Simple instructions for fixing your mixer:
- Unscrew the underside of the top part of your stand mixer. ...
- Inside, you will notice the machinery has a ton of grease for motor lubrication. ...
- Look for a round disk-like gear made of metal and plastic. ...
- Replace the gear with a new one, put everything back together, and remember to replace all that grease you removed with new grease.
- Voila! ...
How to fix your KitchenAid mixer without hiring a pro?
Steps
- Unplug the mixer and remove the screw off the top part and pull off the cover.
- Remove the trim band by removing the two screws at the end of the trim band that hold it in place.
- Turn the mixer over unto a padded cradle and loosen-up the pedestal hinge-pin set-screw. ...
- Take the pedestal off the mixer and gently tap-out and remove the planetary drip-ring. ...
How to repaint your kitchen aid mixer?
- Screwdriver
- Rubbing alcohol
- Rags
- Painter’s tape
- Fine grit sandpaper
- Sheet of plastic
- Spray paint- Rustoleum is the best brand here (pick the color you want)
- Enamel top coat- Clear
How do I Clean my KitchenAid mixer?
What’s the best way to clean an antique KitchenAid mixer?
- Remove the plug from the appliance. ...
- Attachments should be washed by hand.
- Make sure the mixing basin is clean.
- Spills, splatters, and food residue should all be cleaned up.
- Baking soda may be used to clean difficult spots.
- Wipe the attachment hub inside and out.
- Get beneath the hood of the vehicle.
- Thoroughly clean the beater shaft.
What are the top reasons to get a KitchenAid mixer?
- Kneading bread dough. The dough hooks effortlessly knead the dough to the perfect softness and elasticity.
- Pasta making. Similar to kneading bread, your KitchenAid will knead your pasta dough until it’s smooth, shiny, and ready to roll out.
- Making minced meat. Using the grinder attachment, you can make your own ground meat and chicken. ...
See more
What do you do when your KitchenAid mixer stops working?
The manual recommends turning off the mixer, waiting 10 or 15 seconds, and turning it back on. If the mixer still won't run, wait for 30 minutes before trying again. The unit doesn't have a reset button, so if it still doesn't operate after a 30-minute wait, you'll have to look elsewhere for the problem.
Does KitchenAid still have a lifetime warranty?
KitchenAid® cookware has a limited lifetime warranty. The warranty will cover any manufacturing, material or workmanship defects. It does not cover normal wear, abuse, accidents.
How do I reset my KitchenAid mixer?
If the mixer is overloaded, the Overload Reset Button will pop out and the mixer will shut off. Turn the Speed Control Lever to OFF. Wait a few minutes, then push in the Overload Reset Button. Turn the Speed Control Lever to the desired speed and continue mixing.
How much does it cost to fix a KitchenAid?
However, it costs from $100 to $650 to repair any KitchenAid appliance. Asides from the appliance type, other factors affect the cost to repair a KitchenAid appliance.
How many years does a KitchenAid mixer last?
Hi Katherine, The life expectancy on the mixer is approximately 15 years.
Will KitchenAid replace my mixer?
We're so confident the quality of our products meets the exacting standards of the KitchenAid brand that, if your Stand Mixer should fail within the first year of ownership, we will replace your Stand Mixer with an identical or comparable replacement.
Where is the reset button on my KitchenAid?
KitchenAid Dishwasher Control Panel ResetWhen powering down the dishwasher and turning it back on is not working, It may be best to reset the control panel. ... You can reset it by pressing two buttons on the front of the dishwasher at least five times each for a grand total of ten presses.More items...
Why did my mixer stopped working?
Broken motor coupler CAUSE: Another possible reason for mixer blade not rotating could be broken motor coupler. The cause of this could be overloading, poor quality material of the coupler and also the appliance being used for a long period. SOLUTION: In this case, the solution is to get the motor coupler replaced.
Why is my stand mixer not working?
When your stand mixer doesn't run, the problem could be a lack of electrical power, broken wires, a failed motor or control problems. First, check the outlet's GCFI breaker and reset it if it's tripped. If the GCFI is fine, see if the stand mixer runs when you plug it into an electrical outlet on a different circuit.
How long is KitchenAid warranty?
One YearLength of Warranty: One Year Full Warranty from date of purchase. 1-800-541-6390. OR The replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.
Who owns KitchenAid?
Whirlpool CorporationAcquired by Whirlpool Corporation from Dart and Kraft in 1986, KitchenAid brand offers everything from small appliances to cookware, dishwashers to double-oven ranges, and whisks to wine cellars — virtually everything consumers need to enhance their cooking experience.
Is it worth fixing a 10 year old dishwasher?
If your dishwasher repair is going to cost more than 50 percent of the cost of a new one, you should definitely consider buying new.
How do I know if my KitchenAid is under warranty?
The warranty is something specific to each product, and can normally be found on the last page of the Owners Manual. This will provide the details of coverage on your appliance.
How does KitchenAid warranty work?
