- Sand or cut the broken ends of the rod so they’re flush. ...
- Measure the circumference of the rod. Use a flexible tape measure and wrap it around the broken end of your fishing rod.
- Cut a piece of fiberglass pole so it’s about 12 in (30 cm) long. ...
- Slide the fiberglass pole into one side of the fishing rod. ...
- Apply 2-part epoxy to the exposed side of the fiberglass pole. Open your 2-part epoxy and pour it into a bowl.
- Slide the other part of the rod onto the fiberglass and let it dry. ...
How to clean a fly fishing rod?
Method 3 Method 3 of 4: Cleaning the Fly Rod Ferrules Download Article
- Separate the rod sections.
- Clean the female (open) ferrule with a cotton swab dipped in alcohol.
- Clean the male (protruding) ferrule with a soft cloth, dipped in alcohol. ...
- Let the ferrules dry.
- Lubricate the male ferrule (s). A thin coating of paraffin (candle wax) or silicone grease is recommended.
How do you repair a fishing rod?
Method 1: Repairing a fiberglass rod
- Use 180 or 220 grit sandpaper to flatten the ends to fit easily if the cane shows a clean break.
- If the fishing rod shows a serrated edge, you can use scissors to cut the sharp edges of a radical so that the pieces are flush.
- After the cut is made, you have to use sandpaper to flatten the edges and the area.
How do you repair a broken fly rod?
Method 1 Method 1 of 3: Mending a Snapped Fiberglass Rod Download Article
- Sand or cut the broken ends of the rod so they’re flush. ...
- Measure the circumference of the rod. Use a flexible tape measure and wrap it around the broken end of your fishing rod.
- Cut a piece of fiberglass pole so it’s about 12 in (30 cm) long. ...
- Slide the fiberglass pole into one side of the fishing rod. ...
How to really fix a broken fishing rod?
How To Fix A Broken Fishing Rod | Your Step-by-Step Guide
- Understanding The Break. The way we would want to start is by taking the dowel rod and inserting it into the rod blank. ...
- Understanding The Method. The reason we use wood is that it would soak up some of the epoxies, is easy to work with and will hardly add any ...
- Tapering The Dowel Rod. ...
- Using Epoxy To Glue The Rod. ...
- Wrapping The Superline. ...
How do you repair a cracked fly rod?
2:509:25Quick Fix repair for cracked cheap fly fishing rod - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put it right on top of where the crack is opening. But I don't want it to block the guidesMoreAnd put it right on top of where the crack is opening. But I don't want it to block the guides either you know. So I'm gonna put this up. Here. It's in my aluminum stock.
Can you repair a broken fly rod tip?
In most cases, a tip that is broken a few inches from the end can be repaired without much effect on the quality of the rods performance. You can expect a slight decrease in sensitivity. Except for the most finicky light biting fish, this will not be an issue.
What is the best glue to fix a fishing rod?
Heat Glue. Heat glue isn't the only type of glue you can use. In fact, you can use epoxy or gorilla glue as well. However, heat glue works well for the simple fact that it's easy to reheat if a mistake is made.
How do you wrap a broken rod?
10:3212:04How to repair a broken fishing rod: a simple fix that lasts: part 2 Wrapping ...YouTubeStart of suggested clipEnd of suggested clipI put some extra thread wraps on it I put a little extra epoxy on it and I use the thing for years.MoreI put some extra thread wraps on it I put a little extra epoxy on it and I use the thing for years.
How much does it cost to repair a fishing rod?
Reel Repair Cost: Starting at $25 per reel plus parts (plus shipping if applicable). This is repair only, no cleaning. Repair Estimates: $15.
How do you glue a rod tip?
0:091:15Rod Building 101: Installing Tip-Tops - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis product is a hot melt glue which we will cut a small piece off of the stick to use. You willMoreThis product is a hot melt glue which we will cut a small piece off of the stick to use. You will then take this piece of tip top adhesive and insert it into the tube of the tip. Top.
Can you use super glue on a fishing rod?
The answer is yes, you can! It makes them stronger and prevents unraveling. But there's a catch- it doesn't work well with monofilament lines since these are usually made out of plastic materials that don't adhere easily to other surfaces (like glue).
Can you fix a fishing rod with super glue?
