- Cut two patches in a circular shape, using the patterned Intex patching material. ...
- Place a pea-sized drop of adhesive around the hole on both the inside and outside of the pool surface and on both patches. ...
- Apply one patch inside of the pool surface, smoothing the patch from the center to the outer edges. ...
- Allow the patched area to sit for 10 to 15 minutes, then repeat the smoothing process to ensure a tight bond.
How to easily drain your Intex pool?
- Turn the pump off.
- Roll backwash hose out into the yard or approved draining area.
- Rotate the multiport valve on the top or side in a clockwise direction to the “Waste” position.
- Turn the pump back on.
- After you get the correct amount of water out of your swimming pool, turn the pump back off.
How to drain my Intex pool?
- Shut off the pump.
- Go to the back of the filter and unscrew the drain plug.
- Turn the pump back on and let the water run until it reaches the point where you want to drain the water out.
- Turn the pump back off and put the plug back into the drain plug.
How to drain Intex inflatable pool?
How to Drain an Intex Pool
- Locate the drain valve on the outside of the pool and remove the cap.
- Place a hose on the ground with the female end lying next to the pool (near the drain valve) and the male end in an area where water ...
- Attach drain plug connector to the hose and screw into the drain valve. ...
How unlevel can an Intex pool be?
How unlevel can Intex pool be? Any more than two inches is unacceptable. Intex pools that are three inches off or more will not last and no one should be swimming in one. Not only does it look very bad, once the uneven wall starts to create the outward pressure one side it will eventually push the pool out of shape more and more.
How to tell if pool liner is leaking?
When to start looking for replacement liner?
What is a patch kit?
How to know if you have a leak in your pool?
Why does my pool patch fail?
How to level pool water in bucket?
What to do if you find a tear in a liner?
See 2 more
Can you patch an Intex pool liner?
Yes. You can definitely patch an Intex pool. Since Intex pools are made from almost the same material as vinyl pool liners, you can easily patch them, even on the outside.
Can you patch a pool liner underwater?
Yes, of course. Patching a pool with water in it is a simple process. The first thing you need to do is identify the area of the leak. Next, find a patch material that matches the shade of your current liner.
Is it worth patching a pool liner?
The more important factor to consider is whether your liner is worth trying to patch. If your liner is two years old and in great shape except for an 8-inch tear on the back wall, it's certainly worth trying a patch. The tear is large, but the vinyl is otherwise strong and in a spot that won't get much traffic.
Can you repair rip in vinyl pool liner?
You can repair a large rip in a vinyl pool liner without the need to drain the pool. Breaches in the vinyl liner should be addressed immediately to avoid more costly repairs. Leaks in a pool liner may cause extensive damage to the outer structure of the pool itself or even create a sinkhole in the surrounding area.
Does Gorilla Tape work on pool liners?
Found a tear in your pool liner? At 4" wide, Gorilla Waterproof Patch & Seal Tape can be used to patch holes, cracks, gaps and tears, even underwater!
Can Flex Seal fix a pool liner?
It's inconvenient and pool liners can cost hundreds (sometimes thousands) of dollars to replace. That's why we recommend keeping Flex Tape or our Pool patch and repair kit nearby. The next time you find yourself with this problem, just use Flex Tape and your pool leak will be repaired in a matter of minutes.
Does Flex Seal tape work underwater?
It's adaptable! Wet or dry surface, doesn't matter. Flex Tape® works instantly on both. In fact, you can use it underwater too.
What kind of glue do you use to patch a pool liner?
If your vinyl pool liner needs patching, HH-66 Vinyl Cement is the answer. The world's most effective PVC vinyl adhesive is ideal for mending liner tears, spa covers, and most inflatable vinyl pool toys. It works underwater, sets in minutes, and holds fast even in extreme conditions.
What is the best way to patch a pool liner?
1:326:40How to Patch your Swimming Pool Vinyl Liner! | The Ultimate PatchYouTubeStart of suggested clipEnd of suggested clipSo never cut your patches. Square. Always cut them round. And if for an example i have a hole hereMoreSo never cut your patches. Square. Always cut them round. And if for an example i have a hole here and i want to patch it all we want to do is cut the patch.
