plumber's Tape Remove old caulk and plumber's tape before reinstalling the spout. ...
How do I fix a dripping Delta faucet?
0:002:11How to fix a leaky dripping Delta faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's usually a screw it'll either screw off or there's a screw hole on the side as is the case onMoreThere's usually a screw it'll either screw off or there's a screw hole on the side as is the case on this one. So once you remove the handle you'll reveal the valve.
Why is my Delta faucet dripping?
0:018:33Delta Faucet Dripping from Spout? How to fix it in - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this is a spring let's get started. Sometimes you can find out whether it's the hot or coldMoreAnd this is a spring let's get started. Sometimes you can find out whether it's the hot or cold faucet that's dripping by simply feeling the temperature of the drip.
Why does my Delta kitchen faucet drip?
Your Delta® faucet is designed for leak-free performance. Through normal use, and depending on the water conditions in your area, the seats and springs experience wear and may need to be replaced occasionally. It is also possible that there is sediment or debris in your faucet.
How do you fix a Delta single handle kitchen faucet?
1:078:56Delta Kitchen Faucet Leak Repair (Single Handle) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to removeMoreThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to remove the set screw in the handle. Put the set screw in a parts pole to ensure that you will not lose.
How do I change the O rings on my Delta kitchen faucet?
1:112:57How to repair a leaky Delta faucet. - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean off all the old grease. Each package comes with two o-rings slide the first one on the secondMoreClean off all the old grease. Each package comes with two o-rings slide the first one on the second one will slide right over the top of the first one.
How do you take apart a delta bathroom faucet?
1:047:21How to fix a leaky delta style bathroom faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I'm going to start with is I'm gonna pull a knife out something sharp you can use a flatMoreSo what I'm going to start with is I'm gonna pull a knife out something sharp you can use a flat bladed screwdriver. And I'm going to pry off the cap. That's on there next on all the deltas at least
How do I fix a dripping kitchen faucet?
0:173:00How to Fix A Dripping or Leaky Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can replace one specific part but it's usually best to get a kit and replace all the parts alsoMoreYou can replace one specific part but it's usually best to get a kit and replace all the parts also buy a new aerator if yours is damaged.
How do you fix a dripping kitchen faucet?
To stop drips at the spout or correct problems with hot and cold mixing, remove the cartridge and either replace the O-rings on the cartridge if they're worn or replace the entire cartridge. Take the cartridge to the home center or hardware store to find a replacement.
Are Delta faucets guaranteed for life?
All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.
How do you fix a leaky Delta single handle bathroom faucet?
0:004:37Delta Peerless Bathroom Single Handle Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just use a small slotted screwdriver and pry off the decorative cover to loosen that set screwMoreAnd just use a small slotted screwdriver and pry off the decorative cover to loosen that set screw you can use 1/8 inch allen wrench or you can get this combo tool and this has 1/8 inch allen wrench.
How do you take apart a Delta faucet head?
0:462:21How To Clean a Delta® Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipLikely just that mineral build-up you'll need to remove your spray wand don't worry this is superMoreLikely just that mineral build-up you'll need to remove your spray wand don't worry this is super easy on some faucets you can just remove your spray wand by simply unscrewing it.
How do you change a Delta single handle cartridge?
0:2712:08Delta Single Handle Faucet Cartridge Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet. This particular one is from Delta. All the other manufacturers have this style as well it'sMoreSet. This particular one is from Delta. All the other manufacturers have this style as well it's called a single lever faucet. And sometimes they're on the side like this on across the deck.
How do you fix a leaky Delta single handle bathroom faucet?
0:004:37Delta Peerless Bathroom Single Handle Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just use a small slotted screwdriver and pry off the decorative cover to loosen that set screwMoreAnd just use a small slotted screwdriver and pry off the decorative cover to loosen that set screw you can use 1/8 inch allen wrench or you can get this combo tool and this has 1/8 inch allen wrench.
Are Delta faucets guaranteed for life?
All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.
What is a delta faucet?
Delta bathroom and kitchen faucets with two handles often are stem-style faucets that include a neoprene valve seat and spring that fits into the faucet below a cartridge-like insert stem. This is different from a true cartridge-style faucet, which closely resembles a stem faucet but does not have valve seats and springs.
How to tell if a faucet is leaking?
Determine Which Side Is Leaking. Place your hand under the drip from the faucet. If the water is warm, the leak is most likely on the hot side of the faucet. If the water is cold, the leak is most likely on the cold side. This tells you which is the better side to fix first, but it's possible that both sides are leaking in any case.
What is a stem style faucet?
With a stem-style faucet, a neoprone valve seat and spring fits into the water inlet port in valve body. Over the valve seat and spring, the stem is held into the body with a bonnet nut; the handle then fits onto the top of the stem. Leaks in this type of faucet usually can be fixed with a new neoprene valve seat and spring.
How to remove valve seat and spring?
Remove the seat and spring by inserting a small screwdriver or Allen wrench into the hole of the seat and pulling up both parts together. Note the spring's orientation inside the valve seat. The spring should be slightly larger in diameter at the bottom than at the top—where it fits into the seat.
How to replace a valve stem?
If desired, you can also replace the O-ring (which is sometimes included with stem-and-spring kits) or the entire stem. Fit the stem into its housing, aligning the tabs on the stem with the slots in the housing. Push the stem all the way down until it stops.
How do I shut off the water in my kitchen sink?
The valve may have a small football-shaped handle or a lever or knob. Turn the handle clockwise until it stops. Open the hot or cold faucet, as appropriate , to make sure the water is off.
Where is the valve seat on a faucet?
Look inside the stem housing and locate the neoprene valve seat sitting in a hole at the bottom of the faucet housing. The valve seat is a small, black, rubber cap with a hole in the top. Sitting inside and below the seat is a small metal spring.
How to check for leaks in water valves?
Turn on the water at the valves and check for leaks. Start out with the water on cold and on with about half the maximum pressure. If things look OK with the half pressure then turn the cold water on all the way. Again, check for leaks. Once you're sure things are OK, turn on the hot water. ...
How to remove a swivel aerator?
Step 1: Remove old end, aerator (looks like a cap with a little screen), or previous swivel that broke and part is still there; carefully clean the threads. Step 2: Use one layer of Teflon tape around the outer threads. Converter first, then swivel. Hand tighten to be very snug, and do not wrench.
