how to repair a ripped subwoofer

^{Subwoofer Rubber Surround Repair}

1. Phillips screws using either a screwdriver or cordless driver. ...
2. Use a flat pry tool (such as a flat-blade screwdriver) to prop up an edge of the subwoofer. ...
3. Use a clean, lint-free cloth to wipe away any dirt/grease/grime that would otherwise tarnish the bond between the rubber and RTV silicone.
4. Time to get dirty. Put on your favorite brand of nitrile or latex gloves. ...
5. Cut the end off a cotton swab in order to transform it into an RTV applicator. ...
6. With the underside coated, put a dab of RTV silicone onto your gloved finger. Gently spread the RTV silicone across the front of the torn subwoofer surround.
Perform this action at your own risk -- you may inadvertently open up the hole again, depending on its size.
Optional Step. After you're done applying the RTV silicone and testing the subwoofer's excursion, shine a strong flashlight through the now-covered hole, and ensure that no light bleeds ...

How to rebuild a subwoofer?

Common problems addressed include:

• Display problems
• Light not working
• Appliance doesn’t chill items
• Failure to produce ice
• Vacuum condenser light stays on
• Frosting builds up around the refrigerator
• Water leaks in the compartment
• Food items experience freezer burn

How much should you pay to install a subwoofer?

Subfloor Costs Per Square Foot

• Plywood Subfloor Cost. Plywood costs around $40 to $50 per 4 by 8 foot panel. ...
• DRIcore Subfloor Panels. DRIcore brand panels are good for basements or other areas prone to moisture. ...
• Amdry Insulated Subflooring. ...
• Tyroc Subfloor Prices. ...
• Subfloor Calculator. ...

How to fix a blown subwoofer like a pro?

Steps to fix a blown subwoofer: A complete guide

• Step-1: Check the voice coil. Before you get started, check each and every part of the subwoofer really carefully. ...
• Step-2: Check the speaker cone. ...
• Step-3: Detach the speakers. ...
• Step-4: Separate the voice coil and speaker cone. ...
• Step-5: Fix the voice coil: It’s fixing time! ...
• Step-6: Fix the speaker frame. ...
• Step-7: Reassemble and fix other components. ...

How to fix a hole in a subwoofer?

How to repair a puncture hole in a speaker?

• shooto. so I punctured one of my speakers with a screwdriver...clean hole about a 1/4" in diameter, mostly in the doped edge of the cone (a tiny bit in the ...
• HoboMan. This happened to me last year and people here recommended using RTV Gasket Sealer. ...
• Darth Tater. ...
• pbradt. ...
• Bob Hawkins. ...
• kelly dell
• Fuchsaudio. ...
• vrdyer. ...
• bluzdoctor. ...
• ddeand. ...

More items...

What can you use to fix a torn subwoofer?

0:328:02Repairing Ripped / Torn Subwoofer Surround - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this e6000 adhesive. And then this jb weld black silicone. With both of these adhesives.MoreSo this e6000 adhesive. And then this jb weld black silicone. With both of these adhesives.

How do you fix a ripped subwoofer surround?

0:335:34HOW TO REPAIR A SUBWOOFER SURROUND! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first of all you're going to identify where the hole is which is just there. And then we're goingMoreSo first of all you're going to identify where the hole is which is just there. And then we're going to flip the sub over go from behind apply some to our fingers.

What kind of glue can I use on a subwoofer?

E6000 in the medium viscosity value will be much easier to apply. Both are made by the same company. For foam surrounds, I use Tacky Glue from the craft section of Wal-Mart. I used E6000 on the spider landing and Tacky Glue on the surround landing when I installed my PSI recone.

How do you fix a torn Bass?

1:002:42Basic bag repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd also then seal the perimeter of that with seam grip. So if you get repair tape you want to getMoreAnd also then seal the perimeter of that with seam grip. So if you get repair tape you want to get the nylon taffeta. Type there's taffeta and rip stop the rip stops a lot lighter use out on jackets.

