Kettle Method for Reshaping a Felt Hat
- Put a tea kettle to boil on a gas stove or electric range.
- Open the spout and keep the steam between 6 to 8 inches away to avoid burning yourself and damaging the hat.
- Steam the hat with the inside facing you — steaming the hat from the underside can ruin the sweatband, especially if...
- Be careful with any non-felt embellishments and...
How to easily waterproof a felt hat?
Transcript
- 0:05 hi I'm Eric Watson at Watson's hat shop
- 0:08 and historical Cave Creek Arizona here
- 0:11 at Watson's hat shop we make fine
- 0:13 tailored custom hats to any style today
- 0:16 I'm going to show you how to waterproof
- 0:18 a felt hat or rather you don't need to
- 0:22 waterproof a felt hat European hair and
- 0:25 beaver fur felt hats do not need to be
How do you stiffen a felt hat?
To stiffen felt, you will need:
- felt
- white school glue
- warm water
- old container
- wax paper
- iron and ironing board
How to starch a felt hat?
- Roll a terry cloth towel into a cylinder and mold into a circle.
- Place the hat on a flat sheet of newspaper, outside or in a well-ventilated area.
- Allow the outside of the hat to dry for 10 seconds and flip the hat over.
- Flip the hat over right away.
How to make a leprechaun hat from felt?
how-to:
- Cut out all the pattern pieces from felt. The easiest way to do this is with freezer paper. ...
- Embroider the designs and the face through the paper patterns. Use simple back stitch and satin stitch to fill in the areas.
- Use fabric glue to attach small elements such as the hat band, shoe buckles, and nose.
How do you fix a ripped felt hat?
1:013:12Reparing a Damaged Hat - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere you don't need a professional steamer. You can just boil a kettle or steam your iron as long asMoreHere you don't need a professional steamer. You can just boil a kettle or steam your iron as long as you get some moisture back into the Hat you'll find that you get your hand underneath it.
How do you fix a felt hat at home?
Using SteamHave either a steam iron or tea kettle on hand. ... Once the kettle or iron starts producing steam, hold the hat beyond this distance within the direction of the steam. ... As the steam hits the felt, the fibers will start to loosen, becoming more pliable and letting you reshape the material.More items...•
How do you restore a felt hat?
0:323:50How to Restore Felt Hats : Felt Hats - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe would heat this all up warm followed up and we also would then take this and use what's called aMoreWe would heat this all up warm followed up and we also would then take this and use what's called a foot to liquor. And we get this all pushed down exactly level on the board.
How do you Reblock a felt hat?
7:5019:41How to Shape a Hat at Home - Easily Re-blocking Men's Fedoras, Trilbies ...YouTubeStart of suggested clipEnd of suggested clipYou can take your damp hat and put it in the pathway of the steam. Make sure to work the hat aroundMoreYou can take your damp hat and put it in the pathway of the steam. Make sure to work the hat around fairly thoroughly getting both the outside. And inside of the crown. Steamed.
How do you fix a floppy hat brim?
0:314:33How to Fix Your Floppy Hats (EASY TUTORIAL) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I did it and I went from floppy hat to a nice beautiful stiff hat with a perfect shape again. SoMoreSo I did it and I went from floppy hat to a nice beautiful stiff hat with a perfect shape again. So I'm going to show you exactly how I did it super simple I'm so mad that I didn't even try it like
How do you steam a hat back in shape?
1:177:02How To Steam and Reshape A Hat - Hats Unlimited - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust like ironing. It's you know wrinkles out of your clothes steam. Will get the wrinkles out ofMoreJust like ironing. It's you know wrinkles out of your clothes steam. Will get the wrinkles out of your hat. And put it back into the form that it's supposed to be in.
Can felt hats be repaired?
At this time a hat can be made smaller or larger. The brim and crown are then ironed to create a smooth working surface. The crown and brim are then pounced, powdered and dry ragged to regain color and finish. This procedure can be repeated as many times as needed to gain the proper finish.
Why do you put a cowboy hat upside down?
Most cowboy hats are turned up on the brim, setting the hat upside down will keep the brim from flattening and help hold its original shape.
How do you reshape a vintage felt hat?
0:351:44How to Steam and Reshape a Felt Hat - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's got a bit of a wave in it just soften it up. Take. It you can lay it flat on a table. Get. ItMoreIt's got a bit of a wave in it just soften it up. Take. It you can lay it flat on a table. Get. It back to a nice shape a round crown wall hat here sometimes you can just pop them back out.
Can you reshape the crown of a felt hat?
1:383:30How to reshape the crown on a felt hat - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd they kind of just push down on it like that you'll see that crown really push. Out okay and thenMoreAnd they kind of just push down on it like that you'll see that crown really push. Out okay and then here at the shop. We have these plates. Professionally built and so we got these plates and local
Can you Reblock a hat?
0:171:24Can Felt Hats Be Reblocked? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make it look new again. And yes a felt hat can be reblocked. If it is a good felt um wool hatsMoreAnd make it look new again. And yes a felt hat can be reblocked. If it is a good felt um wool hats are very difficult to reblock so it has to be genuine for a felt or beaver fur fell.
How do you stiffen a wool felt hat?
0:243:27How to Stiffen Wool Felted Hats : Felt Hats - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first thing we do is we have our solution here it's a special Greg commercial hat or shellac. AndMoreSo first thing we do is we have our solution here it's a special Greg commercial hat or shellac. And we use a brush. And we dip it in there.