#1 Tip For Fixing Your Fishing Rod: The Glue Method One of the easiest ways to fix your rod is with super glue or hot glue. This is my go-to method if I break off a tip. You're going to use the same rod tip that was initially on the rod. The first step is to remove the tip from the rod blank.
Can I super glue a rod tip?
2:334:45DIY - How to Replace a Rod Tip - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're gonna put some superglue in here just need to put a like a drop in. There. All right nowMoreAnd we're gonna put some superglue in here just need to put a like a drop in. There. All right now we're gonna put it on here. Now you won't hold the rod level. So that way the superglue.
Can you fix a fishing rod with duct tape?
0:001:05How-to Fix A Fishing Rod Using Duct Tape Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipSometimes the female part of a rod becomes broken and it's splinters I fix mine with a little bit ofMoreSometimes the female part of a rod becomes broken and it's splinters I fix mine with a little bit of duct tape it's really very easy to do this. So you just take some duct tape.
How do you fix a broken metal rod?
0:584:09HOW TO FIX BROKEN JOINT WITH METAL ROD - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you're going to need to drill the same size as the piece of rod that you're using last. But notMoreAnd you're going to need to drill the same size as the piece of rod that you're using last. But not least you're going to need some glue.
How do you fix a ferrule fishing rod?
How to Fix Broken Ferrules on Multi-Piece Fishing RodsAssess the Ferrule's Damage. ... Mark and Center Tape Over the Cutting Point. ... Remove Broken Portion of Rod Blank. ... Take off Tape and Inspect New Ferrule. ... Re-Wrap the Ferrule with Winding Thread. ... Apply Epoxy Finish to Re-Wrapped Ferrule.
Replacing the Tip
Let’s go over a repair of this kind first. If only a short section of the tip broke off, you may be able to put on a larger tip top and use the rod. Tip tops come in graduated sizes, keep an extra one or two in one of your fly boxes or vest pockets. They take up no room or add any noticeable weight to your outfit.
Replacing a Guide
Another common repair required is replacing a missing or broken guide. If it is only one guide that got damaged in some way, just remove it before using the rod. You don’t want the guide to snag the line and damage it. Replacing that guide with a new one should be done at home.
Replacing the Tip Section
Let's say if a tip section on a 4-weight fly rod of moderate cost has broken, you may want to try and replace the whole section. If the rod is not that old the manufacturer may have a replacement available. If it is, it will include the guides and tip top and you won’t have any wrapping to do.
Replacing the Reel Seat
The most difficult repair to make is replacing the reel seat. Fly rods that are not Spey Rods typically will have either of two kinds of reel seat/grip arrangements. Rods up to about line size seven or eight will have a cigar shape, Half Well, or Full Well grip handle, and a down locking reel seat on the end.
Taking Care of Your Rod
Obviously, the best practice is to try your best to avoid having to do a repair. Keep your sectional rods in a cloth bag inside a rigid case especially when traveling. During travel time rods take the most abuse.
Rod Building Supplies
For supplies, check out sites like Mud Hole, Get Bit Outdoors, Angler’s Workshop, Proof Fly Fishing, The Rod Room, Jann’s Netcraft, Barlow’s Tackle, and Rod Geeks. They should have what you’re looking for. If you still have more questions or need to replace your whole rod, chat with a Fly Fishing Expert here on Curated.
Curated experts can help
Have a question about the article you just read or want personal recommendations? Connect with a Curated expert and get free gear recommendations for whatever you’re looking for!
Prepping the Cork
Use a pointed object or dubbing needle to clean out any loose cork particles.
Mixing the Replacement Filler
Once you have cleaned your cork, the next step is to prepare your replacement filler. You will need some fine-grit sandpaper (somewhere around 220-240 grit), a wine bottle cork, a disposable container, and some wood glue (I used Titebond II Premium Wood Glue).
Applying the Filler
Apply the filler to the areas that you previously cleaned and wipe off any excess with a damp cloth.
Finishing Touches
The finished product after 3 applications of filler and some light sanding.
Orvis Fly Rod Repairs
If you’re a customer in the United States we’re ready to get your rod repair started, but first you’ll need to sign in or create an account. For International repairs there’s a slightly different process which you can access from the button below. If you have a bamboo or one-piece rod repair please give us a call at 1-800-548-9548.
Common Repair Questions
Our Vermont rod shop will take good care of your investment. Here are a few common questions about repairs, if you have more, feel free to chat with us.