Can you fix a hole in a subwoofer?

4:2313:47CHEAP FOAM from Walmart | HOW TO Fix a Torn Speaker TutorialYouTubeStart of suggested clipEnd of suggested clipInstead of using some subwoofer surrounds now if ordinarily you could use some scissors. And justMoreInstead of using some subwoofer surrounds now if ordinarily you could use some scissors. And just cut a little piece of this around right off and use it as a patch.

Can a subwoofer be repaired?

Can you fix a blown subwoofer? Yes, you can fix a blown subwoofer especially when it is partially blown sub damaged cone. However, a damaged voice coil will be difficult to replace. Depending on the extent of the problem, the best solution is to purchase a new subwoofer.

Can you use super glue on a subwoofer?

Don't use superglue. It dries extremely hard and brittle. It will crack and break.

What kind of glue do you use to repair a speaker?

Permabond 737 is a toughened cyanoacrylate adhesive that is ideal for use in applications regarding the speaker cone, such as surround to cone, cone to spider, and dust cap to cone parts of the speaker.

What kind of glue is used for speaker surrounds?

Get some E6000 or Go2 Glue from Home depot and glue the tear with a very thin layer of adhesive. ^ This. Clear E6000 (it's available in clear and black color) will work great to fix the surround. Be sure to let it cure for 24 hours after the applicaiton and you will be good.

How do you fix a bag stitch?

0:4214:18How to Sew a Topstitch Repair on Leather by Hand - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I'll show you a quick technique just sew by hand all you need is a heavy-duty hand sewing needleMoreSo I'll show you a quick technique just sew by hand all you need is a heavy-duty hand sewing needle and a thread that matches the top stitching thread on your handbag.

How do you sew canvas rips?

0:005:02Repairing Sunbrella Canvas - Sewing a Patch on Canvas - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe peel off the transfer paper revealing the glue and then baste it in place using a double sidedMoreWe peel off the transfer paper revealing the glue and then baste it in place using a double sided tape for canvas is great because it holds everything in place prior to sewing.

How do you fix a PVC bag?

0:362:37How To Fix Dry Bags | Large Rips and Small Perforations (and ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're going to make this repair at the top of the bag with storm shores tuff tape. This is a self-MoreWe're going to make this repair at the top of the bag with storm shores tuff tape. This is a self-adhesive polyurethane patch and it comes with white backing paper. So all you do is peel the backing

What kind of glue is used for speaker surrounds?

Get some E6000 or Go2 Glue from Home depot and glue the tear with a very thin layer of adhesive. ^ This. Clear E6000 (it's available in clear and black color) will work great to fix the surround. Be sure to let it cure for 24 hours after the applicaiton and you will be good.

What kind of glue do you use to repair a speaker?

Permabond 737 is a toughened cyanoacrylate adhesive that is ideal for use in applications regarding the speaker cone, such as surround to cone, cone to spider, and dust cap to cone parts of the speaker.

How do you fill holes in a sub box?

4:0610:43Every crack has been filled - Subwoofer box finish work - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a lot of drying time in between steps as I'm assembling this box I'm filling any small gapsMoreThere's a lot of drying time in between steps as I'm assembling this box I'm filling any small gaps with wood glue so the glue can sink down into the gap. And add further strength.

Can you tape subwoofer?

I know it's cliche, but duct tape really can fix a wide variety of things. And yes, I have made a temporary repair on a subwoofer with it before, and it works pretty well. Be sure you get some good quality tape, not the cheap stuff.

How To Repair A Subwoofer?

All you need is some tools and ingredients that almost everyone has lying around the house! Cut open your old subwoofer, and you’ll find several different parts: usually, an empty metal box, a broken piece of paper cone attached to a metal coil and some screws.