- KitchenAid warrants the product to be free from defects in material and workmanship, arising under normal use for a period of three months from the date of invoice. - KitchenAid reserves the right to request proof of purchase (either in the form of warranty card or installa- tion note or invoice copy, etc.)
Does KitchenAid have a manufacturer warranty?
For two years from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, KitchenAid or KitchenAid Canada (hereafter “KitchenAid”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship ...
How much is KitchenAid warranty?
Retail Price: Enter a valid retail price. Retail price is required. Maximum product age for Service Plan coverage cannot exceed 10 years....Top 5 Coverage Features.Major ComponentCost of Repair Without a Plan¹Average 1-Year Service Plan PriceRange Thermostat$396$56Stand Mixer Motor$215$373 more rows
Does my mixer need to be adjusted?
First, determine if your mixer’s problem is the adjustment level. Look out for these telltale signs:
Do the dime test
If your mixer bowl is metal, try this trick. (Note: Do not attempt with a glass or ceramic bowl.)
Adjust the height of the beater with this quick fix
Now that you know that your beater height needs to be adjusted, all you need to do is turn one little silver screw. But first, unplug the stand mixer, just to be safe!
ONE: Wait until the little humans are out of the house
This has been on the agenda for a while since I broke the KitchenAid back in July. Knowing my penchant for being hyper-focused and a perfectionist when doing things like this, I knew any tiny distraction would send me over the edge. The second day of school was my first, best opportunity
THREE: Order a Worm Gear
Googling told me that if the KitchenAid stops spinning, the most common point of failure is the worm gear. I ordered this one because it was an OEM part and if I was going to all this trouble I didn’t want to take the risk of an after market knock-off. So I rolled my eyes and paid more in shipping than the actual cost of the part.
FIVE: Do you have a Punch Tool? No, really, this is important
Seriously, reading this far will all be worth it if I convince the next DIY-er to buy a punch tool. Knowing what I know now, I wish I had purchased this 9-piece Roll Pin Punch Set. But, I was lazy and convinced that I had enough ingenuity to figure it out without one. (I have one now just in case I find myself in this situation again.)
SEVEN: Remove the motor cover and behold a lot of greasy grease
Once the roll pin is out, you remove the planetary and nine other screws. And, pull the cord away from the machine. Easy enough. At this point, Mark tells you to “simply lift the motor off of the stand.” Ha. This is what “simple” looked like for us. “Us” because I had to call in reinforcements.
EIGHT: Use a Play-Doh toy cleaver to remove grease from the gear tower
Mark suggests a putty knife. I didn’t have one of those either. This worked well enough.
NINE: Unscrew the gear tower and remove the OTHER roll pin
At this point I was indignant. Not only was there another roll pin, and remember, NO PUNCH TOOL, this one was tiny and within a rod that spins. But I was determined, some might say militant, so I started banging away on a skinny little Allen wrench. Until I remembered that I was working on a glass table.
TEN: Replace the worm gear
Lo and behold, the internet was right. The failed worm gear’s teeth were all chewed up. But now began the other fun part: putting roll pins back in.
Where can I get my stand mixer repaired?
If you reside in the U.S. and need a repair for your stand mixer there are several options.
How to order a shipping kit?
Simply place your mixer into the box (including the bowl and flat beater so they can thoroughly test and adjust your mixer). Drop it off at a FedEx location.
Can a mixer be repaired at the factory?
The technicians at our factory will examine your mixer and will contact you with an estimate of the repair.
Does Kitchenaid have a network?
KitchenAid has a network of authorized service facilities throughout the United States.
What to do if your kitchen mixer isn't working?
You can buy the necessary parts that may need to be replaced through outlets that carry official Kitchen Aid mixer parts, too.
What to do if you aren't sure what is wrong with your mixer?
Investigating lists of various mixer brands and their common problems and issues is also a good idea if you aren’t sure what is wrong with your kitchen mixer. This way, you can look into common issues with your particular mixer and match the symptoms up.
What is worm gear in a mixer?
A worm gear is a mixer part that is supposed to break down throughout the life of your mixer. Most kitchen mixer owners, especially those who use their mixer for making thick doughs, will encounter this issue at least once ...
How often does a kitchen mixer need to be replaced?
Most kitchen mixer owners, especially those who use their mixer for making thick doughs, will encounter this issue at least once or twice during their mixer’s lifetime.
Can a kitchen mixer be fixed?
Kitchen mixers are very simple devices in all of their varying speeds and sizes. They can usually be fixed with ease. However, if you’re simply to intimidated by the idea of taking your expensive mixer apart and fixing it by yourself, you can absolutely look into getting it repaired by a professional.
Can a broken kitchen mixer be stressful?
It can definitely be stressful when an expensive appliance breaks. We hope these helpful tips helped you make a decision about your broken kitchen mixer!
Can you replace a broken mixer?
If you have a simple hand mixer that is broken, more often than not it is usually cheaper and easier to just replace it with a new one.