How do you fix a flattened hat?
Fill your kettle with water and put it on the stove until it's producing lots of hot steam. Place your misshapen hat in the path of the steam so it permeates the inside and outside. The steam will quickly make your hat warm and soft. This is when you can start reshaping your hat with your hands.
How do you fix a crushed wool hat?
0:538:45How to fix a crushed hat. - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's going to be a couple items that you need the first thing is going to be a steamer you canMoreSo it's going to be a couple items that you need the first thing is going to be a steamer you can either pick up a handheld steamer.
How do you put a patch on a felt cowboy hat?
3:4810:32Sewing an embroidered patch on a hat - VLOG - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff sticky surface which means i can just stick. It right where I want it on the Hat. And thisMoreOff sticky surface which means i can just stick. It right where I want it on the Hat. And this really helps for sewing. Because if you don't have that then the patch.
Wednesday, July 10, 2013
While my muse is being obstinate, I thought I might share an interesting article or two that I have previously published elsewhere. I believe they will be quite relevant here, as well. Please enjoy them while I throttle my muse for a bit!
How to Repair a Felt Hat (Vintage or Otherwise)
While my muse is being obstinate, I thought I might share an interesting article or two that I have previously published elsewhere. I believe they will be quite relevant here, as well. Please enjoy them while I throttle my muse for a bit!
How to restore a felt hat?
But on the bright side, there are a few tried-and-true methods to help you restore a felt hat. Brush your hat to remove any loose dirt and dust. Use a soft-bristle hat brush. Gently brush the crown and brim of your hat counterclockwise, and brush the top ...
How to make felt hats soft?
Reshape your felt hat by using steam; this will make the hat soft and pliable. Hold the hat over steam for about 1 minute. Do not get the hat soaking wet. Reshape the brim as needed, or dent the crown using your hands until you are satisfied with the shape. Allow the hat to dry on a hat form.
How to get lint out of tape?
(See reference 2) Clean stains with baby shampoo and water. Put one tsp. of the shampoo in one cup of warm water. Pour about a tbsp. on the stain. Massage it gently into the stain with a hat brush.
How to remove fuzz from felt hat?
Use a soft-bristle hat brush. Gently brush the crown and brim of your hat counterclockwise, and brush the top of the hat toward the back, suggests Renton Western Wear. This will loosen debris and lift the nap of the felt. Remove stubborn lint or fuzz balls with painter's or masking tape.
How to get fuzz balls out of a vacuum?
Remove stubborn lint or fuzz balls with painter's or masking tape. Wrap the tape around your hand with the sticky side facing up. Apply it lightly to the area where you see lint, and then quickly remove the tape. The lint should stick to the tape. You can also use your vacuum cleaner if it has a brush attachment.
Can you use hairspray on felt hats?
Many people try to take a shortcut using starch or hairspray, but that is not recommended and will cause buildup and residue over time. Invest in water repellent and stain protector spray made for felt hats once you have restored your felt hat to keep it looking good.
How to get wrinkles out of hat?
Just as ironing will get the wrinkles out of clothes, steaming will remove the crinkles out of a hat. Put a tea kettle to boil on a gas stove or electric range. Open the spout and keep the steam between 6 to 8 inches away to avoid burning yourself and damaging the hat.
How to adjust a hat to fit your head?
Let the hat cool down and set, but not completely. Put the hat firmly on your head to make sure it conforms to your head shape. Keep it on for at least a few minutes — this allows the hat to adjust to the shape of your head for the most comfortable fit. Once it's dry, your hat is ready to wear.
What is felt hat?
Before we continue about felt hats, you might be asking yourself, "What exactly is felt, anyway?" It's a popular hat fabric most often made of wool, a natural fiber that comes directly from a sheep's coat. If this wool is spun into thread and woven, it's called felted wool. If it's produced by using heat, moisture, and pressing the wool fibers together, then we refer to it as pure wool felt. Back in the early days of millinery, hat-making felt was produced using rabbit fur or beaver fur.
How to get a flat brim on a hat?
If you are trying to give the brim a little upward curve, such as those on a Stetson hat or typical western hats, use your fingers to curl and hold the brim upward until it's molded to your liking. If you want a slightly downward slope like those seen on safari hats ...
Is a felt hat a fur hat?
For our purposes, a felt hat is a wool felt hat, not a fur felt hat. That said, there are felt hats made from blended fibers like ...
The Catalena Hatters Felt Hat Restoration Process
To start the renovation process each hat is stripped of the old leather, lining and band. Hat is inspected for cuts, breaks, and holes in crown and brim. Surface dirt is removed and hat is chemically treated for different types of stain.
Shipping and Payment Instructions
Enclose your hat in any box. Let us know if you have any changes to make on your hat in reference to head size or crease.
How to fill moth divots?
Moth "divots", shallow ones, can be "filled" by applying a tiny bit of clear glue and "shavings of felt" scraped from an inconspicuous part of the hat and glued into place, then smoothed, sanded, and ironed. Felt is one of the strongest "fabrics", again it is not a fabric, known to man. Tough as nails.
Can felt be repaired?
Felt is not a fabric. It cannot be rewoven. It cannot be repaired. It is made thru the process of "felting". Heat, friction, and so on.. Once the hat is completed, it is "it". You can glue a piece of backing on the inside of the hat, and using clear glue, "repair" it. But it won't ever, ever, be the same.