Repair A Subwoofer: Instructions

Measure the entire length of the paper cone that is attached to your broken subwoofer. Write this measurement down somewhere – it’s essential you stick to it when making a replacement cone!

Is It Worth Repairing A Subwoofer?

The short answer to this question is no. The repair is likely not worth it.

How Do I Ensure My Repairs Are As Substantial As Possible?

By making sure that the coil is fully attached to your subwoofer’s paper cone, that you remove all of the old glue from both parts before applying new glue and using a heavy object while they dry. You may also want to check out this guide for more information on how to repair speakers:

How Do I Stop A Subwoofer From Shaking?

If the unit is new, there may be something wrong with it. If that’s not the case, consider placing the subwoofer on top of a coaster or another piece of soft material to dampen the vibrations.

How Do I Fix A Subwoofer That Only Makes Buzzing Noises?

This can be caused by a loose wire connection or something rubbing against the cone (including excessive dust build-up). You may also want to clean out your unit with compressed air and check all of the connections are tightly in place:

How Do I Stop My Subwoofer From Making A Humming Noise?

Place it on top of something soft, like a coaster or another piece of material, and check all wire connections inside. You may also want to check out this guide for more information on how to deal with humming speakers:

How Does A Home Theatre Subwoofer Work?

Let’s determine whether we can fix your old subwoofer by familiarizing ourselves with some principals about how the subwoofer works and looking at the parts that make a subwoofer. Then we can go through a quick and dirty checklist, and grab some tools.

Helpful Subwoofer Fixing Tips – Getting Down To Business

You need to decide now if you are comfortable taking your subwoofer apart. Well not right now! Finish reading this article. Almost everything can be done by anyone with a little patience and help. The help is there for the asking, most Speaker manufactures have Technicians who are happy to help you with the unique troubleshooting for your Sub.

Step 1: Supplies

Scissors, wax paper, and some kind of silicone glue (shoe goo works great also)

Step 3: Silicone

Apply light amount of silicone to both sides of tear in the foam, and lay the wax paper over it.

Step 5

Remove wax paper. If too little silicone was used and foam is still torn re do from step 1

Step 6: Testing

After drying go ahead and set your subwoofer back up to your stereo and play music with little bass and low sound too monitor your sub. Slowly raise the volume until you feel it is safe. If tear opens again, try again with more silicone.

Introduction

I realized — a little too late — that a couple of retaining clips were rubbing against the top of the subwoofer/enclosure in my car. One clip was (thankfully) scratching the subwoofer enclosure carpet, but the other one had poked a hole on the subwoofer's rubber surround.

Step 1 Subwoofer Rubber Surround Repair

Assess the damage. Depending on the severity of the cut, you may need some other scaffolding material (aside from RTV silicone) to enclose the hole.

Step 2

Unscrew the eight #2 Phillips screws using either a screwdriver or cordless driver.

Step 3

Use a flat pry tool (such as a flat-blade screwdriver) to prop up an edge of the subwoofer.

Step 4

Use a clean, lint-free cloth to wipe away any dirt/grease/grime that would otherwise tarnish the bond between the rubber and RTV silicone.

Step 5

Time to get dirty. Put on your favorite brand of nitrile or latex gloves.

Step 6

Cut the end off a cotton swab in order to transform it into an RTV applicator.

Phenom II

Ive popped my sub on my surround system, and it has torn the speaker perfectly round the edge of the speaker about 1/3 of the way round

Phenom II

with the amount of power you are sending to it, its going to keep ripping. it sounds like you need a better sub

Phenom II

With the amount you spend on alcohol a night, you could take a night off and pay for a replacement

Southern Patriot

Ooh.. you might be on to something there... I dont have any, but wil get some

Phenom II

I know it's cliche, but duct tape really can fix a wide variety of things. And yes, I have made a temporary repair on a subwoofer with it before, and it works pretty well. Be sure you get some good quality tape, not the cheap stuff.