How do you fix a tear in a vinyl pool?
0:392:15How to Repair/Patch a Leaking Vinyl Liner Pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking sure to round any sort of corner. So there's nothing that can be grabbed and pulled up makingMoreMaking sure to round any sort of corner. So there's nothing that can be grabbed and pulled up making sure it has a tight seal. We're going to be applying the boxer adhesive to the vinyl patch.
How do I fix a large hole in my pool liner?
How to Patch a Pool LinerWarning: we strongly advise against draining your pool unless absolutely necessary. ... Step 1: Clean the area. ... Step 2: Trim the patch as needed. ... Step 3: Apply adhesive if you're using it.Step 4: Stick it and immediately apply pressure.
What happens if pool liner rips?
For above-ground pools, a pool liner tear near the bottom could cause enough force to cause the pool to collapse entirely. Soil erosion: Liner rips can also lead to soil erosion and yard damage due to the consistent leaking of pool water and chemicals.
How do you fix a tear in an inground pool liner?
0:392:15How to Repair/Patch a Leaking Vinyl Liner Pool - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaking sure to round any sort of corner. So there's nothing that can be grabbed and pulled up makingMoreMaking sure to round any sort of corner. So there's nothing that can be grabbed and pulled up making sure it has a tight seal. We're going to be applying the boxer adhesive to the vinyl patch.
How do you repair a tear in an inground pool liner?
0:001:01What to do when pool liner tears - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat do you do if the vinyl liner in your swimming pool has ripped or torn. Well typically speakingMoreWhat do you do if the vinyl liner in your swimming pool has ripped or torn. Well typically speaking you can patch it much like an inner tube in a bike you can get a patch kit that you can put over
Does Flex Seal tape work underwater?
It's adaptable! Wet or dry surface, doesn't matter. Flex Tape® works instantly on both. In fact, you can use it underwater too.
How do you fix an underwater pool leak?
1:344:03Pool leak repair without draining your pool DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe other thing you need is something soft put on top of the patch after. This is if it's at theMoreThe other thing you need is something soft put on top of the patch after. This is if it's at the bottom of your pool.
How to tell if pool liner is leaking?
Before you start slapping on patches and gluing your fingers together , you may want to check if you actually have a leak in the first place. If there’s a hole the size of Texas in your pool liner, that’s a pretty obvious sign, but it’s not always so clear.
When to start looking for replacement liner?
After the first patch, it’s time to start looking for a replacement liner. I don’t mean you have to run out right away to buy a brand new one, but the liner itself is only going to get worse as time goes on.
What is a patch kit?
There are whole patch kits that come with a cover and adhesive. They include a cover and adhesive that can be put over the larger tears. If it’s a bigger tear than tape or a sticker can handle, a patch kit is the next step up.
How to know if you have a leak in your pool?
If you’re just losing water to increased temperatures and evaporation, the water levels should evaporate at roughly the same rate. If your pool level is significantly lower than your pool level, then you’ll know that you have a leak on your hands.
Why does my pool patch fail?
The same concept applies here but instead of sticky child fingers, it’s chemicals, algae, and dirt floating in your pool that’ll cause the patch to fail.
How to level pool water in bucket?
Step 2: Use your pool steps to place it in a location where the water in the bucket and the pool water outside the bucket are at about the same level. Step 3: Mark the level inside the bucket. You can use a sharpie marker or a grease pen.
What to do if you find a tear in a liner?
Once you’ve found the tear or tears in your liner, the next step is to patch them. The steps for all patches are basically the same, so we’ll cover the steps you’ll need to take no matter which type of patch you’re looking to use.
What do you need to patch an Intex pool?
There will be a tool kit which comes with all intex pools bring it where you are patching the pool. You also need scissors for patching so, bring them too.
How long does it take to patch a pool?
If you have gone through our all article than you will be able to patch your pool with in the 20 minutes not more than this and you can save your money which you are going to pay to the professionals who are going to patch you pool for yourself.
When to patch your pool?
If you want to save your money and time form the pool professionals that charge high prices to patch your pools then you need to look carefully that when you need to patch your pool.
