
A common repair involves:
- Cleaning, wire brushing, and sanding the area you need to fix.
- Warming up the exhaust system by idling the engine for a few minutes.
- Placing a piece of aluminum (cut from a soda can) over the hole or crack you need to repair (unless you're using putty,...
- Using a patch or wrapping a tape around the damaged area of the muffler or pipe.
How to know when to replace a muffler?
Sample Muffler Replacement Cost By Car Model
- Honda Civic 1999
- Muffler
- Civic EX 2000
- Exhaust Pipe and Muffler
- Toyota Camry
- Muffler
- Mercury Tracer
- New Muffler
- Chevy Silverado
- Muffler
Is it easy to replace a muffler?
You can take your car to a muffler shop for a replacement, but installing a new muffler yourself is fairly easily and cost-efficient. Automotive Learning Library. To complete your muffler installation, you’ll need a jack to lift up your car, a wrench, different sized ratchets, lubricant, and possibly a hacksaw.
How to patch a muffler cheap and easy?
The Jumbo Tiger Patch Muffler or Tailpipe Repair Tape is a mechanically approved tape that you simply wrap-around your muffler or tailpipe and it permanently seals cracks and holes in mufflers and tailpipes in minutes with no tools required. Wrap Tiger Patch firmly around damaged area, idle motor or drive vehicle for 20 minutes.
What can you use to patch a muffler?
Part 2 Part 2 of 4: Preparing Materials and Exhaust Pipe
- Obtain a tin can. The best tin can to use is a soup can about 4 inches in diameter for the standard 2 - 2.5 inch exhaust pipe.
- Use tin snips or heavy duty scissors to cut the can up the side and to cut the bottom out of the can.
- Set the cut can off to the side where it won’t be in the way.

Can a hole in a muffler be repaired?
“If you have a hole or a crack in your muffler, you definitely need to replace it. Even a small hole cannot be welded because the metal on a muffler is too thin,” Hrovat says. “If it is already corroded or rusted, it can't be welded.”
How do you fix a muffler that has a hole in it?
0:002:48How To Patch A Muffler Cheap And Easy - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you kind of just scrub. It on over the hole and fill up the hole with it I'll show you a pictureMoreAnd you kind of just scrub. It on over the hole and fill up the hole with it I'll show you a picture my muffler here in a few seconds.
Can I use Flex Seal on my muffler?
Some car owners are also wondering if they can use Flex Seal to fix leaks on their exhaust system. Manufacturers don't recommend using this product on car parts that are constantly subjected to high pressure and heat because it will affect its effectiveness, so it's best not to use it on your car exhaust.
Is a muffler easy to fix?
You can take your car to a muffler shop for a replacement, but installing a new muffler yourself is fairly easily and cost-efficient. To complete your muffler installation, you'll need a jack to lift up your car, a wrench, different sized ratchets, lubricant, and possibly a hacksaw.
How can I fix my exhaust without welding?
0:186:47How to Repair the Exhaust Pipes without Welding them / Muffler FixYouTubeStart of suggested clipEnd of suggested clipAnd therefore you have to use the correct size like for example this exhaust diameter is 50MoreAnd therefore you have to use the correct size like for example this exhaust diameter is 50 millimeters therefore you will need some adapters which will of course match with the 50 millimeter.
Can you J-B Weld a muffler?
HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system! APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!
Can you use heat tape on a muffler?
High Heat Applications Use the FiberFix Heat Wrap to fix exhaust pipes, mufflers, hot water pipes, and more!
Can you use electrical tape on a muffler?
Yes, you can, you can use it around your car exhaust manifold, or exhaust pipes. Flex seal is also a good option.
Can I use aluminum foil on my exhaust?
Next put the aluminum foil around the can, sealing off, as much as possible, all openings that will let exhaust gases, and therefore noise, escape. Don't be stingy with the foil. Wrap a few turns around the repair, then wrap wire tightly around the foil to hold it in place.
Is it safe to drive with broken muffler?
