how to repair a nintendo ds screen

by Santino Jones Published 3 years ago Updated 2 years ago

Place your device upside down and locate the battery compartment. Find the Phillips head screw securing the battery cover in the bottom right hand corner of the device. Loosen the screw enough to remove the battery cover but leave the screw in the cover for reassembly.

Full Answer

How to clean Nintendo DS?

They may also damage screens as they can leave behind a residue that may be difficult to clean.

Slightly dampen a corner of the cloth with water and wipe off the screens to loosen any dirt or foreign material.
Using a dry portion of the same cloth, wipe the screens to dry them and finish the cleaning process.
If needed repeat the process more than once.

Did the Nintendo Switch replace the Nintendo DS?

The first year the Switch was released - 2017 or 2018 - Nintendo told its stockholders that the DS line was still strong, lots of software being released, no intent on replacing them. In 2019, Nintendo didn’t even mention the DS line to the stockholders - they only discussed the Switch.

How to fix DS?

Restart the phone.
Make sure your phone is running on the latest software version.
Make sure the Drastic DS app is updated to the latest version.

Are Nintendo DS and DS the same?

Nintendo Ds was released much earlier when compared with Dsi, which was released after 2 years. Nintendo Ds has a single camera, whereas Dsi has dual digital cameras. Nintendo Ds lasts for a shorter period time whereas Dsi lasts for a much longer time period. Nintendo Ds is heavier, whereas Dsi is lighter in weight.

How much does it cost to fix a DS screen?

Though the device's warranty doesn't cover physical damage, upon inquiry Nintendo of America offered to repair the system for $65 plus an additional shipping and handling fee, which varies by location.

Can you fix a Nintendo DS screen?

0:089:48How to Fix/Repair NDSL/DS Lite Top/Upper LCD Screen 1/3YouTubeStart of suggested clipEnd of suggested clipAlright let's get into the repair. Take your Phillips head screwdriver. And take off the screw onMoreAlright let's get into the repair. Take your Phillips head screwdriver. And take off the screw on the battery cover. And take out the battery. And then get your Phillips head screwdriver.

How do I fix my DS bottom screen?

6:3722:24How to Repair DS Lite (NDSL) Bottom LCD Screen - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use the small flat-head screwdriver if you'd like now that we've got the topping it off weMoreYou can use the small flat-head screwdriver if you'd like now that we've got the topping it off we can set that to the side.

How do I fix the top of my DS screen?

4:526:22How to Repair a Nintendo DS Top LCD Screen | Original NDS RepairYouTubeStart of suggested clipEnd of suggested clipScrews take the upper screen cover and press it in place making sure that everything is closedMoreScrews take the upper screen cover and press it in place making sure that everything is closed nicely. Open up the ds. We will screw back the four driving screw to close off the top. Shelf.

How old is a Nintendo DS?

The first Nintendo DS was launched in 2005. Since then, several newer versions of the system have been launched: the Nintendo DS Lite, the Nintendo DSi and the Nintendo DSi XL. Each system had different characteristics, but they all played Nintendo DS games.

How do I fix my DS hinge?

0:402:03How to replace original DS Hinges - DS Hinge Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the short one goes this side of the shell. So to put them in you should be able to there's someMoreAnd the short one goes this side of the shell. So to put them in you should be able to there's some notches inside the shell. So you just want to twist it around and pop in the metal.

How do you open a DS screen?

Removing Scratches on the Nintendo 3DSUse a soft microfiber cloth designed for electronics or glasses. ... Dampen the cloth with water only. ... Wipe off the touch screen and the upper screen. ... Use a dry part of the microfiber cloth to dry the screens thoroughly.Dab any dust or smudges with a piece of transparent tape.More items...•Jan 6, 2020How Can I Repair a Scratched Nintendo 3DS Screen? - Lifewirehttps://www.lifewire.com › repair-scratched-nintendo-scre...https://www.lifewire.com › repair-scratched-nintendo-scre...Search for: How do you get scratches out of a DS Lite screen?

How do I change the touchscreen on my DS Lite?

How to Calibrate the Touch ScreenSelect the System Settings icon on the HOME Menu, and tap Open.Tap Other Settings.Tap Touch Screen.Tap the calibration circles until the calibration is complete.Tap OK to save and exit.How to Calibrate the Touch Screen - Nintendo Supporthttps://en-americas-support.nintendo.com › detail › a_idhttps://en-americas-support.nintendo.com › detail › a_idSearch for: How do I calibrate my DS Lite Touch Screen?

How do you replace a Nintendo DS shell?

5:449:02Nintendo DS Lite Screen Replacement Directions | DirectFixYouTubeStart of suggested clipEnd of suggested clipUsing a small Phillips screwdriver remove the four screws from the top screen plastics. Once theMoreUsing a small Phillips screwdriver remove the four screws from the top screen plastics. Once the screws are removed pressing the back plastic up in the front plastic down will start to separate the.Nintendo DS Lite Screen Replacement Directions | DirectFixhttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you take apart a DS Lite top screen?

How do I calibrate my 2ds touch screen?

How to remove ribbon cable?

Slide the locks for the small ribbon cables down to the side, and remove the cables.

Can you remove the bottom LCD screen from a Nintendo DS?

After removing the circuit board, the bottom LCD screen can easily be removed from the Nintendo DS.

How many screws to undo 2DS camera?

Once the battery is out you are ready to remove the entire panel. There are 10 screws to undo but before you do keep in mind the camera for the 2DS is attached to both the panel you will be removing and the board under it. So try not to tear the connecting cable.

How to remove a panel from the back of a computer?

Using the screwdriver, undo the two easy to see screws on the back. Then using the prying tool or even your nail, pry the panel away from the middle. There is an indent in the case to help you do this.

How to reattach a ZIF to a motherboard?

Then to reattach the flatflex into the ZIFS, push the flatflex cable into the socket with the leaver up. You don't need to apply much force, hence the name. Then lever the ZIF down into its locking position.

How to put a camera back together?

Once all together all you need to do is put the back panel back on, first make sure the camera is screwed back on. Push it together without screws first and it will click into place, then it all the screws back into place once you are happy with how well it fits together. Last is the battery and battery panel.

Why is my backlight not working?

If the screen or backlight still don't work after reseating them it could be that the replacement screen panel is faulty.

Does the camera work after replacing the screen panel?

For me everything worked well after I replaced the screen panel [and the camera unit since i tore the cable].

Step 1: Open the Case

Remove battery! Gently remove the 4 screw covers on the front face of the top section of the DS. Unscrew all 4 screws. Gently pry apart the two halves of the shell. Set aside the top of the top. Remove the screws holding down both green boards.

Step 2: Detach the Ribbons

READ THIS: Here's the most difficult part of the whole process. You are manipulating small, DELICATE items.

Step 3: Remove the Broken Screen

Move all the various bits and pieces of the DS out of the way. (Hint: I used a piece of wood approximately the same thickness as the DS and placed my components there. This way the wires were given enough slack so as not to damage them.

Step 4: Reassemble With New Screen in Place

Take your new screen, and make sure there's a little adhesive around the edges. I used two layers of double sided tape trimmed to fit.

Repairing Guides