What happens if you leave your pool covered?
If you leave your pool covered after filling the water but when you open it the amount of water is very low then this is the sign for you that your pool is leak and you have to patch it as soon as possible.
How big is a half inch patch?
Sometimes the size of the patch is also very important if you are dealing with the half inch patch then you can tackle it but the patch is about 6 to 7 inches still you can try to tackle it with the pool lines but there are many chances that it would not be handled by the pool liner and the last decision you have to made is to purchase the new pool.
Can you use transparent tape on pool patch?
If all these are perfect and your first patching kit is not performing good then you need to work with this transparent duct tape. It is another one of the most popular tool for the patching of the pool. There are many chances that when you will going to apply this transparent duct tape on the hole then it will not leak again.
Does pool liner work for bigger holes?
Now if the above two methods are not working for you or your pool has the bigger hole then this way would be perfect for you. Pool liner works perfect for the pools which have larger holes because of its big sizes.
How to clean pool liner with patch?
You can use a rag, pool brush, or gentle scrubber pad to wipe it clean.
Why are vinyl pool liners so popular?
Conclusion. Vinyl pool liners are a popular choice among pool owners for a lot of reasons . For one , they’re less expensive than concrete or fiberglass pool options. And for another, they make swimming pool maintenance much faster and easier.
How to fix a patch on a trimmed patch?
Apply adhesive. Apply a good amount of vinyl adhesive to the back of your trimmed patch. Apply the patch. Stick the patch directly onto the hole and press out any seams or bubbles. Hold in place. Allow the adhesive to cure by holding the patch firmly in place for a couple of minutes.
How to patch a hole in a wall?
For peel-and-stick patches, just peel the paper backing off and apply the patch to the area with the hole.
What happens if you put water in an inground pool?
This can cause a great deal of damage and instability.
How much water does a pool lose in a year?
Keep in mind that most pools lose about ¼ - ½ inch per day during the summer due to evaporation. To put that in perspective, that’s about 25,000-50,000 gallons of water per year!
What happens if you leak dye?
If you do have a leak, you’ll see the dye stream steadily toward it, seeping out with the rest of the water.
Why You Need To Know How To Patch Your Pool Liner
If youre a pool owner, its non-negotiable that you know how to patch your pool liner. Not only should you know how to patch the liner effectively, but its something that needs to be done quickly.
How To Find Out If You Have A Pool Leak
In many cases, a pool leak can be big enough to be perceivable by water level checks. In some instances though, pool owners might remain in the dark for long before noticing the leak.
Offering A Full Range Of Vinyl Pool Repair Services
Repair your pools liner In addition to vinyl pool leak repair , we also repair waterline sun rot damage. When the top portion of your liner degrades, you know the rest of the liner is coming down the home stretch. But if you cant afford the inground pool liner replacement cost just yet, we can buy you some time with expert repairs.
Tips For Patching A Pool Liner Underwater
Get some help. An extra pair of hands never hurts, especially for larger repair jobs.
If Your Vinyl Pool Liner Needs Patching Hh
The worlds most effective PVC vinyl adhesive is ideal for mending liner tears, spa covers, and most inflatable vinyl pool toys. It works underwater, sets in minutes, and holds fast even in extreme conditions. And it bonds with just a single application.
Alternatives To Vinyl Liner Pools
If youre in the market for a new inground pool and the idea of fighting wrinkles and other liner issues sounds like more trouble than its worth, maybe you should consider a fiberglass pool as an alternative.
Testing For A Pool Leak
You can carry out a DIY test to check whether water loss in the pool is more than the amount caused by evaporation. This test can also help you spot the source of the leak. Place a 5-gallon container in the water on the second step of the pool. Fill the can with water so that it is the same height as the pools water level.
How to fix a vinyl pool liner?
Vinyl swimming pool liners can often sag or slip out of position, but luckily you have several simple ways to repair them. Try pouring boiling water onto the affected area of vinyl, making sure to leave 1 to 2 inches at the top so you can grab hold of it .
What to use to repair a pool liner?
Use a vinyl patch kit. A common problem with pool liners is that small holes or tears can develop from impact damage or sharp debris in the pool.