1. The Toxic Exhaust. The possibility of toxic exhaust fumes leaking into your car's ventilation system represents the largest reason for not driving with a broken or damaged muffler. You put yourself and others in serious - and potentially fatal - danger if this occurs while you drive.
What happens if you have a hole in your muffler?
Carbon monoxide poisoning – Driving with a hole in your muffler can route exhaust fumes containing carbon monoxide back into your car's interior. Even at low levels, carbon monoxide can cause serious health issues for both adults and children.
Can you patch a hole in exhaust pipe?
Small cracks or pinholes can be sealed using just epoxy or exhaust tape, but larger holes will need a patch. If the leak is a thin crack or small hole, you can proceed without purchasing or making a patch to help. If the hole is larger, you will need a patch as well as epoxy.
How much does it cost to fix a hole in a muffler?
Muffler Replacement Costs If you do need to have it replaced, expect to spend between $150 to $300. The exact amount depends on the make and model of your car, the type of muffler you replace it with, and whether or not any extra parts need replacing as well.
Can you use metal tape on exhaust?
Yes, you can, you can use it around your car exhaust manifold, or exhaust pipes. Flex seal is also a good option. Personally, I used aluminum foil tape which works well.
What is the best exhaust repair putty?
Permatex Muffler and Tailpipe Putty permanently repairs holes and leaks in exhaust systems. This two-pouch bonus pack seals out fumes at temperatures up to 2000 degrees Fahrenheit and is safe for catalytic converters.
Can you weld a muffler?
Welding the muffler offers several advantages. First, it results in a more professional finish. Second, it creates a stronger bond. This additional strength will help the muffler installation last longer.
How to fix a bent pipe?
To fix a bent pipe, your local auto parts store may lend you a pipe shaper tool to restore the pipe to its original shape. Also, make sure you have the necessary installation hardware like muffler clamps and/or U-bolts. When replacing parts, keep your system configuration within state and federal regulations.
How to stop a car from rolling?
Park your car in a well-ventilated area. Raise your vehicle and set it on jack stands or wheel ramps. Set the emergency brakes and block the wheels on the ground to prevent the vehicle from rolling. Block the front or rear wheels with wooden blocks to prevent the car from rolling while you work underneath.
Do you have to replace a muffler?
Often, you don't have to replace a whole pipe or muffler. Still, you need to fix the problem as soon as possible to prevent it from spreading and keep poisonous exhaust gases from entering the passenger area of your vehicle. With a few tools and the proper safety precautions, you can save a lot of money by patching, joining, ...
Can you replace a whole muffler?
Over time, water and acid content in exhaust gases combine to eat system components, leading to rusted, broken or leaking pipes and mufflers. Often, you don't have to replace a whole pipe or muffler.
5 Signs That Your Muffler Needs Repair
So how do you tell that it’s time to repair your muffler? Here are five tell-tale signs:
Trust The Professionals at Performance Muffler for Your Muffler Repair
At Performance Muffler, we understand that a failed muffler is a more significant issue than just having a noisy vehicle. It can lead to engine damage, poor performance, heightened emission levels, poor fuel economy, among other problems. This is why we are focused on providing you with convenient, reliable and efficient muffler repair services.
Make Your Initial Assessment
Before you start going to work, you need to assess the situation. While you might be eager to get started and repair your issue, you need to examine the region around the exhaust pipe you’re looking to repair.
Repairing Your Pipe Takes Patience
Because this is a common enough issue that many auto owners take into their own hands, there are a lot of commercial exhaust repair kids available. Follow the instructions carefully so that you’re able to replace or repair your muffler or pipes in a way that lasts for a while.
Preparing Your Car for Replacement
If it looks like the repairs are going to require you to get serious about replacing a section of broken or rusted pipe, you need to prepare your car.
Replacing a Section of Pipe
When it’s time to replace a section of pipe, you need to start by cutting off the piece that needs to go. The best tool for the job is going to be either a hacksaw, exhaust pipe cutter, or a tubing cutter with a chain.