How to get vinyl out of pool?
Alternatively, you can heat an area of the vinyl by blow drying it from about 2 inches away. Once the heat from the boiling water or hair dryer has softened the vinyl, pull it up from the top to stretch it out. Fit it back into the metal trap around the top of your pool, which is designed to hold the vinyl in place.
Why does vinyl liner pop out?
A familiar sight each season for many vinyl-liner pool owners is sags or gaps at the track that holds the liner in place. Constant fluctuations in temperature over the winter can cause the vinyl to stretch and pop out at certain spots—most often at corners or where there is plastic trim in a concrete deck that meets with the pool coping.
How to stretch a liner?
Heat an area of the liner to stretch by holding the blow dryer a couple of inches from the surface and at an angle. Keep the dryer moving so you don't burn the liner. You don't need to superheat the liner—just get it warm enough to make it pliable. ...
How to get rid of sagging vinyl?
Slowly pour the hot water directly on the sagging vinyl below the top edge. Use a kettle or can with a long spout, such as a watering can. Do not pour onto the very top edge of the vinyl, but just below the top, because you next have to grasp that top edge. Pour slowly back and forth across the vinyl. 2.
How to keep vinyl in place?
Starting on one end, firmly twist the top edge horizontally and push it into the metal track. The top underside of the vinyl has a V shaped groove which should slip into a similar V groove in the top metal track. You should feel the edge of vinyl slip into the groove, which is supposed to keep it in place.
How to repair a rip in a vinyl pool liner?
But fortunately, no draining is required. The best way to repair a rip is with the water still in the pool.
How to get rid of a patch that is coming loose?
A square edge or corner on the patch is more likely to tear away or come loose from the liner. Clean the area where you're applying the patch with rubbing alcohol or a mild solvent. Removing algae or grime gives the patch a better chance of sticking.
How to get a patch to stick?
Clean the area where you're applying the patch with rubbing alcohol or a mild solvent. Removing algae or grime gives the patch a better chance of sticking.
How big should a patch be on a tear?
Cut the patch to so that it's 2 inches larger on all sides than the size of the rip. If the patch is significantly larger than the tear, it allows enough surface area for the adhesive to cover the rip and hold.
Can you use duct tape to repair a pool liner?
Never use duct tape to repair a pool liner. It cannot withstand the weight of the water in the pool and will give way, making the rip larger and causing more problems.
Can you drain a pool rip?
But fortunately, no draining is required. The best way to repair a rip is with the water still in the pool. Don't ignore the tear for long, however. As soon as possible, repair the rip with a vinyl repair patch kit that is designed for repairs done under the water.
How to tell if pool liner is leaking?
Before you start slapping on patches and gluing your fingers together , you may want to check if you actually have a leak in the first place. If there’s a hole the size of Texas in your pool liner, that’s a pretty obvious sign, but it’s not always so clear.
When to start looking for replacement liner?
After the first patch, it’s time to start looking for a replacement liner. I don’t mean you have to run out right away to buy a brand new one, but the liner itself is only going to get worse as time goes on.
What is a patch kit?
There are whole patch kits that come with a cover and adhesive. They include a cover and adhesive that can be put over the larger tears. If it’s a bigger tear than tape or a sticker can handle, a patch kit is the next step up.
How to know if you have a leak in your pool?
If you’re just losing water to increased temperatures and evaporation, the water levels should evaporate at roughly the same rate. If your pool level is significantly lower than your pool level, then you’ll know that you have a leak on your hands.
Why does my pool patch fail?
The same concept applies here but instead of sticky child fingers, it’s chemicals, algae, and dirt floating in your pool that’ll cause the patch to fail.
How to level pool water in bucket?
Step 2: Use your pool steps to place it in a location where the water in the bucket and the pool water outside the bucket are at about the same level. Step 3: Mark the level inside the bucket. You can use a sharpie marker or a grease pen.
What to do if you find a tear in a liner?
Once you’ve found the tear or tears in your liner, the next step is to patch them. The steps for all patches are basically the same, so we’ll cover the steps you’ll need to take no matter which type of patch you’re looking to use.
